Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Swap out the wheel holders on your Curt platform bike rack (C18084, C18085, or C18086) with these larger hoops so that you can carry 1 fat tire bike. Fits tires up to 4-7/8" wide. Installs with hand knobs - no tools or extra hardware needed.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Fat Bike Adapter Kit for Curt platform bike racks, part number C18091. This kit is going to allow you to take your Curt two or four platform style bike rack and adapt it to carry fat tire bikes. It comes with two cradles that will carry a tire up to 4 7/8 inches wide. It's going to replace your existing cradles, but hang on to these because you can easily swap them when not carry fat tire bikes. It has the same finish and style as our existing bike rack, so it's going to fit in seamlessly. Now that we've got all the features, I'll go ahead and show you how easy these are to get installed.
Now, you're going to get two cradles per kit. You want to be sure and pick up one kit for each fat tire bike you have. First thing we can do is go ahead and loosen up our standard bike cradle. We're going to slide that off, then we'll take our fat bike cradle, be sure that it's loosened up, then we'll slide it on to however the size of our wheelbase is, and then tighten it up. For the opposite side, it's not a bad idea to stagger your cradles. That way, one set of cradles is not trapped on the inside.
Now, loading up our fat tire bike is just as easy as loading up a regular bike. We'll just set it in the cradles and then lower down our center hook. Great. Now, we can just load the rest of our bikes the way we normally would. That's going to complete our look at the Curt Fat Bike Adapter Kit for Curt platform bike racks, part number C18091..
Average Customer Rating: 4.7 out of 5 stars (43 Customer Reviews)
Swap out the wheel holders on your Curt platform bike rack (C18084, C18085, or C18086) with these larger hoops so that you can carry 1 fat tire bike. Fits tires up to 4-7/8" wide. Installs with hand knobs - no tools or extra hardware needed.This is not the item I ordered. The hoops are 3 inches wide.The item I ordered was hoops four and seven eighth inch wide to fit a fat tire bike. I'm very disappointed
They worked great for my fat tire bikes,
Timothy
10/28/2023
They work great
I originally purchased my trailer hitch bike rack that handles standard size tire bikes. Recently I purchased a fat bike and my rack would not accommodate the large tires. Enter Etrailer, they sell fat tire rack adapters that slide right on my bike rack. That saved me from buying a new bike rack.
Dave
11/30/2022
These have worked great for me. Ive upgraded my bike rack so no longer using them.
Perfect fit for my existing bike rack. I would recommend a velcro strap for securing the bike wheel to the adapter.
Scott
11/25/2022
It works quite well. I use it for my Aventon Aventure E-Bike which weighs about 80lbs.
I got these to use on my swagman rack, and they fit OK, but are loose fitting. I was able to get them to fit tight by using 1/16 inch flat metal as shims. However, the hoops have a plastic sleeve so it is not a solid connection and have some give with the weight of 2 bikes on them. I suspect this would be true if they are used on a curt rack also. One of the hoops is welded at not a perfect 90 degree angle, so it droops a little.
Mike L.
8/22/2022
Actually, the wheel hoops dont need to be super-locked down tight. As long as theyre snug enough to stay in place, youll be good to go.
Did exactly what I needed them to do, as I needed to replace one set off my bike rack to accommodate a fat tire bike. They work like a champ!
Hold bike well but do both tighten fully on the cross bar of my Swagman carrier. Need to retoghten after every use.
Worked on a HOLLYWOOD bike rack perfectly. E trailer did good again
Needed replacement tire loops for the 4" wide fat tire bike. The Hollywood bike carrier I had only worked on the 2" width tires. Now have option for both widths of bike tire. Very easy to install and works great!
Does what i needed it to do which was carry around my rad rover 5 fat tire :) thanks!!!
This item fit my bike carrier, now I can carry both style bikes at the same time. Standard size tire bikes and fat tire bikes (electric Rad Rover) Recommend that you check this item out.
Fits perfect on my rack and my electric Ebike fits perfect to haul.
Our 4" fat bikes fit well and we can now take them on our bike rack. Great product and super helpful customer service!
Fits any 1 1/4" square tube bike carrier to include the numerous china imports and the Swagman XTC2
Fantastic Transaction, outstanding communication. I will definitely order from you again next time !
The hole is two large for my bars but I can adapt them I am sure by putting tape around my bars.
Arrived on time I love it thanks!
Works great with my RadRunner fat tire e-bike
Fits and works very well,loaded the bike today every thing went well.
Worked out great for my 4.8” tires
Did exactly what they said they would d o.
Fits bike tire well. Fast Delivery!
Very efficient and great product. Arrived on time and will use you again
I was so pleased with the help I got from this young lady she is a wonderful asset to the company
Just what I needed for my New 4" Tire E Bike, PERFECT! Sorry No pictures just yet.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
12/20/2021
Customer Service will reach out to you.