To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This jerry can mount lets you carry fuel so you can fill up when you're off the beaten path. Works with 5 gallon NATO-style or Scepter fuel cans. Installs on your factory or MORryde spare tire carrier.
Features:
Specs:
Note:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out this spare tire mounted jerry can holder for Jeep Wranglers. This is from MORryde, and this is gonna be a good way, to get that fuel canister, outside of your vehicle, and store it on the outside. That way, you don't have to smell the fuel while you're driving around, if you have to top up, you know. It's also gonna make more room, for more stuff in the Jeep, rather than this taking up that much space. Let's check it out.
This is gonna hold most NATO style jerry cans, up to five gallons. We have a five gallon one in there today. It comes with the ratchet strap, that's how we get it nice and tight, and not to move. There is a little space around the outside of the jerry can, but that's intended, so that these folks can get into there, and get into the mounting spots. That way it holds it nice and tight, so you can get that in there, you don't have to worry about scratching the can while you're doing that, and that's on the front and the back, that they hook in there and then you can latch it down.
This one also has side walls, on both sides. If that's something that you don't want, there is another one that they offer that is just more of a flat platform for the jerry can to sit on. I will say, that it's pretty sturdy, you can hear that, it's really solid construction. It's black powder coat steel and even the mounting options, you know, with the spare tire on there, this extended out, the bolt's in there, no rattling around, it doesn't move. I can shake the whole Jeep back and forth, and this isn't gonna move at all.
Another thing that's pretty convenient, and we left if like this on purpose, is we left a little bit of space in here. That way you can get in there with the impact, and use the same fitting that I would use for the lug nuts, to loosen this up, so when you're not using it, you can just take it off, and remove it. We said it would fit a five gallon jerry can, but I'm gonna go ahead and give you some dimensions. That way, you know specifically, how much you can hold. So, let's go from side to side, it looks to be about 14 inches and a quarter, and then we're gonna go from front to back, looks like seven and a quarter inches there, and then let's look at the side wall height,' go from the bottom to the top, looks like to be a nice six inches.
I think this is a good addition to your Jeep, especially if you don't wanna haul the gas can, inside the Jeep. Either you get limited space in there, or you just don't want the gas in there, you don't wanna be smelling it. You put it out here on the outside, and it's not gonna bother you at all. It's gonna stay in place, with that ratchet down, this thing's not going anywhere. Well, I think that does it, thanks for hanging out, and I hope this helped..
Dry easy to install and looks great
It is seated really well, no rattle. Easy to install
Great product. Heavy duty.
Mounted on my CJ7 in five minutes with no modifications. Carries my Jerry can securely. Great product and service!
This suits our purpose perfectly to extend our range in a 2001 Jeep Wrangler Sport and provide a little piece of mind with an extra 5 gal Jerry can. We use it in "the Maze" and in the other wilds of Utah. The tray is easily removed/reinstalled with the lug wrench.
Price from e-trailer was 2/3 what everyone else wanted. Shipping was prompt. The mount itself takes back about two inches of clearance, so I’m not sure if I’ll continue using it, but us well made and easy to install.
Decent product strap holes are small making strap removal difficult. Rubber vibration stop always falls outwhen inserting Jerry can. Drain holes need drilled out bigger. Not an issue unless you use cans Alot like I do.I modified the above issues for heavy every few days use.
This is a very well-built product, I like that I can remove the carrier trays when I don’t need them. I have one mounted on each side of my jeep, one for water and one for extra fuel.
Great product, super fast shipping and as always we received a followup email from George to make sure all was good with our order. Awesome company to do business with, Thank you guys!!!
Took a fair amount of time to install. Worth it in my opinion.
Took a long time for them to get it in stock. Shipped right away once it was in stock. Bolted right up as it should. Holds a fuel or water can very securely.
I added a ubolt and security cable. The holes for a ubolt are predrilled.
Easy install, looks great and well made , sturdy. A couple of minor concerns, the jerry can that I purchased only fits at an angle and opening the door will rub against the tray so you need to be careful. Otherwise a great product!
Does exactly what I need it to! It was quick and easy to mount to the frame, it looks great, and it holds the Jerry Can perfectly.
I get a lot of compliments from everyone who notices the two , 5 gallon tanks stored on each side of my Rubicon hybrid. They usually say they’ve never seen gas cans stored on the side of the jeep, It’s usually in the very back.. My jeep is green with the light blue accent that hybrid vehicles typically have… So I had pinstripes in that same color on the black cans, which makes the whole vehicle pop. These are quality built and rugged storage units that bow to the Jeep easily, and would recommend them for anyone going out quite a distance and would need to have the extra gas.
I ordered this Jerry can holder to get the spare gas can (and smell) out of the Jeep. It worked great and was easy to install. It's easy to adjust and sturdy on the trail. It's mounted on the spare (33") and does not obstruct the view from the rear view mirror. I would recommend this product.
This thing is beautiful. The mount is heavy steel plate with another heavy steel backing plate with a 1" solid steel bar welded front and back. The weld beads are excellent. The extra backing plate doesn't extend out to the bolt holes so I shimmed the bolts by stacking washers, 4 standard 1/2 inch washers on each bolt leveled it out perfectly. I added spring keepers to the bolts to make sure it doesn't fall off and break my foot when I need to dismount the spare. The frame that holds the pan mounts to the bar with a 1/2" grade 5 bolt, washer and lockwasher. The channel of the frame is so tight to the bar that I had to tap it on with a mallet the first time. Once it's bolted down there is no wiggle at all. It came with mismatched bolts and nuts to mount the pan. I emailed after hours and when I logged on the next morning had a response offering to send me another hardware pack, so I'd say cs is first rate. Attaching a pic of the mount and a completion pick with my 10l fuel can.
Just received my tank carrier. Excellent build quality. Easy to install. Super quick shipping. 5 star
Do you have a question about this Jeep Storage?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Luis
8/26/2025
The only negative thing I can say about this after a year of use is that there is no padding on the rear vertical surface that is in contact with the jerry can. This is rubbing the can and wearing off the paint which I imagine will start to rust. I added some self adhesive rubber and it helped.