Recommended Stabilizer Jacks for Beneath a Toy Hauler's Garage
Updated 08/16/2026 | Published 08/12/2026
Products Featured in This Question
Question:
I have a 2022 Wolf pack 5th wheel toy hauler. Its 42 in length and has a 6 point auto leveling system. The problem I have is the 13 garage has nothing under it the last jacks are directly behind the rear tires and I would like to stabilize this area to take the sway, bounce, etc out of it while camping. What would you recommend to do this? Im ok with it being manual.
asked by: Steve k
Expert Reply:
Welcome back Steve. To add a set of rear stabilizer jacks to your 2022 Wolf pack 5th Wheel Toy Hauler, I recommend our etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter item # e96VV. These will definitely take care of that sway and bouncing feeling. These are manual but can be controlled by a drill with the included adapter.
The etrailer Scissor Stabilizer Jacks item # e96VV are only 4" tall when retracted and bolt directly to your Toy Hauler's frame. These have a combined 15,000 lbs capacity which is exactly what you need for your rear garage. The extra capacity is necessary for loading an unloading your garage and the extra foot traffic.
The etrailer Scissor Stabilizer Jacks item # e96VV can extend up to 24" but I've never seen a toy hauler with that much clearance at the rear end so these will be plenty capable. Not being extended all the way does not limit their capacity.
What do you haul in your rear garage and do you use the space for anything else once you get it unloaded? Feel free to answer this and throw in any other questions you have, where it says Add Comment.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 15,000 lbs - Qty 2
- Camper Jacks
- 5th Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Scissor Jacks
- Steel
- 10001 lbs or More
- Drill-Powered Jack
- Manual Jack
- 24 Inch Lift
- Bolt-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 15,000 lbs - Qty 2
- Shop: Classic Accessories Toy Hauler Screen for Fiberglass or Aluminum Toy Hauler
- Shop: RV Interior Lighting
- Q&A: What is Retracted Height of etrailer Scissor Jacks
- Q&A: Highest Capacity Scissor Jacks
- Q&A: Best Replacement AC for Dometic Duo Therm 57915.531
- Q&A: Best Way to Level a Class A Motorhome at a Curb
- Q&A: Outer Diameter of Weld-On Pipe Coupling on Trailer Valet JX Trailer Jack
- Article: Trailer Lighting Requirements
- Q&A: Recommended Stabilizer Jacks for a Rpod Trailer
- Q&A: Is Timbren Rear SES Available With Lower Capacity for 2022 Ram 1500
- Article: What Do I Need To Tow A Trailer?
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: How to Measure for Trailer Hitch Drop
- Article: Converting Your RV Water Heater to Tankless
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
Steve K.
8/14/2026
It hauls a golf cart and sometimes a sxs. I usually have 4 to 6 guest also sleeping back there, (2 in each bed and a king air mattress on the floor) I was looking into the lippert manual system (I can't think of the part number) but didn't know much about it. I know the lippert system uses one central screw for both Jack's (they are tied together) what do think about this option?