To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is ready for real work and weekend fun. With a 3,500 lbs maximum gross trailer weight and 350 lbs maximum tongue weight rating, it handles light to moderate towing with ease. The 2" x 2" receiver fits most bike racks, cargo carriers, or small trailers, so you can haul your gear without second-guessing the strength of your setup.
You don’t need a lift or special tools to get it mounted. The fully welded receiver bolts right onto the frame using the complete hardware kit that comes in the box. The precision fit means the holes line up how they should, and you can knock out the install with basic hand tools. For single-person installs, that alignment makes all the difference.
The matte black finish isn’t just for looks—it resists rust and corrosion better than a standard glossy coating. It’s tough enough to hide dirt, scuffs, and dings from everyday use while keeping a rugged style that blends in under the bumper. The sturdy, square-tube steel design gives it a solid feel that lasts through years of towing and hauling.
Every weld is done by a robot for maximum strength and a clean fit. That tight tolerance means less hassle during installation and long-term durability once it’s on your vehicle. It’s a simple setup built to do its job day after day without flexing or loosening up over time.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
It works great and was easy to install.
Always excellent product and service.
Item was as advertised, fit perfectly.
GREAT FITS PERFECT!
Quick delivery. Easy install
Everything was great with this product, except it got bent at some point. And it was a real mother to get it straight enough to fit the bolts on the driver side. Super strong product, probably shipping damage..:(
Looks to be good quality - made in USA! Install went good. Did it by myself .
quick delivery and easy installation. fit perfect!
really great little hitch. fits perfect on my ‘06 CRV. easy to install even by yourself (or at least that’s what my boyfriend said when he installed it for me haha)
Quick service. I have purchased 6 or 7 hitches from this seller and don't even seriously consider other sellers now because of their good prices and quick delivery and no excuses
Easy installation. Fit perfectly
Nice fit, pretty easy to install
The nuts that thread onto the U-bolt were too wide to both fit at the same time, I had to go buy nuts with a narrower outer diameter. Having 4 of the fish-wire installation tools instead of 2 would have helped.
Excellent product and very proud customer. Excellent customer service. The hitch has been used quite a few times since the purchase. 10 out of 10. I highly recommend.
Great quality!! And, the items included, made the installation go perfectly! I would definitely recommend ordering here!!
I bought this trailer hitch for my father in law for his C+RV and he really likes how well it works. Money well spent.
Works great , fast shipping, would purchase again
Support was wonderful to deal with I highly recommend this company. Thanks so much.
Easy install, works great with my vevor 600lb motorcycle carrier and drz400sm, everything lined up perfectly, coating looks decent, we'll have to see how it stands up to salt this winter, but over all build quality is 10/10
Installation went well. As per instructions stating that slight modifications may be necessary, I did need to drop the tail-pipe/muffler hangers again and dent the muffler top slightly to eliminate a rattle/chatter. The unit has good welds and finish.
Super great , parts fit no problem
The receiver arrived bent. I see from other comments this is a common occurrence. Wasn't visible until I had already got it mounted up in the vehicle and couldn't get one side bolted. Still haven't managed to get it unbent. Not sure why this is so common or deemed to be acceptable.
Kate F.
11/19/2025
I understand your concern Alexander, it can definitely be frustrating to run into that when installing your hitch. The hitches are built from heavy, high-strength steel that’s designed to have a bit of flex. This helps absorb stress and prevents damage to your vehicle’s frame over time. Because of the thickness of the steel and the tight tolerances at the mounting points, even a small amount of flex from shipping can make the bolt holes hard to line up. You can usually correct this by using a sturdy object (like a long pry bar or a jack and a block of wood) to gently flex the side plate back into position. Once aligned, it’ll bolt up securely and function just as intended. This minor adjustment doesn’t affect the hitch’s strength or safety.
The hitch finish is great, it looks awesome. But apparently the hitch bends very easy. Hitch was bent in shipping box or elsewhere because the left side did not line up at all. The hitch mounts seem flimsy ish. I was able to get the exhaust side bolts in place and the nuts started but then had to use a pry bar and a Jack stand to get the holes lined up enough to get the bolts through on the left side, they were off by a whole 1/4 to 3/4” of an inch back and front hole respectively. It seems the mount was bent in towards the right side of the car instead of being straight to line up with the bolt holes. It was tricky not to lose any bolts in the frame while installing since they only provide you two Fishwires to keep tabs on the bolts. My car has never been in any rear accident so I don’t think it was my cars issue. Either way, I’ve been wrenching 20+ years and it was nothing I couldn’t handle to get installed. Took me roughly 30 min with a lift. Now I’m ready to haul my sled this year!!
Brooke M.
12/5/2022
It sounds like your hitch may have been flexed during the shipping process. I am happy to see that you were able to get it mounted anyway and that it is serving you well! If you find yourself in this situation again where you are needing to correct a flexed hitch, check out the article I have linked below. It goes over a few different ways you can straighten a flexed hitch.
Helpful Links
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
2/2/2025
The hitch has been consistently reliable and has maintained a good appearance. We mostly use it to mount our e-bikes rack and e-bikes