bing tracking image
  1. Trailer Hitch
  2. TorkLift
  3. 2 Inch Hitch
  4. Class V
  5. 17000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2010 Mercedes-Benz C-Class
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift

TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers

In Stock
$829.98
Trailer Hitch
Not Confirmed to Fit

2010 Mercedes-Benz C-Class

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions. Great Prices for the best trailer hitch from TorkLift. TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers part number TLC1208 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (0)
  • Photos

TorkLift Trailer Hitch

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Dual 2" Receivers: Lets you tow a trailer and use a bike rack or cargo carrier together
  • Handles up to 17,000 lbs (GTW): Supports heavy-duty towing for large trailers and loads
  • Carries up to 1,700 lbs (TW): Works with weight distribution up to 2,000 lbs for balanced towing
  • Pre-Drilled for Camper Tie-Downs: Simplifies setup when using slide-in truck campers
  • Bolt-On Steel Construction: Dual-shield welded design installs easily and stays strong under strain
Made in USA

Features to know about

Tow Heavy Loads Without Losing Cargo Space: Dual 2" Receivers for Maximum Utility

The SuperHitch Original is built with two vertically stacked 2" receivers so you can tow a trailer and still run a hitch-mounted bike rack or cargo carrier at the same time. It’s rated for 17,000 lbs maximum gross trailer weight and 1,700 lbs maximum tongue weight, or up to 20,000 lbs GTW and 2,000 lbs TW when used with weight distribution. The dual design keeps your setup strong and stable—no capacity loss like you’d see with an adapter or standard extender.

Keep Your Camper and Trailer Connected: Pre-Drilled for Camper Tie-Downs and SuperTruss Extensions

This hitch is designed with truck camper setups in mind. It’s pre-drilled to accept TorkLift camper tie-downs, so you can secure your slide-in camper without extra fabrication. The top receiver works with SuperTruss extensions (sold separately) to clear your bed-mounted camper while maintaining high towing strength. Even with a 48" extension in use, it handles up to 6,000 lbs GTW and 600 lbs TW, making it a reliable option for hauling both your camper and trailer together.

TorkLift SuperTruss hitch extension connected to a SuperHitch on a pickup with a truck bed camper, showing extended clearance for towing.

Built for Serious Work: Heavy-Duty Steel Construction With Reinforced Pin Holes

The sturdy steel frame features high-penetration, dual-shield welding for long-term durability. Hardened, reinforced hitch pin holes help prevent elongation from wear when towing heavy loads. A black powder coat finish adds corrosion resistance for long-lasting use in demanding conditions. Safety chain loops are built in, and the bolt-on design means no welding is required during installation.

Ready for Everyday Towing: Class V Strength and Lifetime Support

With its Class V rating, this hitch is made for heavy-duty towing jobs where lesser hitches just won’t cut it. It’s compatible with standard ball mounts and hitch accessories, giving you flexibility for different trailers or carriers. Two hitch pins and clips come included so you can get set up right away, knowing the hardware matches the hitch’s strength.

Specs

Receiver Specifications

  • Receiver openings: 2" x 2"
  • Rating: Class V

Diagram of TorkLift SuperHitch Original dual 2-inch receiver showing labeled features and components of the heavy-duty trailer hitch.

Weight and Capacity

  • Maximum gross trailer weight: 17,000 lbs
  • Maximum GTW when used with weight distribution: 20,000 lbs
  • Maximum tongue weight: 1,700 lbs
  • Maximum TW when used with weight distribution: 2,000 lbs

Dimensions

  • Cross tube dimensions: 3-1/2" x 3-1/2"

Warranty

  • Lifetime warranty

C1208 Tork Lift Original Super Hitch with 2 Receivers

Item # TLC1208



This Product Fits The Following Vehicles




Ratings & Reviews

5.0

2 reviews
Review sort icon
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.

by:

Easy ordering, very good updates, prompt delivery



by:

went on real easy. had no problem with it and recommend it. TorkLift makes great products. My truck has all TorkLift products on it.


2
2

See what our Experts say about this TorkLift Trailer Hitch

  • Hitch Extender Recommendation Towing 7,500 lb Trailer
    If you use the Reese Elite hitch extender part # RP45292 in your 2-1/2 inch hitch at the 24 inch length with a weight distribution system you'd have an 8,000 lb capacity. That would be the only way to get an extension with the needed capacity. For a properly rated weight distribution system then you'd need the Reese Steadi-Flex kit part # RP66560 which has integrated sway control and you'd be set.
    view full answer...
  • 36 inch Long Hitch Extension for Use with 2013 Chevy Silverado Towing 7500 lb Trailer
    For towing a trailer that heavy and needing a hitch extender that long you would have to use the Torklift hitch extender part # TLE1536 that you referenced. To use this extender you would also need to install a Torklift hitch like the part # TLC1208 for if you have a long bed truck or part # TLC1209 for if you have a short bed truck. There isn't a similar length extender with the needed weight capacity that would work directly with your Class IV hitch.
    view full answer...
  • Best Weight Distribution System for a TorkLift SuperTruss Hitch Extension
    It looks like you have the Original model TorkLift SuperHitch item # TLC1208 on your 2011 GMC Sierra 2500. When used with the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 32" Long item # TLE1532 this hitch has a capacity of 6,500 lbs without weight distribution and 12,000 lbs with. The tongue weight capacity increases from 650 lbs to 1,200 lbs too. You will definitely want to use a weight distribution system when hauling your Lance 855s camper. I recommend...
    view full answer...
  • Heavy Duty Trailer Hitch Receiver Fitment On a 2012 Chevy Silverado 2500HD with Utility Bed
    I reached out to Torklift to see if they had any fitment information on their SuperHitch Original Trailer Hitch Receiver # TLC1208 for your 2012 Chevrolet Silverado 2500 with a utility box. They said while they did not have any fits for different utility beds that the top receiver on their hitch mounts in the same location as the factory receiver. So if you still have the factory receiver on with your utility bed you will be able to use this receiver. If the receiver was removed to make...
    view full answer...
  • Correct Camper Tie Downs for 2013 GMC Sierra 2500/3500 Crew Cab 8' Bed with TorkLift Hitch
    The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2013 GMC Sierra 2500/3500 Crew Cab 8' Bed Without Steps/Bars Under the Bed and with the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLC1208 is part # TLC2219 for the front and part # TLC3212 for the rear.
    view full answer...
  • How To Obtain 60" Hitch Extension for 2011 GMC Sierra 2500/3500 for Towing with In-Bed Camper
    The only trailer hitch extension available in a 60" length is the TorkLift SuperTruss Hitch Extension part # TLE1560 which then must be used with the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLC1209 for models with 6-1/2' bed or part # TLC1208 for 8' long beds. That said, this is going to be your only option. It will provide you with a 5,000 lb gross trailer weight rating. You'll also need the TorkLift Wiring Harness Extension part # TLW6060.
    view full answer...
  • Can 2011 GMC 3500 Sierra Tow 5 to 7k Trailer with 42 inch Extension
    To use a SuperTruss Hitch Extender part # TLE1542 which has a 42 inch length and tow a trailer that weighs 5,000 to 7,000 you'd have to have the Torklift Superhitch part # TLC1208 installed on your 2011 GMC Sierra 3500. Then you'd have to use a weight distribution too like the Reese part # RP66541.
    view full answer...
  • Capacity of TorkLift SuperHitch Original TLC1208 w/48" Extension on a 2013 Chevy Silverado 3500
    Yes! With the TorkLift SuperHitch Original # TLC1208 installed on your 2013 Chevy Silverado 3500 and using the 48 inch SuperTruss extension # TLE1548 the hitch will have a capacity of 6,000 pounds gross trailer weight and 600 pounds tongue weight. The estimated combined weight of your trailer loaded with the tractor is 5,000 pounds with a tongue weight that will likely be under 600 pounds so this set up will work for your application. I also recommend TorkLift Wiring Harness Extension...
    view full answer...
  • Will Installation of TorkLift SuperHitch on 2011 GMC Sierra 3500 Long Bed Interfere With Spare Tire
    The TorkLift SuperHitch # TLC1208 and SuperHitch Magnum # TLC1208-30 designed for your 2011 Sierra 3500 will not interfere with the spare tire. The spare will have to be lowered or removed for installation but you can reinstall it once the hitch installation is complete.
    view full answer...
  • Hitch Adapter Or Extension Compatible With Weight Distribution System
    The use of an extension like the Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 6" Long # HR26 will not work with a weight distribution system. The use of an adapter like this reduces the tongue weight by 1/3 to 1/2 depending on the actual extender and is not intended for use with weight distribution. If you just need the reducer for your system, I recommend the Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2" # C45405 which will make things compatible as long as you...
    view full answer...


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.