bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: 24757
In Stock
$194.18
Retail:$294.81
You Save: $100.63
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24757 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (123)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 24757

  • 1-1/4 Inch Hitch
  • Class I
  • 2000 lbs GTW
  • Visible Cross Tube
  • 200 lbs TW
  • Draw-Tite
  • For Towing

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24757 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60816 Hidden Hitch Class 1 Trailer Hitch Receiver

Replaces 24749

Installation Details 24757 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

123 reviews
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Rec'd in record time. Thanks for the great service. Pictures to follow.



by:

Very easy to install. Only trouble was getting around the exaust.



by:
2009 Hyundai Sonata

Quick shipping and the hitch when on perfect.



by:
2006 Hyundai Sonata

30 minutes to install receiver and wiring harness. As described no problems.



by:
Hyundai Sonata

Was fairly easy to put on my Hyundai Sonata. I found it easier to put one bolt on the side first (not tighten it) to help support putting on the middle support.



by:

Very nice! The shipment came early and fit on my car with no modifications, like it was made at the factory. Thanks.



by:

Good Products at a good price. I was amazed how well they followed up on the shipping. They sent me e mails every step of the way. What a Great Company! Dietrich from West Bend Wi.



by:

thank you it ws very easy to install and i had to do it in my drivway on the dround
your right about the time it taked just 45 min for me to do it
now i will see how it will tow my small 14 ft boat
as it seems it will do great
thanks again



by:

PRICE WAS RIGHT, IT CAME ON TIME, ITEM LOOKS JUST LIKE WHAT I ORDERED. HAVEN'T INSTALLED IT YET BUT FEEL FROM THE MOVIE ON INSTALLING, IT SHOULD BE A BREEZE



by:

Arrived quicker than expected. Easily installed in about 20 minutes. Meets up to it's name, you can barely tell it's even there. Fit perfect.



by:

Great hitch, easy to installVery good quality hitch, super value and easy to install.



by:

very easy installationfit was perfect,everything lined up and was very easy to install.



by:

I'm very happy with my products and the folks at etrailer!



by:

Everything went fantastic. Shipping was great. Instructions were great. Assembly was easy. I am very pleased.



by:

Received product quicker than expected. Great quality. Installed in the approximate time stated in the instructions. Thank you.



by:

First off, the shipping upgrade was a nice touch. Thanks. Got the package this afternoon, and in a little less than 30 minutes had it installed. It's a little tight turning the ratchet (could have used a pneumatic ratchet) but everything fit fine. Thanks for delivering a great product.



by:

Good product, easy instalation with help from viewing online video at etrailer.



by:
2007 Hyundai Sonata

Well made hitch. Es Easy to install, as was the
Auto wiring kit.
Quick, and I mean quick delivery.
Thank you.

Bob Homrich



by:

Excellent HitchVery easy installation on a car with little space for a hitch. Also very good looking hitch
that is very hidden.



by:

Better than expectedGreat product and super simple installation. Videos made the installation a breeze. Couldn't ask for anything better!



by:

fit just fine and the video help greatly ,will recomend your product to any one needing a hitch or other parts thank you ,gordy



by:

Very easy to install. The hitch could have been packed better. It arrived with the box torn and scratches on the hitch that will eventually rust. Delivery was very quick.



by:

I got the trailer hitch in a short time Like the video said it takes about 30 mins.and it did I want to thank etrailer for fast service and the great job the call center does. I will let my friends know about etrailer.

Thank you,
JON



by:
2009 Hyundai Sonata

I received this in just a few days for regular shipping. Instalation was simple. I did have to use a smaller ratchet for the bolts near the exhaust as space is limited for your hand. I would recomend this for a Hyundai Sonata.



by:
2010 Hyundai Sonata

Hitch arrived on tme and in great condition. Installation followed your online video exactly. I knew in advance what had to be done, what tools to have ready and how long it would take. This was an excellernt experience.


25
123
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Size of Install Bolts that Come with the Draw Tite Hitch 24757
    The included bolts that the part # 24757 uses for installation are M10 x 1.25 x 40mm Hex Bolt. For a full replacement kit for the hardware for this hitch you would want part # RHK. You would need to enter the part number for this hitch and select Draw Tite as the manufacturer.
    view full answer...
  • What Do I Need to Tow a Motorcycle Trailer with a 2007 Hyundai Sonata
    The components needed to tow a trailer include a trailer hitch receiver, ball mount, pin and clip, trailer hitch ball, and a wiring harness. I have included an article which covers this. To get your 2007 Hyundai Sonata ready for towing, I recommend the following: Trailer Hitch - Draw-Tite Class I Trailer Hitch Receiver, # 24757. This is a custom fit hitch offering a 2,000 lb towing capacity and bolt-on installation. No drilling or welding is required. Ball Mount - Sportframe Drawbar,...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2009 Hyundai Sonata
    The Draw-Tite trailer hitch # 24757 fits all models of the 2009 Hyundai Sonata. To use this hitch with a bike rack, you will not need the ball mount, pin, or clip. You just need the hitch and a compatible bike rack. I have included a link to a video showing a typical installation for you. This is a Class I trailer hitch so you have to use a bike rack that is Class I compatible and you will be limited to carrying 2 bikes at most. The reason is because the weight of additional bikes will...
    view full answer...
  • How to Determine Departure Angle For 2008 Hyundai Sonata Trailer Hitch Receiver
    In order to determine the departure angle with the Draw-Tite Sportframe Trailer Hitch Receiver # 24757 installed on your 2008 Hyundai Sonata more information would be required. Although we know the distance from the top of the inside of the receiver to the ground, which is 10-1/2", the distance from the "impact point" to where the tire contacts the ground is unknown. If you're truly going into a 45 degree angle then this would require a distance of approximately 11.3" from the point where...
    view full answer...
  • Drawbar that Comes with a Class 1 Trailer Hitch Receiver for the 2006 Hyundai Sonata
    Hidden Hitch, item # 60816 (no longer available), comes with drawbar, item # 3592. This drawbar has a 2-1/8 inch rise and is to be used in the rise position only on your vehicle see instructions. Class 1 hitches are factory tested for safety and the recommended drawbar is the only drawbar that should be used for that vehicle, in the position recommended.
    view full answer...
  • How to Order Replacement Hardware for Draw Tite Hitch part # 24757
    To order replacement hardware for the part # 24757 we have the part # RHK that would cover everything. You would just need to put in the part number you need for the hitch and then select the manufacturer Draw Tite. The bolts that came with your hitch are M10 x 1.25 x 40mm Hex Bolt and the U-bolt is a 3/8-16 U-Bolt.
    view full answer...
  • How Involved is the Installation of Draw-Tite Trailer Hitch # 24757 on a 2009 Hyundai Sonata
    You would only need to remove this appearance panel to install Draw-Tite hitch # 24757 if your 2009 Sonata does not have dual exhaust. The referenced panel is basically a cover-up piece for the area where the second exhaust pipe would have been, and it should not be difficult for you to access or remove. If you do have this panel, you would simply take it off by removing the seven fasteners that attach it to the vehicle. Once the appearance panel is out of the way, the installation for...
    view full answer...
  • Trailer Hitch and Vehicle Wiring Recommendation for a Single Exhaust 4-cylinder 2006 Hyundai Sonata
    Yes, the Draw-Tite Class I trailer hitch will fit all models of the 2006 Hyundai Sonata, including your 4-cylinder with single exhaust. Our tech tips note that vehicles with single exhaust, the appearance panel which covers driver's side frame rail must be removed. This is a Class I rated hitch that is rated for towing up to 2,000 pounds gross towing weight and 200 tongue weight, and is compatible with Class I 1-1/4 accessories only. Since it is Class I hitch, the manufacturers recommended...
    view full answer...
  • Recommendations for Bike Wing Carrier and 2009 Hyundai Sonata Trailer Hitch
    For your 2009 Hyundai Sonata, the Curt Trailer Hitch Receiver # C11325 is 5-1/2 inch recessed to the hitch pin hole from the outer bumper as you stated. This hitch does require the Curt Trailer Hitch Support Strap - Bike Rack Strap with Cambuckle # 18050 to preserve the warranty on the hitch. Because clearance is a concern, I recommend the Draw-Tite # 24757 which does not require the strap and also is only 5 inches recessed to the center of the hitch pin hole to give you an additional...
    view full answer...
  • Does the Exhaust have to be lowered to Install a Trailer Hitch on a 2009 Hyundai Sonata
    Installation on a 2009 Hyundai Sonata with single exhaust is going to be nearly identical as in the video showing installation of Draw-Tite Trailer Hitch, # 24757, on a 2010 model. The two different years are part of the same generation and the hitch attaches the same way in both models. This is quite possibly the easiest installation I have seen for a hitch. Even the instructions, which I have linked for you, have just 2 steps. Neither our installers nor the hitch manufacturer mention...
    view full answer...
  • Recommended Trailer Hitch for 2007 Hyundai Tucson
    I do have a solution for you, however the Draw-Tite Sportframe Trailer Hitch Receiver # 24757 referenced in your question is designed for certain model years of the Hyundai Sonata and is not compatible with your 2007 Hyundai Tucson. For your Hyundai Tucson, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75561. This is custom-fit for your vehicle and will provide a nice 2 inch receiver opening and a 3,500 pound towing weight capacity. No drilling will be required during...
    view full answer...
  • Will the Draw-Tite Hitch # 24757 Fit on a 2010 Hyundai Sonata SE, with Dual Exhaust.
    Yes, the Draw-Tite Sportframe Class I Trailer Hitch, item # 24757, will fit on your 2010 Hyundai Sonata SE, with dual exhaust. The under body appearance panel noted in the instructions, is only present on single exhaust models and needs to be removed for hitch installation, dual exhaust models do not have this panel and the hitch installs without removal of any parts. To complete your Class I Towing setup you may also want to consider the following items. Custom Fit Vehicle Wiring # 118433 Ball...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Rick A
Test Fit:
Rick A
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<