Trailer Hitch and Bike Rack Recommendations for a 2009 Hyundai Sonata
Published 11/20/2013 >
Products Featured in This Question
Question:
Hi! Im very new to car installations in general and had a few questions regarding your trailer hitch part. I wish to install a bike rack on my car, so I would need to order this part, as well as the drawbar, pin and clip, such as part 3592, as well as the actual bike rack, correct? Also, will this trailer hitch part also fit both the 4cyl version and the V6? Thank you for your time and help.
asked by: HMLai
Expert Reply:
The Draw-Tite trailer hitch # 24757 fits all models of the 2009 Hyundai Sonata. To use this hitch with a bike rack, you will not need the ball mount, pin, or clip. You just need the hitch and a compatible bike rack. I have included a link to a video showing a typical installation for you.
This is a Class I trailer hitch so you have to use a bike rack that is Class I compatible and you will be limited to carrying 2 bikes at most. The reason is because the weight of additional bikes will be too far from the receiver and will produce too much torque on the hitch. This can damage the hitch and vehicle.
For a compatible bike rack I recommend the Swagman Trailhead, # S63360. It is Class I compatible, can tilt down, has anti-sway cradles, and the rise in the shank provides better ground clearance. The hitch pin is included. I have linked a video review of this rack for you.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical mens bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wifes bike would be at a severe angle and I would not be able to load my sons bike at all. I have included a link to a video showing how the adapter works.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch and Vehicle Wiring Recommendation for a Single Exhaust 4-cylinder 2006 Hyundai Sonata
- Q&A: What Do I Need to Tow a Motorcycle Trailer with a 2007 Hyundai Sonata
- Q&A: Can I Use A Hitch Expander With My 2009 Hyundai Sonata 1 1/4 Hitch Receiver
- Q&A: Ball Mount that Fits 1-1/4 inch Hitch with 1-7/8 inch Hitch Ball
- Q&A: Diameter of Hitch Ball Mounting Hole on Reese Trailer Hitch Starter Ball Mount Kit RP7043000
- Q&A: Hauling Scooter With 1-1/4 Hitch Receiver
- Q&A: Torque Needed For Nut of Reese Trailer Hitch Starter Ball Mount Kit # RP7043000




