Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Torx flathead screw makes securing a wood floor to your trailer quick, easy, and economical. Screw has a 1/4" diameter and Type F point for heavy-gauge sheet metal. Specially designed for use on Alkaline Copper Quaternary wood.
Features:
Note: Requires 7/32" pilot hole.
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this 1 1/2 inch long Torx trailer floor and wall liner screw for the ACQ treated wood. Now, these Torx flathead screws will make securing the wood floor to your trailer very quick, easy and economical. The screw itself has a type F point to it which is designed for securing your wood floor to heavy gauge sheet metal. Now, this screw is designed specifically for the ACQ treated wood which stands for alkaline copper quaternary wood.
Because this ACQ treated wood is very corrosive, these screws have been made with an approved plating material that's less expensive than stainless steel screws and have been shown to outperform galvanized screws. If you notice it has the tapered flathead to it which will sit flush to the surface when they're installed. The Torx head size on this is a T30. The diameter of the screw is a quarter inch in diameter. And the length we mentioned is 1 1/2 inches long.
As I mentioned earlier, this is a type F point and what that is, it's a very blunt tip. And if you rotate it, you can see that it has multiple cutting surfaces on it. Now, when you do install this it does require first a 7/32 inch diameter pilot hole to be drilled first and then the screw installed into that. But that should do it for the review on the 1 1/2 inch long Torx trailer, floor and wall liner screw for the ACQ treated wood..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Bob P.
5/26/2016
They have held up well. I had to remove 4 center boards and they came out well and I was able to reuse them-a good product.

Matt N.
4/25/2016
After a year they still look great. Very satisfied.

Mark S.
12/29/2017
Still working great, thanks

Bernard C.
3/23/2018
These deck screws are just as the day I installed them. Great product!

Greg
10/27/2017
Thanks for the follow up email, the product is working awesome, they were as advertised and they were a breeze to put in. I would recommend to new users of the screws to drill a pilot hole first, it just makes installation a lot easier. On change addition....I would like to see different lengths of this type of screw offered on your website.As always you guys rock!

Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Bryan H.
9/21/2015
I year later and still holding up great!