Leaves, brush, and small branches collect around your property, and gravel drives need smoothing. Pull this landscape rake behind your ATV or UTV to handle both jobs. Requires a Black Boar manual or electric implement lift (sold separately).
Leaves, grass, brush, and small branches collect along trails and around your property. Loose gravel can also leave your driveway or work area uneven. Pull this landscape rake behind your ATV or UTV to gather debris, spread gravel, and smooth the surface without doing it all by hand.
Two rake sections give you 20 curved steel tines, with 10 on each side of the lift. Each tine bolts on separately, so you can remove individual tines and change their spacing for the debris you're clearing. The tines rake loose material and smooth worked ground rather than digging deeply into packed soil.
This landscape rake attaches to the Black Boar manual implement lift (CAM82PC - sold separately) or the electric implement lift (CAM95PC - sold separately), not directly to your ATV or UTV hitch. The included U-bolts and hardware fasten one rake section to each side of the lift's crossbar. Raise the rake off the ground to move between work areas, then lower it to rake debris or level gravel. The lift holds the rake at its working angle as it lowers.
To assemble either lift, you'll need a 3/4" wrench, a 3/4" socket (PTW38524 - sold separately), and a torque wrench (PT87ZR - sold separately) capable of 70 ft-lbs. The manual lift also requires a grease gun (L30-310 - sold separately) with moly lithium grease (LM54FR - sold separately). For the electric lift, you'll need a wrench or socket that fits your ATV or UTV battery terminals to connect the included wiring harness.
The extra weight of a lift and implement can make the back of your ATV sag. The Black Boar suspension lock (CAM85PC - sold separately) supports the rear suspension to limit sag during implement work.
The landscape rake is one of several Black Boar implements that work with the same lift. For more involved driveway work, switch to the scrape blade (CAM25PC - sold separately) to grade and smooth loosened material. For a garden or food plot, the disc harrow (CAM45PC - sold separately) breaks up clods and works topsoil, and the chisel plow (CAM75PC - sold separately) loosens packed ground with individual teeth. The plugger (CAM92PC - sold separately) pulls small cores from the ground to aerate soil, and the cultipacker (CAM42PC - sold separately) breaks up remaining clods and firms a prepared seedbed. Add the implements that match the work around your property without buying another lift for each job.
Ratings & Reviews
Do you have a question about this ATV Attachment?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.