bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. 4 Flat
  4. Trailer Hitch Wiring
  5. No Tow Package
  6. Vehicle End Connector
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Tekonsha

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

$50.70
Retail:$62.18
You Save: 18%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118472 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (285)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring

  • 4 Flat
  • Trailer Hitch Wiring
  • No Tow Package
  • Vehicle End Connector
  • Tekonsha
  • Plug-In
  • No Converter
  • Plug and Lead
  • Visible

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118472 Tow Ready T-1 T-Connector - 4 Wire

Item # 118472

Installation Details 118472 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

285 reviews
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

by:
2012 Ford Flex

super easy



by:

Awesome way to show how things are done. Great job guys.



by:

The product was delived promptly and courteously. Great service.



by:

Great product, easy to install, delivery was quick and package well.



by:

Easy to install,prompt shipping and works great.



by:

Easy install with not special tools. Mounts under the car, not inside. Very pleased



by:
2012 Ford Flex

Product arrived sooner than expected, installed exactly as indicated in the directions, and works perfectly.



by:
2012 Ford Flex

Very easy to install. My 12 year old son acually installed the wiring package. On line video was also very informative.



by:
Ford Flex

Ordered new hitch for my Ford Flex, it came in 4 days and was easy to install took less than one hour including the harness.

Thank you for the great service.



by:
2011 Ford Flex

This product is well made. The fit was excellent. The only change I would make is in the wire ties that were included to attach the wiring to car. There's really no way to use them. Would have been better to supply some kind of clip to hold wire and clip to bottom of flange along back of car. Otherwise I would recommend this product.



by:
2011 Ford Flex

I professionally installed this trailer wire on my Ford Flex 2011. It corrupted my wiring system in 2 weeks. It made my running lights on my Flex to not work at all. Secondly, this product is after market which voids your warranty. The only wiring that the Flex can handle is from the front fuse box. I learned the hard way and had to have this wiring removed from my Flex which cost me an additional $68 dollars. I strongly suggest not using this product and have Ford install your trailor light wiring since it will not void your warranty.



by:
Ford Flex

I could not be more pleased with your company. I could have bought the wiring harness from several vendors, but you guys stepped up and did the job. The harness was for my daughters Flex and she is delighted. We try to keep a smallloopof vendors here and you can be assured, you are in the loop.



by:
2011 Ford Flex

Product arrived quickly, installed just as the instructions stated. Looks good. It would be nice if the hitch had a bracket for the wiring harness to attach to. So far no complaints at all.



by:
Ford Flex

Used this while installing the factory hitch on my Flex. Simple to install, instructions were clear and easy to understand. This wiring tees into the wiring for the taillights. This solution is plug and play- no soldering, etc., required.



by:

Great product for the job it intended for! I highly appreciate it! Thanks



by:

This wiring harness make the job very easy. Take out the light housing, plug them into the plug and put the light housing back in.



by:

All items came rather quicker than I expected, well packaged. It's hard to damage the steel trailer hitch of this size. NO problems were encountered on the installation.



by:
2019 Ford Flex

Very satisfied with the finished product! Having said that I’m extremely disappointed in the condition of the box it arrived in and scratches in the paint. The wiring harness was apparently in a box at one time but when I opened the big box the harness and instructions were laying loose in the bottom of the box and I’m lucky to have recoverd all the parts as there was a 6”x4” hole in one corner of the box. The hardware bag also had a hole in it and washers fell out when I touched the bag. So yes 5 stars for the product but 0 stars for packaging and shipping.



by:

Installation could only have been easier if someone else did it. Instructions were easy to understand and kit had everything needed.



by:
2012 Ford Flex

Photos of our T-one wiring harness install this afternoon on our 2012 Ford Flex. Should be comprehensive, but I have a few other photos.

I ziptied to the factory harness where I could, and had to clip the last one of your zipties to get enough slack. Ground wire unzipped a little. Drilled & Dremel'd off the finish, then used "Noalox" between the ring terminal & body, then sealed with caulk. I will add some split-loom later where the trailer plug wiring goes into the backside of the tow bumper. I added electrical tape to the green wire (not shown in photos), and any other place I thought might rub. 4-pin connector just wedged into the factory slot.



by:

A great company to deal with !!!!



by:

Installation was straight forward and not overly complicated. The hitch itself is very beefy indeed. The plug-n-play wiring for the lights was very simple as well



by:
2011 Ford Flex

The easiest wire kit to install. Had my 7 year son hook it up for me.
Thanks again. Will order next hitch and wire harness, will tell friends and family about them.



by:
2016 Ford Flex

Overall good product, work as intended. Only thing I would change is the ground eyelet. Im not drilling into tge body of my car for a rust area later in it's life. I added a larger eyelet and put the ground on the hitch mount bolt.



by:
Ford Flex

Fit my Ford Flex perfectly. No issues at all.


25
285
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Trailer Hitch Recommendation for 2016 Ford Flex with Dual Exhaust
    Hey Gustavo, we have the etrailer hitch part # e52AR that is a confirmed fit for your 2016 Ford Flex with dual exhaust. This would be a really great option for carrying a bike rack or towing a trailer. For trailer wiring you'd then want the Tekonsha part # 118472 which installs easily. Both of these do not require modifications to the vehicle. Do you have a bike rack already?
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Ford Flex SEL without Ecoboost
    For a 2012 Ford Flex without Ecoboost the correct Curt hitch is # 1355 or the etrailer hitch # e95KR. These hitches are very similar and either would be a great choice. The most popular choice is the Curt # 13551. I would recommend going with the one that costs the least. Curt hitch # C13110 that you referenced is designed to fit the following models: 2009 - 2018 Ford Flex with Dual Exhaust 2010 - 2017 Lincoln MKT with EcoBoost If you plan on doing some towing, I recommend the etrailer...
    view full answer...
    Image 1 for
  • Brake Controller Wiring Harness to Install Reese Towpower 8508211 in 2019 Ford Flex
    The Reese Towpower 8508211 is like the Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90885 that we offer. For a 2019 Ford Flex with the factory tow package, you'd want to use the # 22292 brake controller wiring harness which would plug into the connector clipped to the back of the storage pocket located just to the right of the steering column as shown in the provided photo. The connector will only be there if the vehicle is equipped with the factory tow...
    view full answer...
    Image 1 for
  • Recommended Parts Needed to Tow with a 2019 Ford Flex
    The trailer hitch that I recommend using to tow a small trailer with your 2019 Ford Flex is the Draw-Tite Max-Frame # 75679 which is a confirmed fit for your vehicle. Then for wiring I recommend the Tekonsha T-One # 118472 because it has the highest amp draw rating out of the available options. This means that if you end up towing a trailer with a fair amount of lights on it you won't overdraw this wiring harness. If you would like to mount this near the receiver then you can use the mounting...
    view full answer...
    Image 1 for
  • 7-Way and Brake Controller Recommendation for a 2012 Ford Flex
    Since you do not have a factory trailer wiring you will need to start with a 4-way (if you do not have one). For that you would want the # 118472. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller...
    view full answer...
  • Does Tekonsha Trailer Wiring for 2019 Ford Flex Have Capacity to Power LED Trailer Wiring
    Yes, the taillight circuits of your 2019 Ford Flex will handle the amperage draw of the trailer LED taillights you have after you install the # 118472. We do have the Curt version part # C56343 which actually draws power for the trailer taillights from the vehicle battery as an option as well. If your trailer had incandescent bulbs or you wanted to be extra cautious in general this would be the way to go.
    view full answer...
  • Recommended Weight Distribution System for 2014 Ford Flex Towing a 3,200 Pound Camper Trailer
    I suggest a weight distribution system that has sway control. To choose the correct system you'll need the tongue weight of your loaded and ready to tow trailer added to the amount of gear in the Ford Flex behind its rear axle. A trailer's tongue weight should fall within about 10 to 15 percent of its total weight. The best way to determine your trailer's tongue weight is to use a scale # e99044. Since your trailer is 3,200 pounds empty and it's presumable that you will be adding to...
    view full answer...
  • 2 inch Trailer Hitch Recommendation for 2013 Ford Flex with Dual Exhaust
    For your 2013 Ford Flex with dual exhaust the Draw Tite hitch part # 75679 is a confirmed fit and has a 2 inch opening like what you need. It has a 4,000 lb towing capacity which is the highest towing capacity option we have. I attached an install video for this hitch for you to check out as well. For trailer wiring you'd then want the part # 118472 which is also a confirmed fit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
    view full answer...
  • Recommendations for Hitch and Towing Setup on 2018 Ford Flex
    Hello, yes will be glad to provide you with options for a complete solution to using your 2018 Ford Flex for towing a 2019 Coachmen Clipper 17RD. For a trailer hitch, I definitely would go with the Class III etrailer trailer Hitch Receiver, # e52AR if you have dual exhaust and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e95KR without dual exhaust. These are rated for use with a Weight Distribution System (WDS) which I advise using. These hitches...
    view full answer...
  • Trailer Hitch and Wiring for a 2012 Ford Flex with Ecoboost
    For Draw-Tite trailer hitch # 75679 it will fit a 2012 Ford Flex with or without the Ecoboost engine. The installation instructions, which I have linked for you, are the same for either configuration. Since the Ecoboost models have dual exhaust, the sections in the instructions that deal with lowering the exhaust will apply to both sides. I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For wiring use...
    view full answer...
  • Towing Capacity and Trailer Hitch Recommendation 2010 Ford Flex for Towing 2,000 lb Boat Trailer
    I looked up the towing capacity of your 2010 Ford Flex and it has a capacity of 4,500 lbs total trailer weight which means you'd pretty easily be able to tow a 2,000 lb boat and trailer. You'll need a few things to do this safely. First is a hitch like the Draw Tite part # 75679 that you referenced. This has a 2 inch opening which means it will have plenty of capacity and is also the size that is most popular with hitch accessories. I attached an install video for this for you to check...
    view full answer...
    Image 1 for
  • Brake Controller Install 2010 Ford Flex
    According to my buddy at Tekonsha, all models of the 2010 Flex are equipped with the brake controller connector. It's located right behind the front edge of the dash, directly below the steering column. You'll need the # 3035-P Brake Controller Wiring Adapter. If your Flex has the factory installed 7-way trailer connector at the rear, you'll have a plug and play installation. The procedure will be different if you have the 4-pole or if you have no trailer connector. If you have the 4-pole,...
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring for 2014 Ford Flex With Dual Exhaust
    For your 2014 Ford Flex with dual exhaust I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75679. This is a custom-fit Class III hitch with a 2" receiver. It features a bolt-on installation along with an e-coat base and a powder coat finish for rust protection. This hitch also comes with a limited lifetime warranty. For wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118472. This plugs into existing wiring and will provide you with a 4-way connection to power...
    view full answer...
  • Will The Curt Hitch Cargo Carrier # e98874 Fit My 2010 Ford Flex
    To determine if the etrailer Hitch Cargo Carrier # e98874, will fold up on your 2010 Ford Flex, you will need to take a measurement. Measure from the center of the hitch pin hole on your hitch out to the farthest point of your rear bumper. If this measurement is less than 9-1/2 inches, the Hitch Cargo Carrier will fold up when mounted to you Ford Flex. There is not a recommended light kit available for the etrailer Carrier. It has reflectors. Neither Reflectors nor lights are required....
    view full answer...
  • Least Visible Trailer Hitch and Wiring for a 2012 Ford Flex Limited EcoBoost Dual Exhaust
    Both of the trailer hitches available for your 2012 Ford Flex with dual exhaust have the same design and install in the same places on the vehicle so they will all look pretty much the same. The cross tube will be visible beneath the rear bumper but is recessed enough to not be glaring. The most popular option is the etrailer trailer hitch # e52AR but Curt hitch # C13110 will work just as well. I would go with whichever costs less. I have included links to videos showing installations...
    view full answer...
  • Recommended 7-Way Connector for a 2010 Ford Flex With OEM Class-III Trailer Hitch and No Wiring
    The wiring harness you need is the 4-pole flat # 118472 since there isn't one on your 2010 Ford Flex. You will also need a wiring kit # ETBC7. This kit includes everything you need to install an electric trailer brake controller and 7-way connector. One of our most popular brake controllers is the Prodigy P2 # 90885. It includes digital display, 3 boost levels, battery protection and continuous diagnostics. It is also transferable to additional vehicles. I highly recommend using dielectric...
    view full answer...
  • 4-Pole Trailer Connector Mounting Options for 2009 Ford Flex
    The Draw-Tite # 75679 would be great choice. For the trailer wiring harness, I'd recommend the # 118472 T-1 connector. I have two suggestions for how to attach the 4-pole connector to the vehicle. You'll need a long no-drill bracket, part # C57202, as well as the # 18144 mounting bracket. The 4-pole will push into the mounting bracket from behind. Your other option would be to use the same # 18136 bracket, along with the # RM-910030-5 bracket. You'd then use a # HM47605 knockout adapter....
    view full answer...
    Image 1 for
  • Trailer Wiring Harness for a 2014 Ford Flex without Factory Tow Package
    Tow Ready trailer wiring harness # 118472 is just one option for the 2014 Ford Flex. Its the only option that does not have a powered converter like you are describing (for models without factory tow package). There could potentially be too much power draw if you were to use this harness. Since that is a major concern for you I recommend using Curt harness # C56343 instead. It does require a direct connection to the vehicle battery. I have included a link to our help article with tips...
    view full answer...
  • Is a Powered Converter Needed to Add Trailer Wiring for a 2011 Ford Flex SEL
    If your 2011 Ford Flex SEL did not come with a factory installed 7-Way trailer connector then you can either use the T-connector without the converter, # 118472, or you could use one with a powered converter, # C56343. Either harness will work. The benefit of having the powered converter is that it gets power for the trailer lights from the vehicle battery, not through the tail light wiring. This adds another level of circuit protection. Whenever there is a powered converter available for...
    view full answer...
  • Recommended Trailer Hitch for Towing with a 2015 Ford Flex
    I recommend going with the Draw-Tite # 75679. This will give you a Class III trailer hitch with a 2" receiver for your 2015 Ford Flex. I like this trailer hitch because it has been rated as a 4 out of 10 for installation difficulty and it will fit whether you have dual exhaust or not. You will also need wiring like the T-One # 118472 which gives you the basic lighting functions for your trailer and a ball mount/hitch ball/pin & clip combination like the popular # C45036. This comes with...
    view full answer...
  • 7-Way Connector Recommendation For 2010 Ford Flex To Use With Brake Controller
    The parts you referenced, the Tekonsha Prodigy P2 Brake Controller, part # 90885, and the Tekonsha Plug-In Wiring Adapter, part # 3035-P, are designed to fit your 2010 Ford Flex if you have a 7-way connector already installed. If you do not have the 7-way on your Flex, I can make some recommendations based on what you currently have. If you have a 4-way connector on your Flex, you can use the Hopkins Adapter 4 Pole to 7 Pole and 4 Pole, part # 37185. This will plug into the vehicle 4-way...
    view full answer...
  • Recommendation on a Hitch, Wiring Harness, Transmission and Oil Cooler for a 2011 Ford Flex
    I have a hitch that will work on your 2011 Ford Flex with single exhaust. The Draw-Tite Max Frame Class III Hitch, # 75679, is a custom-fit trailer hitch that is designed for the 2011 Ford Flex. The hitch has a 400 lbs tongue weight capacity and a 4000 lbs gross trailer weight capacity. I recommend this hitch over the Curt hitch, # 13551, because the Draw-Tite hitch has an easier installation than the Curt hitch on the 2011 Ford Flex. The Draw-Tite hitch uses a no drill installation that...
    view full answer...
  • Parts Needed to Install a Hopkins Trailer Brake Controller on a 2011 Ford Flex
    Brake controllers are not vehicle specific so you can install the Hopkins Agility brake controller # HM47294 on your 2011 Ford Flex. If your Flex did not come with any sort of trailer connector, you will start by installing a 4-Way # 118472. If it already has a 4-Way you will not need to install one. Once the 4-Way is installed you will need to install the 4 and 7-Way installation kit # ETBC7 which includes a 7-Way and the wiring/accessories needed to hardwire in a brake controller. I...
    view full answer...


< Previous




Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Shane T
Test Fit:
Shane T
Employee Shane H
Test Fit:
Shane H
Employee Ryan G
Test Fit:
Ryan G
Employee Ian F
Test Fit:
Ian F
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Andrew K
Video by:
Andrew K
Employee Joshua U
Video by:
Joshua U
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<