See what our Experts say about this Draw-Tite Custom Fit Vehicle Wiring

• Recommended Extra Long Ball Mount For 2001 Ram 3500 With 11.5 Lance Camper
  For your 2001 Ram 3500 Dually 4x4 with Lance 11.5 camper, I recommend the Brophy Ball Mount # BM20. This extra long ball mount will allow you to put the hitch ball center 13-1/4 inches from the center of the hitch pin hole on your trailer hitch receiver. This is rated for 10,000 lbs. I recommend the # 63845 for a 2 inch hitch ball or # 19260 for a 1-7/8 inch ball. If you need more length than the extra long ball mount, you may consider the Curt Extender for 2" Receivers -18" Long #...
  view full answer...
• Will Reese Titan Hitch Extender Work with 2017 Chevy Silverado 2500 with Factory 2-1/2 Inch Receiver
  For your 2017 Chevy Silverado 2500 with factory 2-1/2 inch receiver, the Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long # RP45292 will work great for you without any weight distribution needed. You may want to add a wiring extension like the 7-Way Connector 7' Loop # 20027 which can be shortened for your application or the TorkLift Wiring Harness Extension for 36" SuperTruss Hitch Extender - 7-Way RV # TLW6036 which already fits. You may also want to...
  view full answer...
• Best Wiring Options for Towing a 5th Wheel Trailer
  You have a few options when it comes to 5th wheel wiring for your truck. Most trucks come with factory 7-way trailer connectors at the bumper. If your truck has a factory 7-way, then I recommend installing a 5th wheel wiring harness like the Hopkins Endurance 5th Wheel Harness, # 41157. In-bed harnesses provide a quick and easy connection point in the bed, so you don't have to modify the existing trailer harness to make it longer or use an extension. This harness has a 90-degree plug,...
  view full answer...
• Hole Size on Reese Underbed 5th Wheel Install Kit Pucks and 5th Wheel Trailer Wiring 2010 Ford F-250
  When installing the underbed 5th wheel installation kit # RP30073 the holes for the pucks need to be 2-1/2 inches as indicated in the instructions that I have linked for you. You will need a 2-1/2 inch hole saw to make the cuts. If your 2010 Ford F-250 came with a factory 7-Way trailer connector at the back, you can use gooseneck/fifth wheel wiring harness # 50-97-410, and it will just plug in line with the factory wiring. The wiring harness is 9 feet long so you can install it ahead or...
  view full answer...
• Extension For 7-way Plug On Trailer To Allow 7-Way Bumper Connection Use
  The Curt 5th Wheel/Gooseneck Wiring Harness 7-Pole item # C56000 allows you to use your bumper 7-way and also adds a second 7-way in your truck bed for convenience. This gives you two working 7-way connections. If you want to connect your 5th wheel or gooseneck trailer to your rear bumper connection, you can use the 7-Way Connector 7' Loop # 20027 for the non-permanent wire extension.
  view full answer...
• Adding a 7-Way Trailer Connector to a 2012 Dodge Ram 2500 Big Horn With Flatbed
  If your 2012 Dodge Ram 2500 came with a factory tow package that included a 7-Way at the back of the vehicle, you can use 5th wheel and gooseneck in-bed wiring harness, # 50-97-410. This harness plugs in line with the factory wiring harness under the truck and provides a 7-Way in the bed area. If the truck did not come with a factory tow package that included a trailer connector, you will have to hardwire one in starting with a 4-Way using # 119178KIT. A T-connector is not available. Once...
  view full answer...
• Recommended Wiring Harness for Towing 5th-Wheel Trailer Behind 2012 Ford F-250
  I think you may be looking for something like the Draw-Tite 7-Way Connector 7 Ft Loop # 20027. This extension will allow you to run the harness under the tailgate like you mentioned in your question. However, I do not recommend doing this as running the wires under the tailgate will leave them exposed and possibly lead to them being damaged. I instead recommend using the Pollak 5th Wheel/Gooseneck T-Connector with 7-Pole # PK11893-11932. This socket will plug into the OEM harness and...
  view full answer...
• Availability of a 7-Way 5th Wheel Trailer Connector for a 2005 Toyota Tundra
  For the 2005 Toyota Tundra with factory installed 7-Way trailer connector, a custom fit 5th wheel/gooseneck truck bed wiring harness that plugs in line with the factory wiring is not available. but there are options. If your existing connector does not have the round connector plugged into the back, you will need to splice in a harness like the 7-Way Pre-Wired Connector, item # 20023, see video link. Another option would be to use an extension like the 7-Way Connector 7 foot Loop, item...
  view full answer...
• Inexpensive 7-Way Extension Harness Recommendation
  The part # 20027 is a 7-way extension that is 7 feet long and costs a bit less than the part # TLW6021 that you referenced.
  view full answer...
• 7-Way Recommendation for Bed of 1995 Ford F-250 for Connecting to Camper 7-Way
  If the 7-way at the rear of your truck has round connectors like in the picture that I attached you could use the # 41157 as an easy way to splice in a 7-way that you could then mount near the wheel well of your truck bed for the camper of your truck to use. If not, you could use the part # 20027 to plug into your current 7-way and then route it up to where you need it.
  view full answer...
  
• Will 7 Pole Trailer Connector Loop # 20027 Provide In Bed Trailer Connection on a 2002 Ford F-250
  As long as your 2001 Ford F-250 has a working 7-Way RV connector at the rear bumper, the 7 Pole Trailer Connector Loop, # 20027, will work as an in bed connector when towing a fifth-wheel or gooseneck trailer. If your truck has the factory 7-Way connector, similar to the round one shown in the photo I attached, you can use the custom fit gooseneck wiring, # C56000, to install a 7-Way connector in the bed or your truck. This wiring harness will plug inline with the OEM connector at the...
  view full answer...
  
• 5th Wheel 7-Way Recommendation for a 2011 Ford F250 Super Duty
  You would want the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 41157 to install a 7-way in the bed of your 2011 Ford F250 Super Duty for your 5th wheel trailer. I attached an install video for this product for you to check out also.
  view full answer...
• 7-Way to 7-Way Trailer Wiring Extender
  The Bargman extension 50-67-210 has trailer ends on both sides so it would not work. What you would need is an extension that has a trailer end on one side and a vehicle end on the other side such as # 20027. I have linked a video review of this part for you.
  view full answer...
• Availability of an Adapter to Use the Titan Hitch Extender # RP45292 with a 2 Inch Hitch
  I cannot recommend either of the situations that you mentioned for safety reasons. If you were to make a reducer for the Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, 24-34 inches, item # RP45292, it would lower the weight carrying capacity of the hitch and the extension and could cause an unsafe towing condition. A solid steel bar while it seems very sturdy would most likely have less weight carrying capacity than a square tube extension like the Titan extension. The best...
  view full answer...
• Availability of 7-Way to 7-Way Extension Non-Coiled
  What you would need is an extension that has a trailer end on one side and a vehicle end on the other side such as # 20027. This is 7 feet long. I attached a review video as well.
  view full answer...
• 7 Foot 7-Way Extension Recommendation
  I believe the closest thing to what you want would be the 7-Way Connector Loop # 20027. This product is 7 feet long and would act as an extension for your 7-way connectors. Although it is longer than you said you needed you could loop up the excess and run a zip-tie around it to give you the right length.
  view full answer...
• 5th Wheel/Gooseneck Trailer Wiring Harness for a 1997 Ford F-250 Heavy Duty
  Gooseneck/5th Wheel Trailer wiring harness # 40167 fits 2002 - 2004 Ford F-250 and F-350 Super Dutys with factory 7-way connectors. It will not fit a 1997 Ford F-250 heavy duty. There are currently no in-line harnesses that will fit. But what you can use is # 20027 or # C56080. Either of these will plug into the existing 7-Way and the long cable allow you to put the 7-Way in the truck bed. These harness just do not plug in line at the backs of the 7-Way like the other harnesses.
  view full answer...
• Availability of an RV Style 7-Way to 7-Way Extension
  If you want to use # WG54006-043 then you just need the vehicle end, such as # PK12-707E, since it already has the trailer end on it. We have some ready-made 7-Way extensions that you can use such as # 20027 or # C56080 which are 7 feet long. We have a shorter option, # TLW6021, which is 21 inches long. And we have a 10 foot long model # TLW6510.
  view full answer...
  
• Does Pollak 5thWheel/Gooseneck T-Connector 7-Way Plug into the 7-Way on the Truck
  This product connects in line with the 7-Way that is on your vehicle from behind the bumper. The wire is run inside the bed walls and down underneath the truck where it connects, and stays with the truck, so you do not have to hunt it down each time you hookup the gooseneck trailer. We have a video of a similar product, part # C56000 from Curt being installed on a 2008 Chevy Silverado 3500. It attaches the same way as the Pollak PK11893-11932 that you were looking at. I have included a...
  view full answer...
• 7-Way Recommendation Extension for Towing Camper that Wants to Unplug 7-Way
  To extend your 7-way the part # 20027 would give you 7 additional feet of 7-way wiring. Since you said camper I am thinking you may have a fifth wheel camper and are using the 7-way at the bumper of the truck. If that is the case your best solution would actually be the part # 41157. This installs inline with the 7-way at the rear of the truck and then allows you to install a second 7-way up in the bed of truck.
  view full answer...
• Availability of 7-Way Extension for Trailer Towed By 2015 Toyota 4Runner
  The most cost effective solution to the problem you're experiencing would be to use the Draw-Tite 7-way loop, part # 20027. There is a 24 inch option, part # TLW6021, but it costs twice as much. I'd use the longer 20027 and simply zip tie up the excess wire so it's out of the way. The relocated 7-way could be attached to the trailer hitch using a # C57202 no drill bracket along with a # PK12711U trailer connector bracket. Another option would involve installing a longer trailer connector...
  view full answer...
• What Wiring Harness for Curt C45048 36 Inch Hitch Extender
  I'd use a 7-way connector loop like # 20027 as the easiest option that wouldn't require cutting and splicing. At 7 feet, it's longer than you'd need but you can wrap the excess around the extender which will help keep everything secure. One end of the loop would connect to the 7-way in the vehicle, and the other end will attach to the bracket affixed to the # C45048 extender.
  view full answer...
• Is There a Fifth Wheel Install Kit Available for a 2010 Dodge Ram 3500 6 Foot Bed
  Yes there are fifth wheel bracket kits available for your 2010 Ram 3500. You would use Curt kit, part # C16420-204. This kit includes the brackets that bolt to the frame and the rails that sit in the bed and attach to the frame brackets. I have included a link to the instructions so you can see how the kit installs. You may also be interested in wiring, to attach your trailer wiring in the bed of your truck. The 5th Wheel and Gooseneck 90-Degree Wiring Harness with 7-Pole Connector, part...
  view full answer...
• Options for 7-Way Extension for Tow Vehicle with Recessed 7-Way
  You didn't say how long of an adapter you needed, but the part # C57003 is 9-1/2 inches long. Or for one much longer the part # 20027 is 7 feet long.
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?