Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a real quick look at this Curt T-Connector Vehicle Wiring Harness with four pole flat trailer connector. Now this harness has been designed to fit your 2012 to 2017 Hyundai Accent Sedan. On custom fit parts such as this harness, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your vehicle and our fit guide will confirm if this will work for you or if we have another harness that will work for you. Now this harness is going to give you a four pole flat trailer connector at the back of your Accent to power your trailer signal lights.
This is also going to be compatible with five, six, and seven pole adapters. Those adapters are sold separately and as you notice here, a dust cap is also included to cover up those connection points when the plug is not in use. And if you notice here, this black box, this is a taillight converter that's built into this T-connector vehicle wiring harness. Now because most trailers run on a two wire system where the brake and turn signals are carried on one wire, the separate brake and turn signals from your vehicle's three way, three wire system need to be combined so they are compatible with the wiring system of your trailer. This converter box is going to combine the brake and turn signal functions of your automobile so that they can run on one wire to properly activate your trailer's taillights.
Now this will not affect how your taillights on your vehicle operate. By the way, Curt built each taillight converter using surface mount technology, giving you consistent, reliable performance. This is going to minimize trailer light yield and intensity while producing minimal heat and it's going to ensure superior operation even in rough road conditions. This harness is designed to connect quickly and easily. These custom fit T-connectors are going to plug into your Accent's vehicle wiring harness, which is gonna be located behind the driver's side and passenger side interior trim panels in the rear cargo area.
So once you get these plugged in, you will need to mount this converter box to a safe out the way location. You could do that with double-sided adhesive tape that's included with this kit or maybe one of the many cable ties that's also included with this kit. And then speaking of cable ties, you can use those to secure any excess or slack in your wiring. And then once installation is complete, this four way connector can be stowed in an out of the way location within your cargo area. Now instructions are also included to guide you through the installation process.
You will get a self-tapping screw there. So you can ground your ground wire securely here. And this ground wire is the white wire with the ring terminal attached to it. One other recommendation that I wanted to make is, it is recommended that you use a small amount of dielectric grease on all of your electrical connections, like the plugs on the vehicle and the four pole flat connector itself. That grease is designed to help prevent electrical failures caused by corrosion and moisture. So if you're interested in taking a look at that grease, on your screen, I do have our part number there. You can just take that part number, pop it into the search field of our website. That will take you to that grease and you can add that to your order. Well, I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
So incredibly quick and easy to install on my 2016 Accent (hauling bicycles for my shop).
Awesome this is the 3rd hitch that I have bought from here. This was a super easy install with the wire and tools that were sent with the hitch. I installed the hitch and the wiring harnes in less than an hour in my driveway on a cold winter day. I love the product.
I am very happy with my hitch and wiring harness. installation was a breeze. great products at a great price. thank you etrailer.com
its a well made wiring harness....and makes hookups fast and easy...it;s over a year now and i have not had any problems....I would reccomend this wiring harness....
Very easy to install. Instructions are great. No sense splicing wires with options like this available. Highly recommended, no worries about loose connections or bad splices/exposure to weather.
Works great! ...just snaps together in about 3 minutes! NOTE: If you are driving a late model car, you NEED one of these kits for the lights to work correctly!
Excellent products and price. Extremely responsive Customer Service Dept. I highly recommend you try them.
The order was ship as says arrived on time and look like it will do the job will tell more when hook up will by from this seller again and thank you
works good after i had to cut plugs off and wire it direct
Fits perfectly, very easy to install. Good product.
perfect fit , exceelent product
Very happy
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.