Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $117.80
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $117.80
You Save: $53.61
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Chad07/26/2023
Works perfect for what I needed
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Howard 08/12/2022
WOW - MUCH better than attaching my big cab-over camper to the bumper with chains in the back and a welded piece of 2X2 square tubing attached to the frame in the front.
Very easy to install - just had to go get a couple drill bits - no big deal. These tie-downs will be much stronger than any S-hooks or turn-buckles could possibly bend.
I did use threaded connecting links rather than S-hooks - I think they will hold better.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Recommended Stake Pocket Anchors for a 1996 Ford F-250 For your 1996 Ford F-250, I recommend going with the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF. These are universal anchors that will work with your 96 F-250, can be used in any pocket, and measure 5-1/2" tall x 1-7/8" wide x 3/8" thick. These anchors do require drilling so this is going to be a permanent install, however if you'd prefer a non-permanent install the Brophy Clamp On Camper Tie-Downs # HSSF will work just as good.
view full answer... - Camper Tie Downs that Attach to Stake PocketsI have a much better solution for you than the part # EM09085 as a camper tie down. The Brophy Camper Tie Downs, part # TDSF, you have referenced are a universal application. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length. If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and...
view full answer... - Economically Priced Truck Bed Camper Tie-Down RecommendationFor a more economical option we have the Brophy camper tie downs, but they are not frame mounted. They are bed mounted. The Brophy Camper Tie Downs, part # TDSF, are a universal application for full-size trucks and they will fit your Ram 1500. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length. If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down....
view full answer... - Which CR Brophy Truck Bed Camper Tie Downs for a 2019 Chevy Silverado 1500As long as you have at least 2 inches of available width between the inside bulkhead of the bed side and the inside of the inner lip on the top of the bed side (see diagram), the # HSAB is a fit according to CR Brophy. To attach the tie downs to the anchor points on the truck bed camper, you'll also need the # TDHP turnbuckle kit. According to CR Brophy, the # TDSF tie downs wouldn't be compatible. If you click the provided links, you an see product description videos for the tie down...
view full answer...
- Brophy Camper Tie Downs that Fit 2014 Ram 1500Brophy has tie downs that are a fit for your 2014 Ram 1500 with the part # HSAB and # HSBP but the part # TDSF is not a fit for your vehicle.
view full answer... - Determining Fit of Camper Tie Downs for 2012 Ford F-150 Super Crew CabYou can determine which models of camper tie downs will work on your 2012 F-150 Super Crew Cab by using the link provided. At the top of the page is a drop-down menu where you can select your truck's exact configuration to then see compatible products. Bed length comes into play and the presence of running boards will pose an issue. The Brophy Camper Tie-Downs that you referenced, part # TDSF, fit many domestic pickups that are single wall construction with straight fenders. Check your...
view full answer... - Truck Bed Camper Tie-Downs for 2007 2500Chev Crew Classic According to my contact at CR Brophy, the # TDSF stake pocket camper tie down isn't compatible with your truck. The # HSSF clamp style tie down will work as long as your truck bed has two inches of available space under the truck bed sidewall as shown in the provided diagram. You'd also need the hardware package, part # TDHP which includes the chains, turnbuckles and hooks to connect the tie-downs and the camper.
view full answer...
- Camper Tie Down Recommendation for a 2006 Ford F-350 DuallyThe # HSSF should work well as a tie down system for your 2006 Ford F-350. But you may want to check out # TDSF to see which would work better for your application. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where...
view full answer... - Brophy Camper Tie Down Recommendation for a 2015 Ford F-250The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2015 Ford F-250. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Camper Tie Downs for a 1999 Ford F-150Since you will be putting on and taking of a camper shell and camper in your 1999 Ford F-150 I recommend going with custom fit frame mounted tie downs. This will allow you to easily remove the arms of the tie downs, while leaving the frame mounts in place, for when you want to put on the camper shell. These are going to be the best and easiest. They are also more expensive than bed tie downs and you will need to use the following link and drop down menu to select the option closest to your...
view full answer... - Will Brophy Camper Tie Downs # TDSF Fit on 1989 Ford Full-Sized TruckThe Brophy Camper Tie Down # TDSF is a compatible fit for your 1989 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link to the instructions for proper installation. I also recommend the Brophy Camper Tie Down Hardware Package # TDHP for use with the Brophy Tie Downs. They have a capacity of 3000 lbs and I have included a link to the instructions for the proper installation of this product.
view full answer... - Brophy Camper Tie Downs 2006 Toyota TundraThe Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options. For your 2006 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP. Each comes with Neoprene pads to protect your truck's paint. Please see the attached photo with the...
view full answer...
- Camper Tie Down Recommendation for a 2003 Ford F250 with Spray-In Bed LinerWhen installing the Camper Tie Down # TDSF you will need to do a little bit of drilling into the truck's bed, but overall it won't interfere or damage your spray-in bedliner. You will also want the Camper Tie Down Hardware Package, # TDHP to connect the camper to the tie downs.
view full answer... - Brophy Tie Downs that Fit 2017 Toyota Tundra Short BedFor a set of bed mounted camper tie downs I recommend the Brophy Stake Pocket Mounted Camper Tie Downs part # HSAB if your truck bed does not have stake pockets. In order to attach your truck bed camper to these tie downs you will also need a set of turnbuckles like the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
view full answer... - Will Brophy Camper Tie Downs # TDSF Fit a 2009 Ford F-150 Super Cab Short BedThe Brophy Camper Tie Downs, part # TDSF are a universal application for full-size trucks and they will fit a 2009 Ford F-150 Super Cab short bed . The hardware to mount the tie downs to the vehicle is included. These tie downs can be used on campers that have a total length of up to 8 feet. I am including a link to the installation instructions. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your vehicle. The...
view full answer... - Hardware Needed to Mount a Camper in the Bed of a 2002 Ford F-150To mount your camper in the bed of your 2002 Ford F-150, you can use the Brophy Camper Tie Downs, # TDSF, as long as your camper is not longer than 8 ft. These tie downs will install in the stake pockets on the top of your truck bed walls. If your camper is longer than 8 ft, then I recommend using the Brophy Camper Hold Downs, # HSSF. These hold downs will not install in your stake pockets, but clamp around the inside lip of the bed rail (see photo). The underside of the bed rail must...
view full answer...
- Camper Tie Downs for a 2018 Ram 2500We have Brophy Stake Pocket Mounted Camper Tie Downs # TDSF but they are only for certain trucks up to the 2010 model year. You may be able to use Brophy Clamp On Camper Tie-Downs # HSAB though. They will fit if the external bed rail width is less than 5-1/2 inches and they require 2 inches of space beneath the lip of the bed rail. Use these with turnbuckle kit # TDHP. The other option is custom frame mounted tie downs. Which ones will fit depends on the configuration of the truck. I have...
view full answer... - Recommended Truck Bed Camper Tie Downs for 2004 Ford F150According to my contact at Brophy, the # TDSF stake pocket tie-downs will work with your truck, but your camper would need to be 8 feet long or shorter. You would also need the Tie-Down Hardware package, part # TDHP which includes the turnbuckles and chains. Their # HSSF system will not work with the 2004-2008 F150 Trucks. If your camper is longer than 8 feed, Torklift offers some tie down solution, but I would need more information about your truck. I would need to know: Does truck have...
view full answer... - Available Frame-Mounted Truck Camper Tie Down Kits for 2015 Ram 1500We do have truck bed camper tie downs for the 2015 Ram 1500 that appear on the linked page, but these are all the frame-mount type and their fit is very specific to the truck's total configuration. These TorkLift tie down sets, such as # TLD2134 and # TLD3107 which fits the 5-1/2 foot bed without board or step underneath truck bed and with a factory installed hitch, are custom designed for your truck and allow for a more stable camper installation without loss of ground clearance. These...
view full answer... - Can You Get A Single Brophy Stake Pocket Mounted Camper Tie-DownUnfortunately the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF only come as a complete kit so you wouldn't be able to purchase just one. That being said, if one broke the others might not be too far behind so it definitely wouldn't hurt to replace each one just to ensure the safety of your truck and camper.
view full answer... - Camper Tie Down Recommendation for a 2011 Ford F-150 HSSF and TDSF ComparisonThe Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2011 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Can Longer Screws be Used when Installing Brophy Stake Pocket Tie Downs on a 2005 Ram 1500For your 2005 Dodge Ram 1500 and the Brophy camper tie downs # TDSF you will need hardware that is the right grade and for the right material (in this case steel) just longer than the included hardware. I recommend using grade 8 hardware. A hardware store should have higher grade hardware that you can use. It may be indicated and GR8 for grade 8. If you have no pre-drilled any holes for the hardware you may need to drill some small pilot holes so the hardware will bite.
view full answer... - Truck Bed Camper Tie Downs for 2000 Ford F250 with Plastic Bed LinerAs long as your camper is no longer than 8 feet, and you do not mind having the tie-downs permanently installed in the stake pockets, the # TDSF tie-downs would be my recommendation. Unlike the # HSSF, trimming or cutting the bed liner will not be required. The # TDHP tie down hardware will also be needed to attach the camper to the tie down bracket. You can see current pricing by clicking the provided link.
view full answer... - Camper Tie Down Recommendation for a 2013 Ram 3500The camper tie downs # HSSF fit most domestic pickups. The only exclusions are as follows: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups They should be no problem on your 2013 Dodge Ram 3500HD Short Bed. I have linked a video and the instructions for the tie downs for you. I also recommend the hardware package to match the tie downs, # TDHP. The part # TDSF is not recommended...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.