Product Experts Available Now!
Call 1-800-940-8924
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(2236 reviews)
Price: $387.71
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Number: TLT3303
In Stock
$387.71
Retail:$414.99
You Save: $27.28
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2236)
- Q & A (0)
- Photos
- Used (1)
TorkLift Truck Camper Tie Downs - TLT3303
Highlights
- Secure Ride Stability: Frame-mounted tie-downs distribute camper weight evenly for steady handling.
- Damage-Free Install: Bolts to existing frame holes with little to no drilling or modification.
- Low-Profile Look: Arms remove when not in use, keeping brackets nearly hidden under the truck.
- Corrosion Protection: Black powder coated steel resists rust and wear from road exposure.
- Reliable Anchor Connection: Two pin holes let you set the best angle for solid, secure turnbuckle tension.
Features to know about
Stable Handling on Long Hauls: Frame-Mounted Tie-Downs
When you’re covering long distances with a camper in the bed, stability makes all the difference. These TorkLift rear tie-downs mount directly to the truck’s frame—the strongest part of the vehicle—so the camper’s weight is spread evenly and sits lower for better handling. That keeps your rig from feeling top-heavy or swaying in crosswinds. With a secure frame mount, the camper stays put mile after mile.
Install Without Drilling: Custom-Fit Design
These tie-downs bolt to pre-existing holes in the frame for a clean, bolt-on install with little to no drilling. Because no cutting or modifications are needed, you keep the full strength of your truck’s frame. The custom fit also means minimal loss of ground clearance, so you don’t have to worry about dragging hardware on uneven roads when you’re off exploring.
Clean Look When Not in Use: Removable Arms
Once the trip’s over, you can remove the tie-down arms from their brackets and keep your truck looking factory clean. The brackets tuck up under the vehicle so they’re barely noticeable when not in use. It’s a simple setup that doesn’t get in the way of daily driving.
Built Tough: Powder-Coated Steel Construction
Each tie-down is made from powder-coated steel to stand up to road grime, rain, and salt. The durable finish resists corrosion and keeps the parts looking good after many seasons of use. This heavy-duty build gives you confidence that your tie-downs will hold strong through rough roads and changing weather.
Secure Connection Options: Adjustable Arm Extension
The shank on each arm has two pin holes so you can choose how far out it extends—perfect for clearing sidewalls or fenders while keeping a solid anchor point. Two mounting holes on each plate let you fine-tune your turnbuckle angle for a firm, balanced hold on your camper. Once tightened down, everything stays steady and ready for travel.
Specs
Construction
- Material: Black powder coated steel
- Mount Type: Frame-mounted
- Fit: Custom fit
- Location: Rear tie-downs
Installation
- Mounting: Uses pre-existing holes in the frame
- Drilling Required: Little to no drilling required
- Installation Hardware: Included
Included Components
- Quantity: 2 rear tie-downs
- Hardware: Installation hardware included
Performance
- Adjustability: Adjustable arms for simple, secure connection
- Anchor Options: Two anchor holes for best angle
- Design: Mounts tight to the vehicle’s frame with minimal ground clearance loss
- Corrosion Resistance: Powder coated for protection
- Appearance: Arms removable for near-invisible brackets when not in use
Origin and Warranty
- Country of Manufacture: USA
- Warranty: Lifetime warranty
T3303 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
This Product Fits The Following Vehicles
- 2005 - 2015 Toyota Tacoma 2WD - no running boards or cab length only boards - factory hitch
- 2005 - 2015 Toyota Tacoma 4WD - no running boards or cab length only boards - factory hitch
Customer Satisfaction Score:
73% were satisfied with this product
27% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.7
2236 reviews
by:
Solo
08/15/2015
My order arrived 2 days ahead of the listed delivery date. I am very pleased! I appreciate the excellent customer service! You can use this email for satisfied customer reviews.
Best Wishes! Solo
Best Wishes! Solo
by:
Daniel
02/10/2024
by:
Laura
08/01/2023
by:
Robert
05/27/2025
First, Andy was great to work with and very helpful.
I bought and installed the frame mounted Torklift camper mounts on my 2021 GMC 2500HD Sierra Denali and I’m very pleased with them, they’re stout. As long as you’re mechanically inclined and can follow instructions you should be able to install them yourself without assistance.
I bought and installed the frame mounted Torklift camper mounts on my 2021 GMC 2500HD Sierra Denali and I’m very pleased with them, they’re stout. As long as you’re mechanically inclined and can follow instructions you should be able to install them yourself without assistance.
by:
Mark
06/05/2024
These tiedowns were exactly as advertised and fit my 2023 f350 4wd crew cab perfectly using preexisting holes and mounts. They even came with wire feeders to feed the bolts through the holes on the frame. Instructions were very good and easy to follow. Can adjust the width of tie down and can also drill new holes to customize the width. I highly recommend these.
Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!
by:
Joe
09/16/2025
I have a 2024 ram 3500 dually stock max tow package.
I figured I’d put pictures up that are of top quality and lighting as most instructions on trailer a vague and generic.
This product fit perfectly and it went on in 15 mins for both sides. ( no rusty bolts to mess with though)
Attached are photos of before and after install and bolt placement.
I figured I’d put pictures up that are of top quality and lighting as most instructions on trailer a vague and generic.
This product fit perfectly and it went on in 15 mins for both sides. ( no rusty bolts to mess with though)
Attached are photos of before and after install and bolt placement.
by:
Benoit
09/01/2026
Product was refurbished but sold as new.
Once again etrailer.com prefer to sponsor a YouTube channel the literally insult viewers (BTBRV) than be honest and sell new parts (as advertised)
Once again etrailer.com prefer to sponsor a YouTube channel the literally insult viewers (BTBRV) than be honest and sell new parts (as advertised)
by:
Charles
08/18/2026
great fit, works great, strong parts, works perfect! etrailer was excellent in making sure I received the correct parts. I highly recommend etrailer, if in doubt, call them, don't try and wing it, they will set you up with the correct parts! I will use etrailer again!
by:
Dan L.
07/17/2026
Torklift makes a quality product. This is easy to install. Just watch the etrailer video.
by:
Nick
06/26/2025
For the 2025 Chevy Silverado 1500 6 1/2 foot bed no running boards, Driver’s side bracket does not lineup. It is off by an eighth of an inch or so. Passenger side is fine.
Potentially my truck bed is not the same size or there was an issue with the piece I received. Other than that bolted together very easy to the frame.
Potentially my truck bed is not the same size or there was an issue with the piece I received. Other than that bolted together very easy to the frame.
by:
Monty
07/09/2025
As soon as I ordered it e trailer people went right to work and got this order moving. Awesome
Monty
7/10/2026
Product is working great , what is fantastic is the engineering for the fit to the vehicle and the tools they give you to fish and hold bolts where they need to be during installation. Great thought process for instruction for installation.
by:
Seth
10/23/2026
Would be 5-star if packaged properly to protect the paint from getting beat up in transport. The product itself is great and fits perfectly. Easy to install.
by:
Christopher
12/18/2024
I have been very happy with these tie-downs. They are VERY easy to install, require no drilling or modification to the hitch and hide away nicely when the inserts are removed. ~9,000 miles with our camper so far and no issues. These are on a 23 F250 PowerStroke short bed.
Brooke M.
12/18/2024
Yay! Thats what we want to hear! Where all did you get to go in those 9,000 miles?
by:
Jennifer
03/21/2021
My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
Jennifer
3/22/2022
These are still working perfectly.
by:
Phil
03/15/2026
Awesome product! I purchased TorkLift camper tiedowns (both front and rear) for my 2015 Ford F-350. Installation instructions were easy to follow (pictures were a big help) and the "no drill" made it simple. Tiedowns were extremely solid as the fronts bolted to the leaf spring bracket and the rear to the factory hitch. I highly recommend this product.
by:
Wade
07/01/2026
The best system one can buy for worry free travel. Etrailer communication has been superb.
by:
David c
03/01/2026
I installed the tie downs last night. I had help from my wife, they were reasonably easy to install. Everything went on just fine. No drilling or any difficulty with fit. My only difficulty was I got two bolts that had a different thread pitch than the nuts. No problem, went to the local hardware store and got what I needed. All good! I think the tie downs are made very strong. I really like them. Thanks E-trailer! Great product and great customer service. When in need of ..... I will purchase from E-Trailer again. Sincerely David C. Pennsylvania
by:
Okie
11/10/2020
I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.
Floyd D.
11/11/2021
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
by:
Keith
09/05/2022
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
Heather A.
10/12/2022
Thank you for your photo. Torklift does recommend to use the hitch adapter for the 2020 Ford F-250. The adapter does need to be turn horizontally to fit inside the hitch not vertically.
by:
Duke
06/17/2025
They installed pretty easy. However the business end twists in the receiver when put under tension. I’m disappointed that it’s not a tight fit especially for what they cost.
by:
Ken
04/08/2026
I received my forklift truck mounts and installed the front mounts. Not too challenging but if you watch the video of the install it makes it a little easier. When I went to install the rear mounts I discovered they weren’t the correct ones. I contacted Ryan at E-Trailer and she sent out the correct ones immediately. I received them in a couple days, installed them and all is well. Thank you for the quick service Ryan!
-Ken
-Ken
by:
David
10/13/2024
Somehow I plugged in all my vehicle info and the website lead me to the wrong part. I explained my situation to Paul and handled the return/new order perfectly...and within an hour I was notified that the correct part had shipped..it arrived in two days!
I have been a customer for 10 years and everything I have ordered has been a quality item, and in this case the customer service was off the charts good.
I have been a customer for 10 years and everything I have ordered has been a quality item, and in this case the customer service was off the charts good.
David
10/14/2025
Bought these tie-downs a year ago and they have proven to be easy to use, very sturdy, and hold my Palomino to the truck bed tightly.
by:
Craig
03/25/2022
Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.
by:
Murray
04/21/2022
The TorkLift camper tie downs you delivered were easy to instal and certainly served the application intended. The best part of the purchase was the way that you followed up to make sure that I had received the order and that they fit as they were supposed too. And now a year later you have contacted me again, to ensure that I am pleased with my purchase. GREAT product, and Awesome Service.
Much appreciated
Much appreciated
by:
Angel O
12/20/2020
Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD3107). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.
25
2236
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
- Recommended Camper Tie Downs For A 2014 Toyota Tacoma If you're needing camper tie downs for your 2014 Toyota Tacoma then there are two different options based on whether your Tacoma is 2WD or 4WD: For 2WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2308 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303. For 4WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303. I do want to...
view full answer... - Weight Of The TorkLift # TLT2303 And # TLT3303 Camper Tie-DownsThe TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 weighs approximately 17lbs and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303 weighs approximately 19lbs.
view full answer... - Correct TorkLift Tie-Downs for a 2014 Toyota Tacoma 4WDSince your 2014 Toyota Tacoma is a 4WD you need the following tie-downs: - Front # TLT2303 - Rear # TLR3500 These fit whether you have a factory hitch installed or not, but please note you truck can't have a step or board installed otherwise they won't be compatible.
view full answer... - Rear Torklift Truck Bed Camper Tie Downs for 2001 Ford F350 With Factory HitchAlthough the # TLT3303 tie-downs aren't a fit for your 2001 Ford F350, we do have a rear tie down fit that's compatible with a factory hitch. For a steel tie-down, use # TLF3001 or # TLF3001A for an aluminum/stainless tie down.
view full answer... - TorkLift Basic SpringLoad Turnbuckes Compatibility with 2013 Toyota Tacoma with Factory HitchThe TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 will work on your 2013 Toyota Tacoma with factory hitch. You will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 and Rear # TLT3303 for the proper fit on your 4 door 4x4 with 6 foot bed and factory hitch if you don't already have the tie downs for your truck. Let me know if you have further questions.
view full answer... - What Size Pins Connect the Slide-In Part of the TorkLift Custom Frame-Mounted Camper Tie-Downs?I reached out to my contact at TorkLift International, and the pins you are referring to are 1/4 inch diameter and 2-1/2 inches long for the TorkLift Custom Frame-Mounted Camper Tie-Downs for a Toyota Tacoma. These frame mounts are vehicle specific and any step rails could cause interference.
view full answer... - Recommended TorkLift Camper Tie-Downs For A 2014 Toyota Tacoma 4WDFor 4WD models you'll need to use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2303 for the front and # TLT3303 for the rear. If you have a 5' bed and running boards under the cab will need to remove the running boards to install tie down. To complete your setup you'll also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.
view full answer... - Torklift Tie Downs That Fit 2007 Toyota TacomaIf your 2007 Toyota Tacoma is a 4WD the front Torklift Camper Tie Down you'd need is the part # TLT2303, if 2WD part # TLT2308. If you have a factory hitch the rear tie down you'd need is the part # TLT3303 or if you have an aftermarket hitch part # TLR3500.
view full answer... - Recommended Camper Tie-Downs And Turnbuckles For A 2006 Toyota Tacoma To mount a truck bed camper to a 2006 Toyota Tacoma you would need the following tie-downs: For 4WD Models without a board or step underneath the bed and a factory hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3303 For 2WD Models without a board or step underneath the bed and a factory hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2308 TorkLift Custom Frame-Mounted Camper Tie-Downs...
view full answer...
Do you have a question about this Truck Camper Tie Down?
Used Items Available
Condition: Surface Scratches
Notes: Item has costmetic scratches. Otherwise like new condition.
Info for this part was:
Expert Research:
Mike L
Written by:
Lindsey S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
Installed by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
6/3/2025
Install looks great, Robert! Do you already have your camper ready to go for an adventure?