Product Experts Available Now!
Call 1-800-940-8924
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(2237 reviews)
Price: $387.71
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Number: TLF3004
In Stock
$387.71
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2237)
- Q & A (0)
- Photos
TorkLift Truck Camper Tie Downs - TLF3004
Highlights
- Stable Ride on Long Trips: Frame-mounted design keeps camper weight low and evenly spread.
- Damage-Free Install: Bolts to factory holes in the frame with little or no drilling needed.
- Clean Look When Unloaded: Arms remove easily so brackets stay tucked out of sight.
- Rust-Resistant Strength: Black powder-coated steel stands up to road grime and corrosion.
- Secure Camper Hold: Two anchor holes let you set the best angle for firm, balanced tension.
Features to know about
Secure Handling on the Long Haul: Frame-Mounted Tie-Downs
These frame-mounted tie-downs keep your camper stable and your truck handling like normal, even on long trips or rough roads. Because they attach directly to the frame—the strongest part of your vehicle—they spread the camper’s weight evenly and lower the center of gravity. That means less sway and better control in crosswinds or uneven terrain. You get a smoother, safer ride that feels balanced and confident mile after mile.
Clean Look When You’re Not Hauling: Removable Arms
You don’t have to sacrifice your truck’s looks to haul a camper. The brackets tuck up tight against the frame, keeping them nearly hidden when the arms are removed. Once you’re done traveling, pull off the arms and you’ll hardly notice the brackets are there. It’s a quick way to switch from hauling mode back to a clean, everyday look without tools or hassle.
Simple Setup: Custom Fit with No Drilling
Installing these tie-downs is straightforward because they bolt right into pre-existing holes in the frame. There’s little to no drilling and no need for cutting or modifications, so you can keep your truck’s structure intact. The custom-fit design ensures the tie-downs mount tight to the frame with minimal loss of ground clearance, making them easier to live with whether you’re loaded up or not.
Built Strong: Powder-Coated Steel Construction
Made from black powder-coated steel, these tie-downs are built to resist corrosion and hold up under tough conditions. The finish protects against rust from road salt or weather exposure, keeping them looking good and performing reliably trip after trip. Every set includes two rear tie-downs and the hardware needed for installation, so you can count on a secure mount that’s built to last.
Secure Camper Connection: Adjustable Anchor Options
Each tie-down arm has two pin holes so you can extend it as needed to clear fenders or sidewalls. The attachment plate also gives you two anchor holes, so you can find the best angle for your turnbuckles (sold separately). This setup helps keep tension balanced and your camper firmly in place from multiple angles—no shifting or sliding on the road.
F3004 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
This Product Fits The Following Vehicles
- 2005 - 2010 Ford F-250 Super Duty 6-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
- 2005 - 2007 Ford F-250 Super Duty 6-3/4 Foot Bed - wheel-to-wheel running boards - factory hitch
- 2005 - 2010 Ford F-250 Super Duty 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 2005 - 2007 Ford F-250 Super Duty 8 Foot Bed - wheel-to-wheel running boards - factory hitch
- 2005 - 2010 Ford F-350 Super Duty 6-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
- 2005 - 2007 Ford F-350 Super Duty 6-3/4 Foot Bed - wheel-to-wheel running boards - factory hitch
- 2005 - 2010 Ford F-350 Super Duty 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 2005 - 2007 Ford F-350 Super Duty 8 Foot Bed - wheel-to-wheel running boards - factory hitch
- 2008 - 2010 Ford F-450 Super Duty 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 2000 - 2012 Ford Ranger 6 Foot Bed - factory hitch
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.7
2237 reviews
by:
Jeff
03/19/2026
Rear tie down works great, easy to install.
Virginia was great getting the part I needed.
Virginia was great getting the part I needed.
by:
Robert J.
12/10/2016
Excellent product and excellent customer service! After a year products still going strong.
by:
Adam
07/25/2019
Very heavy duty and very fast installation.
by:
Robert
05/18/2020
Everything I expected and more. The quality is obvious as soon as you open the box great product can't wait to get it installed and pick up mu new camper.
by:
Jason
06/06/2024
Great product, super easy to mount and instructions were very clear.
by:
Kelvin
05/04/2024
Product appears to be high quality. Very easy to install, took about 20 minutes but that includes reading the instructions.
by:
Mikey P
11/30/2020
Prefect fit. Much nicer set up for my camper.
by:
Gary
07/14/2021
Work extremely well.
by:
Chris
08/29/2022
Easy install and works great!
by:
mike d
07/08/2016
works well
by:
Timothy
07/08/2022
Great product very easy to install and use
by:
Bruce d
08/10/2017
Arrived on time. Installed smoothly. Great service
by:
Kenneth
10/12/2019
Good quality- Easy install-- Pricey.
by:
Kristie
01/23/2023
Great quality and fast delivery
by:
Terry
03/19/2024
Super easy
by:
Dennis
01/08/2019
Great product...
by:
Maria
01/12/2023
by:
Levi
11/30/2022
by:
Rayce
07/14/2021
by:
Jeffrey
12/19/2022
by:
Jeremy
04/26/2021
by:
Alfre
05/13/2021
by:
Jesse
07/28/2022
by:
Alan
07/29/2022
by:
Todd
07/24/2022
25
2237
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
- Compatible TorkLift Tie-Downs For A 2006 Ford F-350 Super Duty Dually With 8' BedSince you indicated that your 2006 Ford F-350 Super Duty Dually has an 8 Foot Bed with a board or step underneath the truck bed with a factory installed hitch the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 you referenced would be a compatible fit. These two are the only compatible TorkLift options for your vehicle. You will also need some turnbuckles to secure your truck bed camper to your tie-downs....
view full answer... - Recommended Camper Tie-Downs For A 2008 Ford F-250 With A 6-3/4' Bed For your 2008 Ford F-250 with a 6-3/4' bed you'll need the TorkLift Camper Tie-Downs - Front # TLF2012 and Rear # TLF3004. If you have running boards or steps that extend under the bed then you'll need to remove them in order to fit the front tie-downs. To Complete your setup you'll also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.
view full answer... - Weight Difference Between Aluminum and Steel Torklift Tie DownsThe part # TLF2012A weighs 27 lbs and the # TLF2012 weighs 31 lbs. The # TLF3004A weighs 35 lbs and the # TLF3004 weighs 28 lbs. I would not recommend using two hitch extenders with a bike rack. You might consider a front hitch to carry a bike rack.
view full answer... - Air Bag Suspension Kit for 2006 Ford F-350 and Torklift Camper Tie DownsThe best air bag kit for your 2006 Ford F-350 that fits your budget is the Firestone Ride Rite kit part # F2400 which I attached an install video on for you to check out as well. The Torklift tie downs part number # TLF2007 and # TLF3004 are both a fit as well. For a hitch extender you'd need something like the part # RP45292 as the # TLE1636 can only fit Torklift hitches.
view full answer... - Recommended Frame-Mount Camper Tie-Downs for a 2006 Ford F-350 Long Bed Dually with Factory HitchIf you do indeed have a factory hitch on your 2006 Ford F-350 Dually long bed, the options available for you for frame-mounted camper tie-downs on your depend on if you have boards or steps installed on your truck. If you do have boards/steps installed on your truck, I recommend the following setup: - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 - TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 If you do not have boards/steps installed on your truck,...
view full answer... - Frame Mount Camper Tie Down Recommendation for 2007 Ford F-250Hey Ryan, thanks for all of the info you listed on your 2007 Ford F-250. Based on all of that you would want the frame mounted Torklift tie downs part numbers # TLF2011 and # TLF3004 which do not require any welding or drilling to install.
view full answer... - Truck Bed Camper Tie-Downs to Fit a 1988 Chevrolet 1500 PickupUnfortunately, the # TLF3004 and # TLF2011 camper tie-downs are for Ford trucks and will not fit your 1988 Chevrolet 1500. I've linked our selection that is designed for your truck. In order to give you a specific recommendation I'll need to know your truck's bed length, if it has a factory hitch, TorkLight hitch, or another hitch, and if it has a step or board under the truck.
view full answer... - Camper Tie Down Recommendation For 2009 F-350 Single CabIf you have an 8' truck bed I recommend # TLF2011 and # TLF3004. If you have a 6-3/4' truck bed I recommend # TLF2012A and # TLF3001A. Note: These tie-downs are made for a factory installed hitch.
view full answer... - Are Torklift Camper Tie Downs Compatible Between 2011 Ford F-350 and 2006 F-350?The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2016 and Rear # TLF3006 from a 2011 Ford F-350 with 8 foot bed will not fit a 2006 F-350. The 6-3/4 foot bed # TLF2012 and # TLF3006 will also not fit. Instead you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2007 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 for a 6-3/4 foot bed or # TLF2011 and # TLF3004 for an 8 foot bed. These are fits are based on no board or step...
view full answer... - Camper Tie-Downs for a 2006 Ford F-350 Super Duty with a 6-3/4 Bed and a Factory Installed HitchIt looks like your 2006 Ford F-350 with the 6-3/4' bed has no rails under the bed and a factory installed hitch. For this configuration, you have two options, depending on the hitch. If your hitch has an open-ended crosstube, then the TorkLift set is your best option, part # TLF2007 for the front and part # TLF3004 for the rear. These tie downs do not require drilling, making them the easier installation. I've linked to video reviews of both. If your hitch does not have an open-ended...
view full answer... - Torklift Tie Downs # TLF2012 and TLF3004 for Ford F-250The Torklift Tie Downs part # TLF3004 and # TLF2012 are sold as complete kits and do not have replacement parts sold for them. With either kit though you'll be able to use the Fast Guns so you wouldn't be replacing everything that you have currently.
view full answer... - Frame-Mounted Camper Tie-Downs for 2007 Ford F-250 With Short Bed & Factory HitchWe can get you set up with rear tie-downs for your 2007 Ford F-250 short bed with a factory hitch and no running boards to go with your current front TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2007. However, since you already have TorkLift tie-downs in front, you'll need the frame-mounted tie-downs for the rear as well in order to utilize turnbuckles from the same manufacturer to maintain compatibility. So what you'll need for rear tie-downs are the TorkLift Custom Frame-Mounted...
view full answer... - Which Torklift Camper Tie Downs Fit 2005 Ford F-250 Short Bed with Steps and Factory HitchI checked with Torklift and for your 2005 Ford F-250 short bed, with steps, and a factory hitch the correct custom camper tie downs are part number # TLF4007 for the front and # TLF3004 for the rear. If your looking for turnbuckles we have the stainless steel part # TLS9529-2-LK which are going to work great as well! They come with locks too which is nice. I attached a couple install videos for this for you to check out as well.
view full answer... - Correct Front Frame Mounted Camper Tie-Downs for a 2006 Ford F-250 8' BedIt sounds like you might be looking for a set of frame mounted camper tie downs and if that's the case we do have an option for you in the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2011 which are a fit for a 2006 Ford F-250 8' Bed (No Step Under Bed). If you ever need a matching rear set then you'd want the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF3004. Then, for a set of compatible turnbuckles I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted...
view full answer... - Recommended Camper Tie-Downs for Use in 2008 Ford F-250 with 8-Foot BedYour best choice in a camper tie down will depend on how your F-250 long bed is equipped. On the linked page you can use the drop-down menu at the top of the page to select how your truck is equipped, specifically whether it has a board or step underneath the bed and the type of hitch that is installed. For example, if you have a factory hitch with an open cross tube and no board or step underneath truck bed Torklift offers their # TLF2011-TLF3004. The linked video shows installation. The...
view full answer... - Recommended TorkLift Camper Tie-Downs for 2007 Ford F-350 with Factory Hitch If your 2007 Ford F-350 Super Duty has an 8 foot bed, does not have any board or step underneath the truck bed, and is equipped with the factory hitch, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2011 (for the front) and # TLF3004 (for the rear). These sturdy tie-downs are custom-fit for this truck and provide a clean, unobtrusive look when installed. They will give you attachment points at the front and rear of your truck for securing a bed-mounted camper. The tie-down...
view full answer... - Recommended Camper Tie-Downs for a 2008 Ford Ranger Extended Cab 4x4 6 Foot BedThe Brophy stake pocket camper tie downs part # TDSF will fit most full-size pickups with straight fenders and single-wall construction. Since your 2008 Ford Ranger extended cab is considered a compact pickup truck, the Brophy stake pocket camper tie downs won't be a fit. If your Ford Ranger has a 6 Foot Bed - without running boards or steps underneath the truck bed, and with a factory installed hitch, then use # TLF2013 for the front and # TLF3004 for the rear. If your Ranger has a 6...
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2008 Ford F-350 Short Bed Factory HitchThe correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2008 Ford F-350 Short Bed No Step Factory Hitch is part # TLF2012 for the front and part # TLF3004 for the rear. These can then be paired with the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK to complete your setup.
view full answer... - Weight of TorkLift Truck Bed Camper Tie Downs for 2005 Ford Super Duty TruckThe TorkLift # TLF2007 weighs just under 35 lbs and the # TLF3004 weighs just under 25 lbs minus the packaging.
view full answer... - TorkLift Rear Camper Tie-Downs for 2007 Ford F-350 with 8 Foot Bed and Factory Hitch If your 2007 Ford F-350 has the 8 foot bed, is equipped with the factory trailer hitch, and doesn't have a board or step beneath the truck bed, the correct TorkLift Rear Tie-Down Kit is part # TLF3004 or # TLF3004A for the aluminum model that will resist rust and corrosion. If you also need the front kit you will use # TLF2011 or # TLF2011A (aluminum).
view full answer... - Recommended Camper Tie Downs and Turnbuckles for 2007 Ford RangerThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF you asked about can work for your 2007 Ford Ranger but are not a custom fit. These are universal fit options. The Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB or # HSSF are also universal fit options. The only confirmed fit we have for a custom fit on your truck is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2013 and rear # TLR3500 (or rear # TLF3004 if you have the TorkLift hitch). These are confirmed...
view full answer...
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
Written by:
Lindsey S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.