Product Experts Available Now!
Call 1-800-940-8924
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(2237 reviews)
Price: $387.71
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Number: TLF3001
In Stock
$387.71
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2237)
- Q & A (0)
- Photos
TorkLift Truck Camper Tie Downs - TLF3001
Highlights
- Stable Camper Handling: Frame-mounted design spreads weight evenly and lowers center of gravity.
- Damage-Free Install: Bolts to pre-existing frame holes with little to no drilling needed.
- Clean Truck Look: Removable arms keep brackets nearly hidden when not hauling.
- Secure Tie-Down Connection: Two anchor holes let you set the best angle for tension and hold.
- Built to Last: Black powder-coated steel resists rust and holds up to rough travel.
Features to know about
Secure Heavy Campers with Confidence: Frame-Mounted Strength
These rear tie-downs bolt directly to your truck’s frame, creating solid anchor points that keep your camper stable mile after mile. Because the frame is the most rigid part of the vehicle, you don’t get the flex or movement that happens with bed or bumper mounts. The load stays low and balanced, so handling feels steady even on rough roads or in crosswinds. It’s a safer, more comfortable setup for long trips with a heavy camper.
Install Without Drilling: Custom-Fit Tie-Downs
The custom-fit design uses pre-existing holes in the frame, so there’s little to no drilling and no need for cutting or modifications. That means you can bolt them on quickly with basic tools and be ready to load your camper in no time. The brackets mount up tight to the frame, keeping ground clearance nearly unchanged so you won’t drag or snag them when driving off-road or over uneven terrain.
Keep a Clean Look When You’re Not Hauling: Removable Arms
When your camper isn’t loaded, you can pull the arms out of the brackets and leave them off. The frame-mounted brackets tuck up close underneath, staying nearly invisible from the side. You keep the clean look of your truck without bulky hardware hanging down or sticking out.
Built Tough for the Road Ahead: Powder-Coated Steel
Made from heavy-duty powder-coated steel, these tie-downs stand up to road grime and weather without letting rust take hold. The durable finish adds protection against corrosion, keeping them strong and looking good after years of hauling through rain, salt, and sun.
Adjust for a Perfect Hold: Dual Anchor Points
Each arm includes two pin holes so you can extend it just enough to clear fenders or bodywork, and two anchor holes in the attachment plate help you find the best angle for your turnbuckles. That extra flexibility lets you dial in a secure hold that keeps the camper locked down tight from multiple directions.
Specs
Construction
- Material: Black powder coated steel
- Mount Type: Frame-mounted
- Mount Location: Rear
- Fit Type: Custom fit
- Corrosion Resistance: Powder coated finish
Installation
- Drilling Required: Little to no drilling required
- Installation Method: Uses pre-existing holes in the frame
- Ground Clearance: Minimal loss of ground clearance
- Installation Components: Includes 2 rear tie-downs and installation hardware
Functionality
- Connection Points: Creates attachment points for securing your camper to your truck bed
- Compatibility: Pairs with front tie-downs (sold separately)
- Required Accessories: Requires turnbuckles (sold separately) to attach camper to tie-downs
- Anchor Holes: Two anchor holes to achieve the best angle for a secure hold
- Adjustability: Arms extend from truck body to clear bowed sidewalls and fenders
- Removability: Arms can be removed to remain virtually invisible beneath the vehicle
- Handling Benefits: Distributes weight evenly and lowers center of gravity for improved handling
- Appearance: Brackets remain nearly hidden when arms are removed
Origin and Warranty
- Country of Manufacture: Made in the USA
- Warranty: Lifetime warranty
F3001 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Replaces 39146
This Product Fits The Following Vehicles
- 2000 - 2003 Ford F-150 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
- 2000 - 2003 Ford F-150 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 1997 - 1999 Ford F-150 and F-250 Light Duty 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
- 1997 - 1999 Ford F-150 and F-250 Light Duty 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 2004 - 2004 Ford F-150 Heritage Series 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
- 2004 - 2004 Ford F-150 Heritage Series 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 1999 - 2004 Ford F-250 Super Duty 6-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
- 1999 - 2004 Ford F-250 Super Duty 6-3/4 Foot Bed - wheel-to-wheel running boards - factory hitch
- 1999 - 2004 Ford F-250 Super Duty 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 1999 - 2004 Ford F-250 Super Duty 8 Foot Bed - wheel-to-wheel running boards - factory hitch
- 1999 - 2004 Ford F-350 Super Duty 6-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
- 1999 - 2004 Ford F-350 Super Duty 6-3/4 Foot Bed - wheel-to-wheel running boards - factory hitch
- 1999 - 2004 Ford F-350 Super Duty 8 Foot Bed - no running boards or cab length only boards - factory hitch
- 1999 - 2004 Ford F-350 Super Duty 8 Foot Bed - wheel-to-wheel running boards - factory hitch
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.7
2237 reviews
by:
Jonathan L.S.
10/12/2017
Very durable and good looking product. It is a great investment for someone like me who carry heavy camper on the bed of my pick-up truck. Would highly recommend it.
by:
Jim R.
04/23/2014
This product is made to fit several versions the Ford F250- mine is a 2002 model. This attached to the factory installed hitch just as it said it would. The only derivation came when I went to attach the bracket which locks over the bolt and existing crossbar. The angle of the bolt did not match the angle of the fitting, so it does not quite fit as snug as I would like. Nonetheless, it holds well so far, being that the acorn nut tightens down and locks things in place. I hauled a 1 ton slide-in camper 60 miles without any hassle. This product does what Etrailer said it would, and along with its counterparts in the front of my truck box, - also an etrailer purchase- I have no worries about summer camping season! I am a satisfied customer.
by:
Kevin
09/14/2019
Tayler was very helpful with finding the right part and filling my order. shipping was fast, the parts are well made and installation was easy. over all it was a great shopping experience..
Kevin B.
9/15/2020
they work great, easy to install and securely hold my camper
by:
Jim B
05/21/2014
The Torklift True Frame Mounted Camper Tie Downs I purchased for my 2004 F350 with single rear wheels seem to be constructed out of sufficient steel gauge and grade of steel to adequately hold a camper in the truck bed. This method of securing a camper to the bed of the pick up is probably the most secure method available because it does not rely on the strength and integrity of the bed walls. My experience with this Ford is that the pickup bed is not designed for certain weight bearing applications and such as supporting heavy overhead racks on rough roads. They are also probably not designed to handle the forces that may occur on rough roads, during an emergency maneuver, or during even a minor collision with a bed mount system. The same is probably true for Dodge and Chevy.
by:
BluntHeadTrauma
11/16/2018
TLF3001 fit my 1999 F250 SD with frame mount receiver hitch. Solid built with steel. Best way to secure your camper to the frame.
by:
Christopher
08/23/2020
Speedy service, was delivered when they said they would be.
by:
TJ
05/15/2017
Driver's side front tie-down was tough to install, my '99 Ford Super Duty wouldn't allow the placement of the 1" backer plate on the inside of the frame due to other OEM things installed in that channel of the frame area. I was able to get the bolt and star washer in. Other than that the whole system was straight forward and good quality!
by:
Jason
11/11/2018
Perfect fit on 2001 F350 crew cab with factory tow hitch. Super easy to install and work perfectly. Got front mounts to and also work perfectly. Definitely worth the money. Thanks TorkLift and Etrailer for another great bolt on product!!!
I'm a happy camper!!
I'm a happy camper!!
by:
Tom F
08/16/2019
all questions i asked were answered very well.the camper torklift tie downs were all as described and no holes had to be drilled,easy to install. very helpful staff.
by:
Gilbert C
04/11/2024
Frame mounted tie downs that attach to the reciever. No holes to drill!
by:
Timothy
05/12/2020
I've ordered thru e-trailer several times and the customer service has always been excellent. I will continue using e-trailer in the future as I know they won't disappoint me.
by:
Ricky
09/15/2025
Perfect fitment
by:
Larry J
04/02/2020
Exactly what we wanted. Installation was pretty easy for me, a 70's year old, and my wife provided her skillful assistance. We got about eight thousand miles on our damper last year.
by:
Bob
06/29/2020
Products came before promised and etrailer matched lower price I could have gotten [online] for the same products.
by:
Martin
12/02/2022
Used for a 2022 Palomino/Real-Lite on a 2002 Ford 150 SuperCrew and they work perfectly, I'm very pleased with my purchase
by:
Robin Robb
03/25/2021
Your salesman (Adam) was a 5 star your product a 4 had to customize back tie down Also overly expensive bills for 4 hunks of metal Give Adam a raise (very professional)
by:
Douglas
09/21/2021
Fast responding and quick shipping
by:
David
09/30/2020
Again the quality of the product is second to none. And installation was a breeze.
by:
Robert
10/06/2021
Great product, just what I needed and fair price. This web site is easy to navigate and ordering is a breeze.
Robert
10/7/2022
Still works as advertised and just the right product for use.
by:
David
06/28/2018
Fantastic product. Love 'em!
by:
J.R.
08/17/2019
quick deliver, very easy to install no drilling witch I'd like, bolt it right up no problem I give this product two thumbs up.
by:
Scott
04/26/2024
The parts arrived on time and the installation went super easy! All in all it took about 15 minutes!
by:
Bradley
07/15/2020
Fairly easy installation and solid as a rock. Great product for this application.
I would buy it again.
I would buy it again.
by:
Clint
01/28/2023
Installation took less than 10 minutes and were ready for use.
by:
Donna
09/16/2019
Easy to install and I'm a woman and I did it myself. They shipped it out really fast and still holding up !
25
2237
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
- Which Torklift Camper Tie Downs Fit 2004 Ford F-350 DuallyHey Mike, thanks for the picture of your setup. From that I can tell you have steps that stop before the truck bed which means the correct tie down kit from Torklift is the part # TL45NR which comes with the tie downs # TLF2007 and # TLF3001.
view full answer... - What Size are the Inner and Outer Tubes and Wall Thickness of TorkLift Camper Tie DownsThe TorkLift camper tie downs you referenced, # TLF2011 and # TLF3001 will have an outer assembly and an inner assembly. Tie down # TLF3001A will too but it has aluminum components. The measurements will be the same for all of these. I pulled # TLF2011 to take the measurements. The inner tube is smaller, 1-1/2 inches square with a wall thickness of 3/16 of an inch. The part of the inner tube that you tie the camper off to is 1/4 inch thick. The outer tube is larger at 2 inches square...
view full answer... - Does TorkLift Camper Tie-Down # TLF3001 Install in the Open Ends of the Hitch Crosstube Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down # TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install steps.
view full answer...
- Rear TorkLift Camper Tie Downs for a 1999 Ford F-350 with Factory Trailer HitchFor rear camper tie downs that will fit your 1999 Ford F-350 with factory trailer hitch use # TLF3001. I have included a link to the installation instructions for you. If you also need turnbuckles to go from the tie downs to the camper I have included a link to the TorkLift options for you.
view full answer... - Recommended Camper Tie Downs and Turnbuckles for a 2002 Ford F-250For your 2002 Ford F-250 I recommend checking out the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2007 for the front, and the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3001 for the rear. These tie-downs are American made, custom fit to your vehicle so there won't be any ground clearance loss as these hug your vehicle's frame, and are virtually undetectable when not in use. Additionally, you're also going to need a set of turnbuckles in which I suggest going with the...
view full answer... - Are Inserts Sold For TorkLift Frame Mounted Tie Downs on 2001 Ford F-350Inserts are not sold individually so you'd need the whole tie-down kit. For your 2001 Ford F-350 the rear tie-down is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3001. The front will depend on your bed length, and so long as you do not have running boards that go underneath the truck bed, the right fit is either: - 6-3/4' Bed: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2007 - 8' Bed: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2011 For...
view full answer... - Which Torklift Camper Tie Downs Fit 2000 Ford F-250 Short BedThe correct Torklift Camper Tie Downs you need for your 2000 Ford F-250 short bed without factory steps and a factory hitch is actually the part # TLF2007 and # TLF3001.
view full answer... - Best Camper Tie-Downs and Turnbuckles for 2004 Ford F-350 With 8 Foot BedThe best camper tie-downs and turnbuckles for your 2004 Ford F-350 with an 8 foot bed are from TorkLift because they offer the best strength and stability due to bolting directly to your truck's frame. The correct fit for the front tie-downs is going to depend on if your F-350 has running boards or steps that extend underneath your truck bed, though the rear tie-downs will be the same no matter what. - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3001 - Front (WITHOUT Step/Running...
view full answer... - Recommended Camper Tie-Downs For A 2000 Ford F-350 Dually 8 BedFor your 2000 Ford F-350 Dually 8ft bed - with board or step underneath truck bed and with a factory installed hitch the correct fitting camper tie-downs are the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3001. For turnbuckles I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 Item # TLS9529-2-LK. The quick-release levers on these turnbuckles...
view full answer... - Complete Camper-Tie Down Kit For 2002 Ford F-350 Short BedI verified directly with TorkLift for you that the correct tie-downs for your 2002 Ford F-350 Super Duty short bed are the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2007 - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3001 Frame-mounted tie-downs are great because they are going to distribute the weight of your camper across your truck's base instead of its bed to give you optimal stability and the best handling. You will also need turnbuckles,...
view full answer... - Camper Tie Downs for 2000 Ford Super DutyThere are several different types of tie downs, bed mounted, bumper mounted and frame mounted. For you 2000 Ford Super Duty I recommend frame mounted tie downs, they provide the strongest base for securing your camper. Since the attachment points are on the frame, which is lower than the bed, it distributes the weight better and gives you better handling and a more stable rig. The TorkLift Custom Frame-Mounted Camper Tie-Downs Front # TLF2007 and Rear # TLF3001 are a great example. The...
view full answer...
- Camper Tie Downs for a 2002 Ford F-250 and Arctic Fox CamperThe Brophy tie downs # HSAB should only be mounted to make contact with the metal of the bed so I would not recommend them for your 2002 Ford F-250 unless you can remove those caps. Since you are trading in the camper for perhaps another camper the best solution is to use custom fit frame mounted camper tie downs. There are a few options depending on how your truck is configured. I have linked the main page for your truck. For example if you have an 8 foot bed without any board or step...
view full answer... - What Do I Need To Mount A Camper On My 2001 Ford F-250 Super Duty Short BedIf your truck comes with a factory hitch without a running board, you will need these two items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF2007 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLF3001 If your truck comes with a factory hitch with running boards under the bed, you will need these items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF4007 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLF3001 The second...
view full answer... - Rear Torklift Truck Bed Camper Tie Downs for 2001 Ford F350 With Factory HitchAlthough the # TLT3303 tie-downs aren't a fit for your 2001 Ford F350, we do have a rear tie down fit that's compatible with a factory hitch. For a steel tie-down, use # TLF3001 or # TLF3001A for an aluminum/stainless tie down.
view full answer... - How Do the Rear Camper Tie Downs for a 2004 F-250 Super Duty Install in the Trailer HitchThe 2-1/2 inch opening is not going to be a problem. The rear tie downs, # TLF3001, come with a sleeve that fits around the outer tube and inside of the open ends of the hitch on the truck. With the sleeve on the width of the outer tube becomes 2-1/2 inches. I pulled # TLF3001 to confirm this. There would be minimal space between the outer tube sleeve and the inner part of the hitch tube. On the bracket from the center of that bolt that faces rearward to the end of the tube is 6 inches....
view full answer... - Camper-Tie Down Kit For 2002 Ford F-350 Long Bed DuallyWe do have a complete camper tie-down kit for your 2002 Ford F-350 dually long bed without running boards under the truck bed, and what you need is the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2011 - Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3001 Along with these tie-downs you will also need turnbuckles to secure them, the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Camper Tie-Downs # TLS9529-2-LK. And because your F-350 is a...
view full answer... - Which Torklift Tie Downs Fit 1999 Ford F-250 Long BedFor your 1999 Ford F-250 long bed with a factory hitch the Torklift camper tie downs you need are the part numbers # TLF4006 and # TLF3001 and you'd be set.
view full answer... - Torklift Tie Downs and Happijac Turnbuckles for 1999 Ford F-350The Torklift Camper Tie Downs part # TLF2011 and # TLF3001 are a confirmed fit for your 1999 Ford F-350 long bed without boards and a factory hitch. The HappiJac turnbuckles part # LC182895 would work great with these as well.
view full answer... - Compatibility of TorkLift Camper Tie-Downs Since your F-250's hitch was installed after it left the factory it could potentially be either a factory hitch or an aftermarket hitch. There should be a safety sticker on the hitch that indicates its capacities and also its manufacturer. If there is no such sticker on your hitch, nor any identification for brand (Curt, Draw-Tite, Hidden Hitch) nor a part number, then chances are its the OEM version. If you have a non-Torklift aftermarket hitch the tie downs you can use are part # TLF2011...
view full answer... - Torklift Camper Tie Downs that Fit 1999 Ford F-250 Long Bed with Running Boards and Factory HitchThe correct Torklift Tie Downs you'd need for your 1999 Ford F-250 long bed, with running boards and a factory hitch is the part # TLF4006 and # TLF3001.
view full answer... - Installation Help for Truck Bed Camper on to My 1999 Ford F-250From my research I found that the recommended clearance between your truck cab and the overhang of your truck bed camper is at least 1 1/2". You can put something in the bed of your truck to raise the camper, the idea I like the best is the high density foam insulating board. This will give some added height and will not be heavy to move around. You can pick those up at your local hardware store. Once you put a piece or two of the foam boards in the bed of your truck, you will be able...
view full answer... - Stake Pocket Mounted Camper Tie Down on 2002 Ford F-250 According to Brophy the Stake Pocket Mounted Camper Tie Downs # TDSF will fit most all pickup trucks up to 2010 model years. As there is no exact fitment guide I recommend verifying the measurements with your 2002 Ford F-250 to ensure proper fit. The stake length is 5-1/2" x 1-7/8" wide and 1-5/8" deep. It will extend out 3" from the stake pocket before flaring out to ensure that your fenders are not to wide. This product is also not recommended to be used if your camper is more than...
view full answer... - Recommended Camper Tie-Downs For 2000 Ford F-350 DuallyFor your 2000 Ford F-350 Super Duty, I suggest the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLF4006 for the front. And for the rear, the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLF3001. You will need turnbuckles too, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs, # TLS9529-2-LK. I like the quick-release levers on these turnbuckles that make it fast and easy to secure your truck bed camper. Please note the linked product review and...
view full answer... - Recommended TorkLift Custom Camper Tie-Downs for 2001 Ford F-350We have a nice selection of TorkLift Custom Frame-Mounted Camper Tie-Downs designed to fit your 2001 Ford-350, however the particular front tie-downs you need will depend on your exact model and what it is equipped with. For example, if your F-350 with the 8 foot bed features a board or step underneath the truck bed and the factory trailer hitch, you will need the Camper Tie-Downs # TLF4006 for the front. If you find you also need the rear tie-downs, you will use part # TLF3001. I have...
view full answer...
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Adam R
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
Test Fit:
Jesse B
Video by:
Daniel D
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim R.
4/24/2015
Ive put over a thousand miles on the truck and camper last season. My etrailer purchase of the torklift product continues to be a reliable system of box-camper stability.