To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re logging long miles with a camper, you need gear that keeps everything steady. These TorkLift tie-downs mount directly to your truck’s frame—the strongest part of the chassis—so your camper weight is evenly distributed and the center of gravity stays low. That means less sway, better handling, and a solid, planted ride even on crosswind-heavy highways or rough terrain.
These tie-downs bolt straight onto pre-existing holes in your frame so there’s little to no drilling or modification needed. The brackets mount tight to the frame for a clean, custom fit with minimal loss of ground clearance. It’s a simple bolt-on install that keeps your truck’s strength intact and gets you on the road faster.
Durability matters when your setup faces weather, road grime, and tough use. The tie-down arms are made from rustproof aluminum and the receiver brackets from stainless steel. A high-impact powder coat finish adds another layer of protection, so corrosion won’t be an issue after years of travel.
When you’re not hauling, remove the tie-down arms and the brackets practically disappear under the truck. They stay tucked up close to the frame so there’s no bulky hardware hanging down. Your truck keeps its clean look while staying ready for your next camping run.
Each arm offers two pin holes so you can extend it just enough to clear sidewalls or fenders while keeping perfect tension on your turnbuckles (sold separately). With two anchor holes on each tie-down plate, you can fine-tune the angles for a solid hold that keeps your camper locked in place mile after mile.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Torklift Talon custom front camper tie-down. This is going to provide the attachment points at the front of your truck bed to help secure your truck bed camper's turnbuckle. It'll just fit into these slots here to give you that tie-down point, so that you can make sure that your camper is gonna be nice and steady. Now, this is just the front two tie-downs.
You will also need the rear tie-downs. Those are sold separately, but you can find 'em here at etrailer.com. Now, these are going to be a custom fit for your 2019 and 2020 Ram 2500, either the 6 1/2-foot bed option or the crew cab with the 8-foot bed. These will also work with the 2019 and newer Ram 3500. All models will need a factory-installed hitch, isn't guaranteed to work with your aftermarket hitches.
Likewise, it may not work with some of your aftermarket boards or steps, so for that 3500, you will need the factory electric board under the cab or without a board or step for that 3500. These are a frame-mounted bracket, so they are gonna fit right to your truck frame. You're not gonna lose any ground clearance. And it being mounted to the truck's frame is going to ensure excellent handling for you. It securing to the base instead of up on the bed is going to help better distribute the weight of your camper to help keep the whole setup from being too top-heavy.
It's gonna make it a lot more secure and stable for you. They do include very detailed instructions to walk you through the installation process. You can see you've got images there to help you conceptualize and make sure that you're putting everything in the right place. So very detailed instructions make it very easy to get this installed. And of course, all of your hardware is included as well.
So we do have the rustproof and very lightweight aluminum alloy tie-down inserts that secure to your durable stainless steel receiver brackets. These just slide right in place there. So you can see, we've got two different holes that the pins will go through. So if your camper is a little bit wider, you'd use this first hole here to have that tie-down point stick out a little bit farther. If your camper is a little narrower, you can slide it in to that inner hole there. I mean, we'll just use the included pins, slide that through. That's going to secure it in place, give you that nice sturdy connection point there for your turnbuckles. And when you're not using your truck camper, you can just pull that pin out, remove that tie down insert, and then you've got a cap here that you can put over that opening. And these are going to be so close to your frame that you're really not gonna be able to see them. They're gonna be very discreet, so it's not gonna take away from the look of your truck at all. So unlike some of your other tie-down options that are always there, kind of an eyesore, these are gonna be really nice in that you can just pull that out. These are very easy to store under bench seat or in your camper, not gonna be too heavy or bulky, be very easy to store away. And then, this is gonna be a nice, finished look there on your truck's frame, so you're really not gonna see it whatsoever. Just pull that cap off, slide your tie-down attachment and put that pin in and you'll be ready to put or hook up your camper. So really nice option here. I really like this Torklift Talon system. It is made here in the USA, so you can trust it's made to the high-quality standards that we've come to know and trust for products that are made here in the US. It also comes with a lifetime warranty, so if you we're to have any problems with it, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers to make sure you're getting good quality products and having a good experience. So in my mind, this is kind of the premium option for your truck camper tie-downs. Again, this is vehicle specific, so make sure that you're getting the right ones for you. But this is the way to go in my mind, just being able to remove those, give you that factory look on your truck again. This is gonna be a great system. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Ratings & Reviews
Lazer S.
9/16/2025
It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?
Paul
9/27/2026
These tie downs are great, so easy to use. Camper never budged a hair
Andrew N.
9/27/2026
Kate F.
8/10/2026
Thanks for the pictures Rich. We will be reaching out =)
Bob
11/1/2025
I have not had any issues at all with the tie downs.
Heather A.
4/10/2026
Looks great! What kind of camper do you have?
Lazer S.
10/14/2025
Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.
Lazer S.
10/14/2025
Clay
7/31/2026
A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.
Christopher H.
7/31/2026
Kate F.
6/5/2026
Great set-up Viviana!! Glad to see you went with the best =) Where did you go for your first trip?
Nick S.
1/12/2026
I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?
Kate F.
8/20/2026
We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?
Gwendolyn Y.
9/18/2025
Install looks great, Dale! Where're you headed off to now?
Gwendolyn Y.
10/1/2025
Kate F.
6/5/2026
I am happy to see you went with the best ThatDennis =) Have you been able to get out for your first trip?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Straw
8/24/2026
A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !