Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier
(107 reviews)
Price: $48.79
In Stock
Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier
Item # CC-125
Retail:$54.96
Our Price: $48.79
You Save: 11%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (107)
- Q & A (0)
- Videos (2)
- Photos
Stromberg Carlson Accessories and Parts - CC-125
- Hitch Cargo Carrier
- Flat Carrier Parts
- Bike Carrier
- Stromberg Carlson
Convert your hitch-mounted cargo carrier (CC-100 - sold separately) to a platform-style, 2-bike rack with this adapter. Front and rear bike wheels slip into the included wheel hoops, and 2 tie-down straps help to keep bikes in place during transit.
Features:
- Instantly converts your Stromberg Carlson hitch-mounted cargo carrier (CC-100 - sold separately) into a platform-style bike carrier
- Holds up to 2 bicycles while still leaving room for other gear
- 4 Wheel hoops support your bikes on the cargo-carrier platform
- 2 Nylon tie-down straps secure bikes to carrier during travel
- Simple installation with included hardware - just bolt wheel hoops to mesh floor of cargo carrier
- Black powder coated steel resists rust and corrosion
Specs:
- Fits: bike tires up to 2-1/4" wide
- Mounting bracket dimensions: 8-1/4" long x 2" wide
- Overall height above mounting point: 11-1/2"
- 1-Year warranty
CC-125 Stromberg Carlson Bike Rack for Cargo Caddy - Black
California residents: click here
Video of Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Hitch Mounted Cargo Carrier Bike Rack Adapter Review
Ola neighbors, it's Brad here at etrailer, and today we're taking a look at a bike rack adapter for the Stromberg Carlson Cargo Carrier. Having a cargo carrier for your vehicle is a great, universal tool that can allow you to put a lot of different things on it. One of those things is generally not bicycles as there's no way to mount them on here, well, this bike adapter changes that. You're able to put two bikes on here and with a cargo capacity of 500 pounds, it can be a heavy ebike, it can be pretty much whatever size you need assuming that the wheelbase fits in the cargo carrier itself. The bike adapter for the cargo carrier will accept up to two and a quarter inch wide tires, so that might not allow you to have your fat tire bikes on here, or some chunkier mountain bike tires that go over that two and a quarter inch measurement. So as you can see, I have a standard mountain bike here, as well as a road bike, and it's able to adjust to both of those perfectly.
Also, the fact that this is mounted to your own custom wheel base on your bike means that you can put women's bikes or children's bikes on here with no problem. Having a cargo carrier is great because you can carry cargo obviously, having a bike rack allows you to carry a bike, but most times you can't do both, that's not the case here. We have both of our bikes loaded up, and we also have our cargo loaded. We also still have space on both sides to add a few more little parcels of cargo if you need to. The cargo carrier does have a weight capacity of 500 pounds, so just make sure you have the weight of your bikes and also weigh your cargo if you're gonna load that up.
So the straps are included in the kit and with the available mounting holes on the frame itself, you can find a bunch of different spots to make sure you have a secure connection. With both of these hoops and the strap wrapped around this, you can see the bikes pretty sturdy. Now, I wouldn't want to use this on a carbon fiber frame just because you are mounting to the frame for that extra stability, but other than that, it should hold your bike in place quite well once these are cinched down. The hardware is included and you can really mount this pretty much anywhere in this mesh area, assuming that you are adjusting it to the wheelbase. Now with that, once you have it set and dialed in for a specific bike, you will have to remove the hardware and move it to account for a different wheelbase when putting a different bike on there.
But if you're like me, I kind of ride my same bikes over and over so once I set it to my bikes, it should be good to go. So now that we've gone through some of the features of the bike adapter for the cargo carrier, I want to take it out on our test course and see how it actually acts when hitting some bumps and doing some evasive maneuvering. So through the test course, I was checking my rear view mirror to see if we had any sway. So we're going over a series of bumps, to simulate rough riding, or off-road trails, we also do some of these of maneuvering that you might encounter during unpredictable driving. Now, looking at the bikes in the rear, I can see the sway is very minimal, in fact, it is a platform style with the cargo carrier attachment, so, you have a lot more stability compared to a hanging style rack.
I really do like the fact that the bikes are stayed in place and I didn't have to worry about them falling or hitting each other. So the bikes on the cargo carrier itself hold very sturdy, the only issue I really had was the wobbling of the rack itself. So, side to side action, you can see it moves in the actual receiver itself. If you want a little more stability to hold that firm, you can add a anti-rattle device that we do have here etrailer. With the bikes off the carrier itself, you can see the attachments for the bike rack. Now, we did have to custom fit it to each bike, as we said, so you can see that the mountain bikes wheelbase was slightly different. The tire was larger here so this had to sit back, which in turn, put this further back. So, as long as your wheelbase is in between that 60 inches, you should be good. Now it does fit on the inside, and I did notice that it did kinda wanna sit against the frame of one of the bikes. That is something to keep in mind as overtime, this may rub against it and cause some scratching on the bottom of your frame. So that's something you might wanna check out, is measure where your frame is. And you'll still be able to get a secure hold as the tires sit in there, but it did sit against the frame. With your bikes off the rack, it's great because you can still access your rear cargo. And speaking of cargo, we still have all this cargo that needs to go somewhere. Now, these hoops are in the way kind of, but you can still load this all up and we'll go on and do that real quick. And you can actually use these to kind of hold your bags in place. During the week, I like to ride my bike, so I have my bike rack attached to the car. Sometimes during the weekend, I'll either go camping, or I'll have house projects, and I need to carry stuff in my car. Swapping out my accessories is kind of a pain, but as you can see, we still have our bike rack attachments here, and we're still able to get the same amount of cargo as before without the bike adapters. So that's a huge added benefit, you're getting the plus of a cargo carrier and your bike rack in one. And that was the look at the bike rack adaptor for the Stromberg Carlson Cargo Carrier, thanks for watching..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not fit
Customer Reviews
Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier - CC-125
Average Customer Rating: 4.7 out of 5 stars (107 Customer Reviews)
Convert your hitch-mounted cargo carrier (CC-100 - sold separately) to a platform-style, 2-bike rack with this adapter. Front and rear bike wheels slip into the included wheel hoops, and 2 tie-down straps help to keep bikes in place during transit.by: Chad F.09/16/2014
I purchased these adapters to use on my Hitch Haul carrier and they fit as advertised. I put my sons 26" MTB on and everything worked and was very stable with the provided strap. I put my 29" MTB on and it was a whole different issue. Due to the size of the bike and tires it was just not a good and stable match. First the carrier is the standard 60" width but i had issues getting the tires to sit on the grate, i notched the ends so it would fit with no rubbing. That is not an issue with the adapters though. Second they do not come up enough to provide enough stability support for a 29" wheel. Both those issues coupled with the fact that even with them secured properly they still have flex due to being mounted to the grate. Over alll it is a great idea and would work great for a 26" bike, but would not recommend for a 29". etrailer has great prices and fast shipping so i will be defiantly ordering my next rack from them.
by: Ramona02/22/2015
I bought these to use on an existing cargo hauler. The quality of the brackets is top notch. My existing cargo hauler is a cheap Harbor Freight hand-me-down but I already have 2 other bike carriers, I wanted this for a different option. So my bikes wobble a bit (the expanded metal on my hauler isn't very stout, but that is no reflection on the brackets. I am THRILLED to have a drop in bike carrier. My cargo hauler has been set up with turn signals and brakes, so I like that extra "don't hit my bikes!" factor and why I wanted this option. I am so glad that these were available to buy without having to buy the cargo hauler too.
We didn't like just having washers, and again because the expanded metal is not a very heavy gauge on mine, we decided to add some longer brackets on the bottom to keep it from pulling through the expanded metal.
I am very happy, this is exactly what I was wanting and by being able to order just the brackets it made it very affordable for me. Thanks!
by: Cliff L09/13/2019
After looking online for a week your product turned out to be the best fit for me. Our camper has a area up front made for storage or in this case a bike rack. Installation took about 25 minutes with most of the time trying to determine where to mount the brackets to fit our bikes. I did add a metal plate on the bottom just to reinforce the stability of wire screen. Attached are our bikes ready to hit the road safe and sound.
by: Gary A.06/24/2013
Mounted easily to my 60" X 20" hitch mounted cargo carrier to carry 2 bikes. I did mount the inside loops in the opposite direction so they wouldn't rub the fenders on my grandson's bike. The bike is just as secure with the loops mounted this way.
by: Illinois rider09/24/2016
Made very well and easy to install
They went out of their way to rush my order thru in time for the daily pickup to ensure I received this before the weekend. Enjoy the easy loading and the flexibility to use my carrier for multiple purposes. For this reason I replaced the locknuts with wing nuts and lock washers
I only used one bike set but may install the second later.
by: Erik09/04/2020
Added these to the back of our RV platform. They work great and are very sturdy (more than expected) I used fork mounts for the front and I used a mounting strap underneath for added strength. Love the way it worked out.
by: Jeff B.08/10/2016
This bike rack is great. It is easy to install if you place the back rack first allowing the bike to stand on it's own, then attach the front. If you have someone to hold the bike, that will make the installation even easier.
The rack works great. We just completed a trip with two bikes, on the rack, on the back of our 32 foot trailer. With bumps in the road, they stood fast and didn't loosen at all, even with the beating they received at the back end of the trailer. I think you would be completely satisfied with this product.
by: Ray T Hock Jr09/01/2019
I purchased the CC-100 cargo carrier and the CC-125 adaptors to convert it into a bike rack. They worked fine with the following exceptions:
1. The straps that came with the CC-125 were not effective at holding our bikes on the carrier. They kept loosening on their own during travel. I would not trust them. I used ratchet straps instead.
2. The washers that were sent to secure the CC-125 arms to the CC-100 are too small for the holes in the diamond screen. A rectangular piece of metal with holes would have worked better. The washers tend to bend the diamond screen when you tighten the securing nuts. They then can possibly push through the diamond screen during transit. If this happens you may lose your bike. I plan to either purchase 8 larger washers or have 4 sets of rectangular plates made for securing the bike tire holders.
by: Richard L11/07/2013
First, I was surprised and thrilled that my order was upgraded on the shipment and arrived so quickly! We were able to participate in a planned ride and did not have to lay the bikes in the back of my truck. Our closest trailhead is approximately 15 miles!
The install on my cargo rack was easy and done in less than 15 minutes. The travel to the ride was excellent with no shifting of the bikes.
I am thrilled! Will try to send pics, but have had some trouble uploading them! Thank you for your promptness and service!
by: Ben09/27/2013
Great product and price. I installed mine on an old cargo carrier I already owned. I had to do the opposite direction then suggested because my road bike would have had the crank set rubbing, it is a bike issue not a product issue. Still works fantastic. The shipping was fast and etrailer's communication was great.
by: John B07/17/2013
rarely does a product work out this well for me. needed a bike carrier that was robust enough for two electric bikes (85 lbs each) this and a cargo carrier was just right and cost half what the lighter constructed pre-made carriers cost.
by: Pete R.06/22/2014
The product was what I expected and just what I wanted to help make a flat bed trailer into a trike hauler. So my use wasn't exactly what the manufacturer had intended, but pretty close. I used two for each trike and then strapped the trikes down.
by: JW09/10/2020
The bike rack was exactly what I had expected. It came in a timely fashion and installed easily. This is a great solution if you don't want to buy a whole other rack and have it laying around the house. There is also still a little room to carry other items along with the bikes.
Jw
9/10/2021
I used the bike rack to take my mountain bike across country to Montana. The bike remained rock solid in the rack along with my camp kitchen, jerry cans, and cooler on the hitch carrier. I am absolutely pleased with this product one year out.
by: Steve B02/02/2017
Great for holding bikes on our bike rack on our travel trailer. A great solution for what I needed as the bike rack just had one vertical post to anchor bikes. Etrailer.com was great to work with fast shipping and a good price!
Steve B.
2/5/2018
We used the bike holders to carry our bikes on our travel trailer bike rack last fall on a 4 week trip. The bikes were held in place for over 2500 miles. Quite pleased!
by: Jonathan 10/03/2022
Worked as advertised on my expanded metal cargo carrier.
by: Scott03/30/2022
This was to have tie down straps included. The straps were not in the box!
Jenny N.
4/6/2022
I will have our Customer Service team reach out to you.
by: Shannon07/07/2016
Product arrived quickly. We took a previous recommendation and secured the bike holders to the hitch haul using wing nuts (for easy removal). This allowed us to use what we already had, not spend a lot of money and have to store a bike carrier.
The product has performed above our expectations. We use bugees and (not the included straps) secure our bikes to the hitch haul with a lock.
by: Leland 01/18/2022
I used these with a Lippert Cargo Systems on my fifth wheel bumper. The bike load easily, fit well, and ride securely with velcro straps at the bottoms of the wheels.
by: Greg P08/15/2016
I ordered this item, along with CC-100 to use as a bike rack on the back of my travel trailer. Once I assembled the cargo carrier, adding these to it was pretty straightforward and seems like it will be a good solution for my needs.
My only complaint is the straps that came with this. I could see no way to sufficiently tighten them, and would not feel safe carrying my bikes with those straps. I did try using them, and just driving the bikes through my neighborhood, they worked loose.
So my recommendation to Etrailer would be to perhaps include better straps with this product and charge a little more. Because before I can actually feel safe using this product for it's intended purpose, I'm going to have to buy better straps anyway.
by: Mike B.07/31/2015
I bought these along with a Curt Cargo Carrier. They arrived very quickly and were a breeze to install onto the carrier. I was able to fit three bike (one a smaller child's bike) without much trouble. The only thing I did have to do (and I knew this going in) was remove the front tire from my bike and use a fork mount instead of one of these tire mounts. The wheel base of my bike is greater than the 60" width of the Curt Cargo Carrier. The provided straps are also a little weak. The hooks were not large enough to go around the frame of the carrier. I replaced them with some ratchet straps that I already owned. After getting them set up, I took a quick trip out to Target and they stood up fine. I will try to do another review after my trip to the NC coast next week and will hopefully be able to give it an excellent rating after a true test. See attached pics of my set up.
by: Stuart06/11/2022
We use these on the back platform of our travel trailer to hold our two e bikes ( which are heavy) and they perform well.
by: Clayton07/17/2018
Very good and easy to bolt on to a haul hitch cargo carrier like I have and transport bicycles. And if you don't want to have them on your haul hitch cargo carrier, they remove easily and store away easily.
by: Bob Parker06/15/2015
Delivery of the bike rack adapter was very quick. Installation of this product onto my cargo carrier was very fast and easy. Now when we take our bikes on RV trips, it is a breeze to unload and reload our bikes onto the carrier. This product seems to be very durable and is a pleasure to use!
by: Lisa B06/03/2014
LOVE IT ! ! ! !
My husband is BIG on DIY and had an idea of how to make his own attachment to our cargo carrier for bikes. I thought this was such a good idea that I would make sure it wasnt already available. Sure enough... there it was. A very simple and inexpensive (dollars and time) solution. Installed in minutes and we were riding bikes within an hour.
We used these brackets for our two 26" bikes. We spread the brackets out as far as possible on the rack and that allowed us just enough room to squeze our daughters 20" bike in the middle.
by: Phil04/15/2015
The Bike Rack Adapter is an overall great product, the straps however are not, I highly recommend heading to your local auto store and buying real tie down straps. the strap held the first trip, the second it didn't hold at all and as tight as I could make them they continued to become undone while driving.
25
107
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- What are the Dimensions of the Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo CarrierI went out to the warehouse to measure the overall height of the bike rack adapters, # CC-125. The overall height from the bottom of the basket is 10-5/8 inches. I took some other measurements as well: Inside height is 10-1/8 inches Inside width is 2-5/16 inches Overall width is 3-1/16 inches
view full answer...
- Maximum Tire Width for Stromberg Carlson Bike Rack Adapter # CC-125The Stromberg Carlson Bike Rack Adapter # CC-125 referenced in your question includes 4 wheel hoops that have an inside width of 2-5/16 inches, meaning they will work with wheels that are up to 2-5/16 inches wide. This adapter will allow you to convert your Stromberg Carlson Cargo Carrier # CC-100 into a platform-style bike carrier. It can hold up to 2 bikes while still leaving room for additional cargo. All of the necessary hardware is included. I have attached a short video demonstration...
view full answer... - Using Stromberg Carlson Bike Adapters on an Oxgord Hitch Mount Cargo CarrierTo use the Stromberg Carlson Bike Adapters, your carrier will need to have the available wheel base for your bikes, and also holes in its mesh that are roughly 5-1/2 inches apart center to center to properly mount the bike adapter plates into the carrier's floor.
view full answer... - Inside Width and Outside Height of the Bike Rack Adapter # CC-125I went out to the warehouse and found that the Bike Rack Adapter # CC-125 that you referenced has an inside to inside measurement where your tire will sit is just under 2-1/2 inches. From the ground to the top of the wheel mount measured about 11 inches. I have attached a photo for demonstration.
view full answer...
- Will the Stromberg Carlson Adapter, Part # CC-125 Fit Stromberg Carlson Cargo CarrierThe Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier, part # CC-125, you referenced should have no problem fitting on the Stromberg Carlson Cargo Carrier, part # CC-100 . Please keep in mind the wheelbase of the bike needs to be considered when placing the adapters on the carrier. They can be attached easily with the included hardware. I have linked you to the product review of the adapter.
view full answer... - Bike Rack Adapter Recommendation for a HitchCargo CarrierIf your Valley cargo carrier has a mesh floor then most likely the part # CC-125 would work well, but since it hasn't been tested I can't safely guarantee it would work and that the floor of the carrier wouldn't bend from the weight of the bikes. The only safe way I can recommend you use the # CC-125 would be to get the cargo carrier part # CC-100.
view full answer... - Does the Stromberg Carlson Bike Rack Adapter # CC-125 Have a Weight CapacityThe Stromberg Carlson Bike Rack Adapter # CC-125 referenced in your question does not itself have a weight capacity. You will simply need to follow the weight capacity on the Stromberg Carlson Cargo Carrier # CC-100 that the adapter is used on, which is 500 pounds, or the tongue weight capacity of your vehicle's trailer hitch - whichever limit is lower. This is a really nice product that will convert your cargo carrier to a platform-style bike rack, capable of securing up to two bikes....
view full answer... - How to Carry 2 Bikes on the Stromberg-Carlson Trailer Hitch Mounted Cargo CarrierThe bikes were secured to the cargo carrier # CC-100 using the optional add-on adapter # CC-125 and the straps that come with it. These wheel loops bolt to the deck of the carrier. I have included a link to the video that shows how it works.
view full answer... - Is the Rola Dart Bike Carrier Rear Wheel Tie-Down Available Separately?The Rola Dart Clamp-On Fork Mount Bike Carrier for Railed Cargo Carriers # 59904 does not offer just the rear wheel tie downs as a replacement part. You will either need to replace the entire kit or go with a different option. For instance, you can use the Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier # CC-125 to wrap around the carrier and secure the wheel.
view full answer... - Recommended Bike Carrier that is Compatible with Pro Series Hitch Cargo CarrierThe Pro Series Hitch Cargo Carrier does not come with a bike carrier attachment. However, you could use a Bike Rack Adapter for Hitch Mounted Cargo Carriers like part # CC-125 to transport your bikes. The Pro Series cargo carrier which you reference weighs 47 pounds. You must factor in the weight of the bike rack adapter and your bikes. You also need to check your vehicle maximum tongue weight rating and use the lowest maximum rating of the vehicle, hitch or cargo carrier as the weight...
view full answer... - Stromberg Carlson # CC-125 Bike Rack Adapter for Cargo CarrierI did some research on the Highland carrier you mentioned. We don't carry that particular model, but we do have others like the Stromberg Carlson # CC-100 that are pretty similar. Although the # CC-125 is meant to be used on the # CC-100 cargo carrier, I see no reason why it couldn't be used with the Highland carrier you referenced. If you click the provided link, you can see a video showing the # CC-125 being installed.
view full answer... - Availability of Hitch-mount Enclosed Cargo Carrier with Integrated Bike RackWe do offer a range of hitch-mount cargo carriers, including both tray and enclosed types, and while some of the tray-style units can be fitted with add-on bike racks, such as the Stromberg Carlson Cargo Carrier for 2-Inch Hitches # CC-100 with bike carrier # CC-125, none of the enclosed carriers we offer can accept a bike rack. If you can advise the year/make/model/version of your vehicle I will be glad to see what options we can offer you in hitch- and roof-mount cargo solutions. Your...
view full answer... - Bike Carrier Accessory for Use on Hitch Cargo CarrierWe do offer bolt-on bike carrier accessory kits that can be attached to a hitch cargo carrier like the Reese carrier # 63153. Stromberg Carlson makes their Bike Rack Adapter kit # CC-125 which bolts on to the carrier mesh deck surface to provide transport for two bikes. It is made to attach to the Stromberg Carlson Cargo Carrier # CC-100.
view full answer... - Cargo Carrier That Can be Used for Hauling BikesI recommend is Stromberg Carlson 23x59 Cargo Carrier, part # CC-100. It has a weight capacity of 500 lbs, and offers bike adapter # CC-125 that will carry 2 bikes. I have attached a link to a product review video for this carrier. This adapter comes with four wheel hoops and a pair of tie-down straps to keep your bikes secure while on the carrier, as you can see in the accompanying photo. I have added links to video reviews of the carrier and adapter for you to take a look at.
view full answer...
- Cargo Carrier With Bike Rack for Use on 2012 Toyota HighlanderI have a carrier by Stromberg Carlson 23x59 Cargo Carrier, part # CC-100. It has a weight capacity of 500 lbs, and offers bike adapter # CC-125 that will carry 2 bikes. While it doesn't fold, you could add or remove the bike adapter as needed. I have attached a link to a product review video for this carrier.
view full answer... - Will Stromberg Carlson Bike Rack Adapter CC-125 Fit Other Brands of Hitch Cargo CarrierThe Stromberg Carlson Bike Rack Adapter for cargo carriers # CC-125 is designed to work with their own 23 x 60-inch cargo carrier # CC-100 but it absolutely can work just fine on other brands and sizes of hitch carrier, such as the Reese 20 x 47-inch carrier # 63155. Just keep in mind that the cargo carrier's dimensions will limit the size of the bikes that will fit.
view full answer... - Cargo Carrier With Bike Carrier Recommendation For 2014 Ford ExplorerWe do offer a hitch-mounted cargo carrier that will work for your 2014 Ford Explorer. Although it does not have bike carriers attached, we do offer fork-mount clamp-on carriers for cargo carriers that may work for you. I recommend is Stromberg Carlson 23x59 Cargo Carrier, part # CC-100. It has a weight capacity of 500 lbs, and offers bike adapter # CC-125 that will carry 2 bikes. I have attached a link to a product review video for this carrier. We do not offer the carrier you mentioned.
view full answer... - Recommended Cargo Carrier and Bike Adapter to Carry Two Bikes on Rear of Travel TrailerI don't recommend using a folding carrier on the rear of a travel trailer, and here's why. Due to the stiffer suspension and the long rear overhang (distance between the rear axle and the back bumper) any accessory installed in a hitch at the rear of a travel trailer will be subjected to much more severe bouncing and jarring forces than would be experienced if the accessory were installed in a hitch on a passenger vehicle. The folding portion of the carrier is a likely failure point, which...
view full answer... - How Tall are the Bike Rack Adapters # CC-125The Bike Rack Adapters # CC-125 sit about 11 inches off of the ground. These adapters may be compatible with other cargo carriers but they were designed to work with the 23x60 Stromberg Carlson Cargo Carrier # CC-100 which cannot fold. Unless the shank on your carrier allows the base to sit further away than 11 inches your better bet would be to go with a bike rack. A great cost effective bike rack that would work well for your application is the Curt # C18085 2-bike rack. This bike rack...
view full answer... - Does Stromberg Carlson Bike Rack Adapter Kit CC-125 Include Mounting Hardware & Bike StrapsMounting hardware comes with the Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier, item # CC-125, so you do not have to supply it on your own. It also includes two adjustable nylon straps to secure your bikes. This unique item offers a cost-effective conversion of a hitch-mount cargo carrier like # CC-100 into a platform-style bike rack and still allows you to retain use of the cargo carrier when needed simply by undoing a few bits of hardware. If you'd like to add...
view full answer... - Solution to Carry Small Motorcycle and Two Bikes with Trailer HitchYour best option for carrying your Trail 90 and a couple bikes would be with the cargo carrier # CC-100 and the bike rack adapter that fits this carrier part # CC-125. It wouldn't be a super elegant setup but the cargo carrier has the capacity and room for the motorcycle and then with the bike rack adapters you'd be able to secure the bikes as well.
view full answer... - Availability of Add-On Bike Rack for Use on Hitch Mount Cargo CarrierWe do offer an add-on accessory bike carrier from that can be added to a hitch-mount cargo basket # CC-100. The Stromberg Carlson bike carrier # CC-125 converts the cargo basket # CC-100 into a platform style, 2-bike carrier. The front and rear bike wheels slop into the wheel hoops and it comes with 2 tie-down straps to secure the bikes. Please refer to the linked video for more on this accessory carrier.
view full answer... - Can the Bike Rack Adapter # CC-125 Carry a Road BikeYes, the Bike Rack Adapter # CC-125 that you referenced is compatible with road bikes as you can see from the attached video of when we did a test fit. This bike rack adapter is meant to be used with the 23x60 Stromberg Carlson Cargo Carrier # CC-100 that works with 2 inch trailer hitch receivers. I also recommend utilizing a cable lock like part # e98891 to help deter theft of your bikes. You can secure it to your vehicle by running it through the security chain loops on your trailer hitch.
view full answer... - Can Stromberg Carlson Bike Rack Adapter CC-125 Be Used with e-Bikes The Stromberg Carlson Bike Rack Adapter # CC-125 that you referenced does not have a specific weight capacity, so it's really only limited by the capacity of the cargo carrier you're using it on. This means as long as your particular cargo carrier is rated to safely support the combined weight of our two e-bikes the Bike Adapter will work well. These wheel hoops are designed to fit the 500 pound capacity Stromberg Carlson # CC-100 but it's universal design allows it to be used with most...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Leah B
Updated by:
Mike S
Video by:
Zack K
Video by:
Patrick B
Video by:
Dustin K
Edited by:
Frances L
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Installed by:
Rick A
Installed by:
Bradley B
Test Fit:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ray J.
9/5/2020
Works great on both my Chevy Silverado and my wife Honda Pilot.