Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Trimmer rack securely transports 2 trimmers or weed wackers in your open utility trailer. 2 Lockable hasps (padlocks sold separately) secure each trimmer individually so that you can remove 1 trimmer at a time. Rack can be easiliy removed from mount.
Features:
Specs:
This rack mounts on your utility trailer so that you can safely transport 2 trimmers.
Simply place your trimmer or Weedeater horizontally in one of the hasp latches, and rest it on the vinyl-coated hook of the opposite tower.
The hasp latches can be secured in place with the included carabiners. Simply replace the 2 carabiners with 2 padlocks (sold separately) to lock your trimmers in place on the rack.
The width of the rack can be easily adjusted. Each upright attaches to the top crossbar. This crossbar has multiple predrilled holes so that you can easily attach the uprights where you want them. Place the uprights closer together for short trimmers, or position them farther apart to hold long trimmers.
Once you set the rack's width, you can install the 2 mounting plates that the bottoms of the uprights attach to. These plates mount on your trailer's floor with the included wood screws.
The uprights clip into the mounting plates with the included snapper pins. Simply replace the snapper pin on each upright with a locking pin (sold separately) to keep the rack locked in place on your trailer. You can quickly unclip (or unlock) each upright to remove the rack from your trailer when it's not in use.
Additional brackets mount on the side rails of your trailer to support the uprights. These brackets easily clamp in place with no drilling required.
Just mount the brackets the same distance apart as the mounting plates, and slide the uprights into them.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today you're going to be getting a look at the lockable, dual trimmer rack for truck bed side rails, and open utility trailers, part number 288-01811. This rack is the perfect addition to your landscaping truck or trailer. It'll hold two trimmers, or weed whackers with the option to secure them with a padlock. You could pick up two padlocks with part number 141T.The lockable hasps secure individually, allowing you to remove one trimmer or weed wacker at a time. Compared to other trimmer racks that permanently installed, this one can be easily removed when not in use. Simply loosen up the set screws on each side, and remove the pins.
Then you can just lift it out of place. If you're not going to be using for a while, you can even remove the side rail brackets. Simply loosen up the clamps, take them off, and it comes right off. The only permanent part of the installation is the base here, it does come with hardware to attach it to you wood trailer. If you're putting it in your truck bed, you will have to provide your own hardware.It does have pre-drilled holes, if you'd like to permanently install the side rail brackets.
You will have to provide your own hardware. It's made out of a sturdy steel construction, with a black powder coat finish. So it's going to stand up the elements, and resist rust and corrosion. The vinyl coated hooks are going to prevent your tools from getting scratched. It's 47 inches tall, and it's adjustable between 18 and 24 inches in width.The mounting holes are an inch apart, giving us four points of adjustability.
Now, loading up your trimmer or weed wacker is easy. You'll want to first, undo you carabiner or padlock, whichever one you'll be using, then we'll lower down the hasp. Then we'll set our head in place. We'll rest it into the cradle. We'll go underneath the keeper, then we'll bring it up in front of the trigger or grip, raise up our hasp.
Close it up. And then insert our carabiner or lock.Here you can see how the hook design is going to prevent it from bouncing out, even over rough terrain. And now you've had a look at the lockable dual trimmer rack for truck bed side rails, and open utility trailers. Part number 288-01811.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews

Ed
8/18/2023
Acceptable. My Stihl trimmers tend to roll over in the cradle and fuel leaks out when full heat expansion. Firm foam or rubber s might prevent this new product stream?.
Do you have a question about this Trimmer Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.















Todd
12/7/2021
same issue...I dont use them due to vibrating upside down