# 1
Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Works well on my side by side to get the ball to a usable reach. The threaded pin makes it difficult to take on and off (can't use a non threaded in). I have to lay on the ground to do this. It does not rattle that is for sure so in an application where that is important, and where you have normal access I am sure it is fine. I simply needed this specific length.
My wife and I purchased a travel trailer a year ago. The tailgate of my truck was too close to the trailer to allow it to open. I purchased the extension from you to eliminate that problem. I purchased this one because it is 2" solid and had a 10k rating.
# 2
Hitch Extender For 2" Trailer Hitch Receiver 7"
I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
# 3
RockyMounts Hitch Extender w/ Hitch Pin and Lock - 2" Hitches - 8" Long
Delivery was fast, packaged very well, and the hitch extension is really well made. It is perfect for getting my bike rack away from my rear door to allow access to the back of my Forester. Impressive construction. I will recommend it to others.
This hitch item not only worked exactly like I needed, but was of superior construction, as it included a unique primary lockpin idea that keeps the extension from wobbling, as well as locking the part to the vehicle receiver. I always get more value than expected on the accessories from etrailer.
# 4
Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
This tow bar extension is a quality built product.. Very helpful backing a trailer.
I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.
# 5
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
This is a very good product. However you need to be careful what vehicle and bike rack that you intend to use with it. My vehicles 2" hitch was not hollow past the end and the hitch extender bottomed in the hitch before the 2nd hole could be lined up and used. So the 2nd hole on the vehicle side was unusable. Then using the Swagman Chinook 2 bike rack I found that the bike rack hitch could not be inserted deep enough into this hitch extender to be able to use the 2nd hole in the extender, on the rack side. With that situation I was not able to use the 2 holes that would get the bike rack installed in the shortest distance from the rear of the. vehicle.
The "Hitch Extender" that I ordered works great. Everytime I go RVing in my Winnebago MH I utilize it. Jerry Barnes
# 6
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.
# 7
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.
# 8
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
Definitely a quality product. Just installed and it's very solid. Fits perfectly on the Torque Lift Hitch
Torklift SuperTruss does not disappoint. Straight forward install, though the manual photos are extremely dark. Use the Torklift YouTube install video if needed. The 48” extension gives me the needed length beyond the TC I was looking for while still allowing 1,200 tongue and 12k overall towing capacity.
# 9
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
As per my last 3 orders here are some pictures of how I received the item along with what was broke or bent. I can fix it but I shouldn’t have to. So I will try elsewhere from now on cant deal with your shipping dept , anymore.
# 10
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 36" Long
I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
At first I was skeptical but now that I’ve put it together I’m very impressed. This thing is heavy duty and pulls my trailer no problem. Korren did a great job helping me out. Excellent customer service.
# 11
Malone 2" Dual Purpose Hitch Receiver
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
I bought this Dual Purpose Receiver at Twice the price of that Big online company because of reviews from owners that bought on both sites. After evaluating the reviews, I chose to go with etrailer because I have come to trust them as a company that gives you a great product that they will stand behind and they appreciate your business. I haven’t used this receiver yet, but can look at it and I am comfortable that I made the right choice. I will follow up with another review after I use it.
# 12
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
The hitch worked great. I pulled a 12ft Wells Cargo enclosed trailer with a motorcycle on board. The reason I purchased this hitch, I have a 101/2 ft Lance camper that extends pass the bumper. I used it on a F350. I did use a Equla-I-Zer sway control hitch because of the tongue weight of my trailer and I believe it made this extension hitch work better.
This is a quality product and works perfectly! Easy to install and adjust. They even give you extra chain and turnbuckles.
What our customers are saying:
"Received order, shipping and service was very fast. Thanks"