# 1
Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
E trailer I have a 2019 Mazda6 and purchased the rhino rack series 2500 parts (fit kit #DK289, foot pack #RRRLKVA, aero crossbars#RRVA126B-2), and the rhino rack snowboard/ski carrier #RR576. My car does have fixed mounting points underneath the strip on the roof so I opted to add them to my roof and not use the clamp for kit that goes in the door jam. Every time I entered the year, make, and model of my car, the parts came up with the clamp fit kit part #DK387 which I did not want. But after some research, I found the correct fixed mounting point fit kit. The site of course told me that this part wouldn’t fit my car but after looking at the customer reviews, I saw them used on Mazdas. All of the rhino rack instructions were not the best. We did have to make some adjustments. One of the instruction packs tells you how long you’re supposed to cut the rubber pieces that go into the crossbars based on your car but unfortunately, the measurements were wrong for my car (picture- front 166mm is wrong). The front bar length was about an inch too short and I had to add more rubber to make it longer to fit the fixed mounting points on my roof. After some time of trying to interpret the instructions, and looking up whatever available instructional videos were online, we finally finished installing them and they do look really nice. At higher speeds on the highway I can definitely hear more noise. The actual snowboard carrier is fine, fits all 4 boards fine. It is a little difficult to close once I have my boards in there because you have to push the top bar all the way down and hold it down to be able to turn the key to lock it. I’m just happy I don’t have to shove the boards in my trunk. I do like that all the parts in this series come with locks and keys. So far no problems. Overall good product.
This rack works great with the four pairs of skis I lugged from Oregon to Alaska. I'm using it on the beef rack cross bars that came with my go fast camper which are very difficult to find mountings for. This one worked great though with a little bit of metal grinding on the bolts that slide into the t-slot of the rack. It locks and unlocks fairly easily (with a little bit of jangling involved), but so far so good!
# 2
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Black
This rack easily fits 5 sets of skis for my family. It is FAIRLY easy to take on and off (could be faster if we didn't have to turn turn turn the dials). My biggest complaint is that as soon as my skis are out of it, I HAVE to remove it from my car (SUV). The noise of it empty on my roof is so loud when I am on the highway it is AWFUL! It's like it vibrates my whole car and is super loud. It only does it when there are no skis in it. It is frustrating since it would be way easier just to leave it on all winter taking my skis on and off when we need to, not the entire rack.
Just put this snowboard rack on my 2011 4runner mounted to Thule Aeroblade roof rack. Easy to install and use. Quality seems good. Like the look. No noise issues when driving. No complaints so far. Overall satisfied!
# 3
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Silver
So easy to install onto Thule AeroBlade. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving. etrailer provided great shipment/notification support and was great resource for how-to videos, commentary.
Better than I expected. Only comes with four core locks so be aware of that if you want six like I did. Bought two more locks from Thule with the same key #. Mounted this carrier on my Rhino Rack. Perfect fit and looks great. Would highly recommend.
# 4
Thule SnowPack Extender Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Silver
Love it!!!!!! Great ski rack replacement for older rack. The extended slide is incredible. The eTrailer support helped me pick the model that worked for my car and crossbars. Another wonderful purchase from my go to source for bike/ski or other related products!
Used this last season for the first time. Found it lightweight and very easy to install; the main difficulty was getting front and back carriers aligned on the center of the vehicle as the clasps are offset. It was used to hold 4 sets of skis and did this quite easily. I think 5 sets would be no problem, but six sets might be pushing it especially if you are using wider skis. It is very much worth the extra money to get the extender/slide out option if you stand under 6' tall and have an SUV.
# 5
Rhino-Rack Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!
The Rhino Rack was easy to put up on a 2018 Subaru Outback. Took me about 10 minutes. The only issue is that the rack bottom bracket piece is is convex with an acute angle which makes it not fit perfectly on the Subaru crossbar that has a flat bottom. Loaded 2 pairs of skis and poles and the rack kept them securely fastened during transport on the highway. There was some noise from the rack during highway driving but it was minimal.
# 6
Yakima FatCat EVO 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Black
Just got my Yakima Fatcat EVO 6 ski carrier (black finish) and I am stoked. Note that this is different than the Fatcat 6 (non-EVO, previous generation) carrier. This is my first ski carrier, but I and/or my kids ski about once a week at Alta and Snowbird when the lifts are running, so I expect it to get lots of use. Etrailer shipping was fast and item was packed in a sturdy secondary box. PROS: 1. I love the sturdy build and quality finish of the carrier. 2. The design allows many micro-adjustments to fit to your vehicle and to fit the skis. For instance the spring-loaded hinge on one end and the lock on the other end can naturally accommodate different thickness skis. 3. Carrier has a usable width (i.e. width of skis side by side) of 32.75 inches (832 mm). For those that are not skiing on 75-mm-wide skis from 30 years ago, this carrier might actually allow you to fit 6 pairs! 4. Separate mounting brackets for aero or for square/circle cross bars. The aero brackets fit securely on my Acura/Honda OEM cross bars. The flat part of your skis will be about 3 inches (76 mm) above your cross bars. 5. A built-in lift bracket that lifts by an additional 3 inches (76 mm) the hinged end of the carrier, if you have really tall bindings (I don't think I'll need to use it). 6. The aero brackets use a rubber coated steel strap to wrap under your cross bars. This strap has a quick release cam on one end that can be operated when the carrier is not key-locked. This means you can remove or install the carrier without tools in about 4 minutes, once you've done the initial install-related tuning. While the carrier seems sturdy enough to leave on the vehicle all winter, I expect I'll only install it on ski days. This feature really sets this model apart and for me was its biggest selling point. 7. Yakima packages the carrier in a nice-looking sturdy cardboard box with a flap lid. I can fit the two parts of the carrier in the box, with the brackets/straps still installed, for convenient storage (see picture). CONS: None so far, though I haven't yet actually hauled skis up the mountain! After this ski season is over and eTrailer asks me for a follow-up review, I'll let you know. I'm also thinking about seeing if the ski carrier can be attached to my small hitch-mounted cargo carrier. That would make loading and unloading the skis easier than on the roof.
First off...you can't beat the service of etrailer.com. I was looking for a ski rack for my son's 2012 Subaru Impreza with the factory roof rack (base model not the sport). I could find no reviews of anybody installing one of these on one of those. I took the plunge and will say that I am very happy with the outcome. The installation is a bit tricky and four hands help, but after the first one was installed we had the hang of it and the second one went on very quickly. Even with the expedited shipping this rack was about $50 cheaper than the Subaru ski rack. Again the etrailer.com service is fantastic. I have purchased products here before and will do so again.
# 7
Thule SnowPack Extender Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Black
Game changer! I don’t have to climb on the car to put our skis on the rack or take them off. It’s also easy to put the rack on the car and take it off. I’m got sure you could get six pairs of skis on the rack, but I haven’t tried. It’s certainly no problem getting four pairs.
I am so thankful I spent the extra money and ordered the one that pulls out to easily load/unload skies. I’ve had several opportunities where I have had 6 pairs of skies to transport. I have had others approach me to see if I would trade.
# 8
Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I actually ended up buying a second set so I can fit a total of 8 pairs of skis on my jeep. I love the quality and ease of installation. It’s an easy to use system and love that my skis are secured.
These are extremely easy and quick to install. Love the aerodynamics of them as well as it's quality craftsmanship. Very pleased with this item and with the delivery speed! From North Shore Oahu....MAHALO
# 9
Rhino-Rack Ski and Fishing Rod Carrier - Locking - 2 Pairs of Skis or 4 Fishing Rods
Last year I purchased Rino ski racks from etrailer and they work great . The hardware fit my roof racks and all the fittings are tight. Ordering was easy. Shipping was fast and I even got a follow up personal email from George a year later asking how I liked them - which was impressive! I would definitely recommend etrailer as an honest and good outdoor gear company!
Great product! I think it's a bit expensive but well worth it. I bought it to transport my fishing poles. So no long rods in my new SUV.
# 10
Yakima FreshTrack 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
Looks great on the vehicle. Had a little struggle tightening onto the cross bars but adapted and overcame!
It's a ski rack so its not all that exciting. I like that it is small for storage reasons when not using it. The fastening system to my Toyota Highlander factory rack is secure but a little cumbersome to apply and take off. I like to take it off when not using it to preserve my gas mileage. The boards and skis fit fine although they are stacked in order to get 4 peoples worth of equipment up there. A small price to pay for their compact size on the roof or in the garage.
# 11
Rhino-Rack Ski and Snowboard Carrier - Locking - 3 Pairs of Skis or 2 Boards
I think these racks will be excellent during ski outings for many years. I attached them directly to the C-grooves on my Aero bars rather than using the provided clamps. The C-groove attachment is stronger and slightly lower profile. I love the large release buttons!.
I can't ski, I fly fish. However my oldest decided to try downhill skiing after being gifted a pair of skis. I am budget minded should the skiing not work out and after breaking many rod tips decided this might solve 2 problem. I am very pleased w/this equipment holder. It has transported skis & ski poles too and from and no longer does my oldest have to dodge skies coming over the back seat. So far it has taken abuse from the rain (& freezing rain), snow, ice, rapid warming, road salt, and upwards of 70mph and there has been no shifting, loosening, breaking of plastic or any other noticeable problems. I am excited for spring to see how it transports my fly rods.
# 12
Yakima FreshTrack 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I love this ski rack and the service I got while making the purchase from etrailer! This rack securely holds up to 4 pair of skis and is super easy to put on and take off of the roof. I would highly recommend this rack to anyone. I would also highly recommend purchasing this product and any other rooftop rack needs from etrailer
We added two more racks to the two we already had on our Jeep. Easy to install and use
# 13
Thule SnowPack Ski and Snowboard Carrier - 4 Pairs of Skis or 2 Boards - Silver
Excellent customer service and tracking. From ordering to delivery, this is the best experience it have ever had with an actual n line order. Highly recommend Looking forward to ordering in the future
Very nice racks perfect for my fishing rods, I like buying from etrailer there are first class company.
# 14
Kuat Grip Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Black
Rack works great. Slide out makes loading and unloading much easier. So far we only put five pairs of fat skis on. Might have room for one more pair if I closed the gap between pairs but we didn’t need six pairs for that trip. Only problem was the rack froze up after driving through fresh rain. We had no problems with freezing while driving through salted slush. So far we’ve used it on two longer ski trips to CO from AZ. It’s quiet and strong. We once had a cheaper rack release our top model, expensive, skis onto the highway at 65 mph. That’s why I bought a Kuat.
These rack are great, I have them on both of my SUVs all winter. The etrailer seevice was excellent as well.
# 15
SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted - 4 Pairs of Skis or 2 Boards
Quite an amazing product. When it arrives, you think, "Oh man, how is this going to make it the whole trip?" But I can tell you that I traveled from Fort Worth to A-basin/Keystone and back with no issues. That's 1640 miles there and back at speeds up to 85 mph and at least 3 of the world's climate zones on just this one trip. It is best practice to give each of the suction plungers a few taps every time you gas up, but I forgot a few times and it still caused no issues. Simple assembly with 4 suction cups and 2 of the high-density plastic racks that connect to each other with an included alan key and headless screw. Also includes the high tension straps you'll need to fasten skis/boards at the front and rear of your gear. When I say this rack was solid, I mean like I'd touch it to test for stability while driving and gassing up and it felt like it was sitting in hardened cement. Absolutely rock solid. And, there's a spare strap and plunger included. A couple minor things worth noting (but none of these could justify taking away from the 5-star rating I gave this product): - The suction cups require a clean surface, so don't take this lightly. I took mine to a car wash right before mounting. - The clean surface must also be smooth and seamless. I didn't notice until I started mounting that my truck has a grooved roof, so I had to put 1 rack on the bed cap roof. It worked great. - I wish there was an option just for skis b/c these racks were about 1" too tall to fit in the garage while mounted to the roof, and it's obvious the height of this product is to also accommodate snowboarders. Like I said, minor stuff. 5-stars all the way. You won't regret it!
Only used them once for a 4 hour drive to the slopes. Transported two snowboards at highway speeds for a majority of the travel. Mounts stayed planted and were still very secure at arrival. Nice to be able to remove to when at destination while traveling around locally.
# 16
Kuat Switch 6 Ski and Snowboard Carrier - 6 Pairs of Skis or 4 Boards
Excellent ski rack. I purchased because I wanted absolutely no noise. This thing is super quiet went flipped up or down. Love the looks of it flipped down. Absolutely no complaints. Easy to use and set up.
Arrived fast, easy to install on my 2021 Toyota Rav4 Limited. Love that it folds down when not in use. Haven't been to the mountain yet but looking forward to putting it to use. Save the box for storage - came with nice foam ends to protect it.
Thule WingBar Evo Crossbars Installation - 2020 Hyundai Santa Fe
Colin: Hey everyone. It's Colin here at etrailer. Today we have a 2020 Hyundai Santa Fe. We're going to do a test fit of the Thule Wingbar Evo roof rack system. Now, this is a roof rack system that's been designed by Thule to mount to the flush-mount side rails of your Santa Fe. It's going to allow you to get your favorite rooftop accessories loaded up, whether it's a bike rack, kayak carrier, maybe even a rooftop cargo box with those accessories on your roof.
Yakima Roof Rack Installation - 2019 Hyundai Santa Fe
Colin: Hey, what's going on guys It's Colin here at etrailer, and today we have a 2019 Hyundai Santa Fe. We're going to do a test fit of the Yakima JetStream roof rack system. Now, this is a roof rack that Yakima has designed to mount to the naked roof of your Hyundai Santa Fe. So meaning you don't have any type of raised side rails are flush-mounted side rails. It's just completely naked. You're just going to have a fit kit from Yakima that you can see right here, where we have a hook in the door jam, and then a pad sitting on top of our roof clamping it down.
Thule WingBar Evo Crossbars Installation - 2019 Hyundai Santa Fe
Hi, everyone. I'm Colin here at etrailer.Today we are going to take a look at and show you how to install a Thule WingBar Evo roof rack system on a 2019 Hyundai Santa Fe. Now this roof rack system mounts to the flush side rails of your Santa Fe. It's going to allow you to get your favorite Thule accessories on your roof, whether you have a cardboard box, a kayak carrier or even a bike rack. It's going to just help create space on the inside of your vehicle for more passengers or other cargo.Our roof rack system is made up of a couple of different parts. Up top, we're going to have our 47-inch long WingBars.
Rhino Rack Roof Rack Installation - 2018 Hyundai Santa Fe
Speaker 1: Today on our 2018 Hyundai Santa Fe we're gonna be doing a test fit on the Rhino Rack 2500 series square roof rack system, part number DS1375B and part number DK360.The Rhino Rack square bar system is an entry level roof rack for your Hyundai Santa Fe. Though it's not as aerodynamic or as quiet as some roof rack systems it's still gonna allow you to carry a wide variety of accessories such as bike racks, cargo baskets, kayak carriers and much more. It has a square bar design that's gonna work with most accessories. Here on top the raised grooves are gonna help grip our accessories and prevent them from sliding or moving around.The bars are held in place by four legs and four hooks. Both the legs and hooks feature rubber padding so they won't harm or scratch your Santa Fe's roof. All four legs have a unique design to where the lock and cover hides our hardware so it can't be tampered with or removed, two keys are included.
Rhino Rack Roof Rack Review - 2018 Hyundai Santa Fe
Speaker 1: Today on our 2018 Hyundai Santa Fe Sport, we're going to be test-fitting the Rhinorack Vortex Aero roof rack system, comprised of part numbers RRVA137B-2. These are the Vortex Aero crossbars, 54 inches long. These also come in silver as part number RRVA137S-2. We'll also be using part number RRRLKVA. These are the 2500 series legs for the Vortex Aero crossbars. Finally, part number DK360, and this is the custom fit kit for the Hyundai Santa Fe.The Rhinorack Vortex Aero roof rack system is great for carrying a wide variety of accessories on Hyundai Santa Fe, for freeing up space inside your vehicle.
Thule Roof Rack Review - 2017 Hyundai Santa Fe
Speaker 1: Today on our 2017 Hyundai Santa Fe we're going to be doing a test fit on the Thule AeroBlade Edge Roof Rack system. It's available in silver with part numbers TH7602-TH7603 and THKIT4029. For the black, it's gonna be part numbers TH7602B-TH7603B and THKIT4029.The Thule AeroBlade Edge Roof Rack system is specifically designed to work with your Hyundai Santa Fe. It mounts directly to your flush mounted rails allowing you to carry roof mounted bike racks, kayak carriers, cargo boxes and much more. The AeroBlade Edge design is gonna help you maintain that factory look, and it's gonna help complement your roof line.The load bars are constructed out of aluminum. They're aerodynamic, so not only are they gonna be stylish, but they're gonna offer you a smooth, quiet ride.
Rhino Rack Roof Rack Review - 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe, we're going to be taking a look at the Rhino Rack Vortex Aero Roof Rack System consisting of part numbers RRVA137B-2. Those are the Vortex Aero Crossbars 54" long in black. These also come in silver as part number RRVA137S-2. We'll also be using part number RRRLKVA, and these are the Rhino Rack 2500 Series Legs for the Vortex Aero Crossbars. Part number DK360, and this is the custom fit kit for this vehicle. Now, the Rhino Rack Vortex Aero Roof Rack System is great for carrying a wide variety of objects, and possibly freeing up some space in your vehicle. It can carrying anything from bike racks, to cargo baskets, to cargo boxes to water sport carriers, such as kayaks and canoes, or even ski and snowboard carriers.
Inno Aero Bar Roof Rack Review - 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe we're going to be test fitting the Inno Aero Roof Rack System consisting of part numbers INXB138-145. These are the Inno Aero Crossbars. Aluminum. 54" Long and 57" Long. Part number INXS250. These are the Inno Through Feet for the Aero Crossbars.
Inno Roof Rack Review - 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe, we're going to be taking a look at the Inno Aero Roof Rack System, consisting of part numbers INXB130-138, those are the Inno Aero Crossbars, 51 and 54 inches long; part number INXS250, those are the Inno Through Feet; and part number INK655, and that's the Custom Fit Kit for the Santa Fe. The Inno Aero Roof Rack System is great for carrying a wide variety of objects and freeing up space inside your vehicle. Since it uses the through feet, you can actually have more accessories coming further out as opposed to the other Inno feet that actually cover the end. You can carry a wide variety of accessories ranging from bike racks to cargo baskets to cargo boxes to water sport carriers to ski and snowboard carriers. All four of our end caps have these locks on them, so once you install this to your roof rack it's going to be secured to it. When you remove your end caps, you'll see that it has this rubber strip here in the center. Now, that coupled with the aerodynamic shape of the bars is going to cut down wind noise and drag while you're driving.
Inno Roof Rack Review - 2017 Hyundai Santa Fe INK655
Today on our 2017 Hyundai Santa Fe, we're going to be test-fitting the Inno Roof Rack System, consisting of part numbers INXB108-115. These are the Inno Aero Cross Bars, in black, 42 inches long and 45 inches long, part number INXS200. These are the Inno Flush Feet for the Aero Cross Bars, part number INK655. This is the custom fit kit for the Inno Flush Feet. The Inno Aero Roof Rack System is great for carrying a wide variety of objects and freeing up space in your vehicle. It can carry anything from bike racks to cargo baskets, to enclosed cargo boxes, to water sport carrier, to ski and snow board carriers. Each end cap is lockable so once you install these, they're actually going to be secured to your roof.
Inno Square Crossbars Roof Rack Installation - 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe, we're going to be taking a look at the Inno Square Bar Roof Rack System. Consisting of part numbers INB137, and these are the Inno Square Crossbars, 54 inches long. Part number INSU-K5, these are the Inno Feet for the Square Crossbars, and part number INK655, and that's the Custom Fit Kit for the Hyundai Santa Fe. The Inno Square Bar Roof Rack System is great for carrying a wide variety of accessories, ranging from bike racks, to cargo baskets, to cargo boxes, to watersport carriers, to ski and snowboard carriers. It enables you to free up some space in your vehicle, and put some stuff on your roof. The square bars are tough and durable, and have a max load capacity of 100 pounds. Although always double check with your vehicle's manual to make sure your roof can withstand that weight.
Yakima CoreBar Steel Crossbars Installation - 2016 Hyundai Santa Fe
Today on our 2016 Hyundai Santa Fe, we're going to be taking a look at and installing the Yakima BaseLine Roof Rack System with CoreBars. That consists of the 60" Yakima CoreBars, part number Y00422, the BaseLine Towers, part number Y00146, and the BaseClip Fit Kits for Hyundai Santa Fes, part number Y06130 and Y06133. This heavy duty, yet quiet, roof rack system maximizes the carrying capacity of your Santa Fe. The aerodynamic teardrop shape controls air flow to minimize wind noise and vibration. These steel crossbars are going to allow you to attach a wide variety of accessories to your Santa Fe's roof, such as bike racks, boat carriers, and roof mounted cargo baskets. The BaseLine towers are going to support our CoreBars and the BaseClips are going to provide a custom fit to our Santa Fe. For more security, you could pick up the Yakima Same Key System Lock Cores with part number Y07204. It's an easy installation. We'll go ahead and show you that now.
Rhino-Rack Vortex Aero Roof Rack Installation - 2016 Hyundai Santa Fe
Today on our 2016 Hyundai Santa Fe, we're going to take a look at the Rhino-Rack Vortex Aero Roof Rack System. The crossbars are RRVA137B-2, and the legs are RRSX032. I have the first one already on. I'm going to show you how to install the second one. What we have here, we have our Aero Bar. We have our legs that go to our side rails.
Thule Roof Rack Review - 2016 Hyundai Santa Fe
Today on our 2016 Hyundai Santa Fe, we're doing a test fit of the Thule Aeroblade crossbars. Part number for our crossbars is THARB47. For the foot pack we are using today, we are using the podium mount, part number TH460R, and for the fit kit for our Santa Fe, we are using THKIT4029. I already have our front bar on. On our back bar, I've got one foot pack already in place and installed, so we're just going to show you how to do the other one on this side, and then we'll show you how we load up our back bar. We're going to take these two pieces from our foot pack. I've gone ahead and moved it so the hole lines up in the center there.
Rhino Rack Roof Rack Review - 2015 Hyundai Santa Fe
Today on this 2015 Hyundai Santa Fe, we're going to be test fitting the Rhino-Rack Vortex Arrow Crossbar Roof Rack System, consisting of part numbers RRVA137B-2, those would be the crossbars, and part number RRSX032, and those are the SRB legs for the Vortex Arrow Crossbars. We already have the front crossbar installed, and these are going to work in the fixed mounts on your flush rail system on your Santa Fe. You're going to have three options to mount them in, and we've decided to go with the center option, and we'll repeat that for the rear, as well. Let's go ahead and show you how the rear one goes together. We already have it partially assembled, as that we have one leg already attached. I'm going to go ahead and flip this upside down. We'll start at the end. We'll pull off our end cap first, set that aside, then we'll take our leg and put it in place.
Rhino-Rack SRB Leg Kit Installation - 2014 Hyundai Santa Fe
Today on our 2014 Hyundai Santa Fe Sport were going to be installing the Rhino Rack Vortex Aero Crossbars in Aluminum in the black color. These are 54 inch long as well as the Rhino Rack SRV leg kit for the Vortex Aero Crossbars in flush factory rails. The crossbars are part number RRVA137B-2. The SRV leg kit is part number RRSX032. These are sold as a kit. Weve gone and already installed the rear crossbar and the foot pack to show you what it looks like on the vehicle. Now youll notice that there are three holes drilled into the roof bar. Now on our particular application here today we chose to put it in the center mounting location.
Rhino-Rack Vortex Aero Roof Rack Installation - 2014 Hyundai Santa Fe
Today in our 2014 Hyundai Santa Fe Sport we're going to be test fitting the Rhino-Rack Vortex Roof Rack System. We're going to be using the 54 inch arrow bars. The part numbers are RRVA137B-2, RRRLKVA, and DK360. To begin our test fit we'll grab the front half of our rack here and we're going to open the front doors on our Santa Fe. We'll then place our rack right up on to our the front roof line of our vehicle here. Now per the fit guide from Rhino-Rack we need to measure 16 inches, from the center of the door jam here.
Thule Roof Rack Review - 2013 Hyundai Santa Fe
Speaker 1: Today on our 2013 Hyundai Santa Fe, we're going to be test fitting the Thule AeroBlade Edge Roof Rack System. This is going to consist of part numbers TH7602-TH6703. These are going to be the Thule AeroBlade Edge Load Bars. These also come in black as part number TH7602B-TH7603B. And we're also going to be using the Fit Kit to go around your Flush Mount Side Rails, and that's going to be part number THKIT4029.Now we already have the front bar installed here. And how we got it to this point is we set it on, and measured back from this crevice here, to this point on both sides evenly, to make sure it was going to be in the same spot.
Inno Roof Rack Review - 2013 Hyundai Santa Fe
Speaker 1: Today on our 2013 Hyundai Santa Fe we'll be taking a look at and showing you how to install the INNO Roof Rack System. This is going to consist of the INNO Arrow Blade Cross Bars part number INXV108-115, the INNO Plush Feet part number INXS200, and the Custom Fit Kit for our Santa Fe part number INK655.The INNO Roof Rack System is an aerodynamic system that allows you to carry your accessories on your vehicle's roof, whether those are bike racks, kayak carriers, ski and snowboard carries, or cargo baskets. The aerodynamic shape of the bars as well as the weather strip on the inside is going to help to reduce wind noise and drag. Unlike other weather strips, all you have to do is push down the weather strip to insert any kind of channel mounted accessories instead of having to remove it.Our foot pack does come with a lockable end cap. This is going to be helpful if we do have those channel mounted accessories to prevent any theft and tampering of those, as well as our roof rack system. The fit kit is going to be custom cut to our Santa Fe, and has rubber portions on any part that's going to touch our vehicle to prevent any scratches or abrasions.
Rhino Rack Roof Rack Review - 2013 Hyundai Santa Fe
Today on our 2013 Hyundai Santa Fe we'll be taking a look at and showing you how to install the Rhino Rack Roof Rack System. This is going to consist of the Rhino Rack Vortex Arrow Cross Bars, part number RRVA137B-2, the Rhino Rack 2500 Series Legs, part number RRRLKVA, and the Custom Fit Kit for our Santa Fe, part number DK360. Now, keep in mind our cross bars are also available in silver, part number RRVA137S-2. The Rhino Rack Roof Rack System is going to be a great solution for carrying your vehicle accessories on your roof, whether those are bike racks, cargo baskets, ski and snowboard carriers, or kayak carriers. The aerodynamic shape of our bar as well as the weather strip on the inside is going to help to reduce wind noise and drag. We can also remove that weather strip, cut it down, and place in channel mounted accessories. The end cap has a plastic lock core which can be replaced with an all metal lock core to help prevent theft and tampering of your channel mounted accessories. The locking cover on our foot pack is going to prevent any theft or tampering of our roof rack system as a whole.
Thule Roof Rack Review - 2013 Hyundai Santa Fe
Today on our 2013 Hyundai Santa Fe Limited we're going to be test fitting the Thule Podium roof rack system. We're using the 50" square bars. Those are part number THLB50. We've got the Podium foot back system; that's TH460. And we're using the Thule Fit Kit, part number THKIT4029. I've pre-assembled three of the four feet. I wanted to show you how this goes together.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."