Best Forest River Rockwood Mini Lite Travel Trailer Trailer Lights

Delivery was so very slow that I don't have time to install before I leave on a trip with the trailer tomorrow. the light inside is halogen not LED. I was guided on my selection by one of your employees, polite but got it wrong.

I couldn't find taillights for a 50 year old Shasta travel trailer,so I bought these. The wiring is little different but these will work.

Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.

I bought this to replace a broken original marker light on our 1995 motorhome. Pros - LED, sleeker look than original, easy to wire if you are familiar with wiring lights for vehicles/trailers, priced better than incandescent. Cons - The screw holes are closer together than my original fixture but I drilled a new pilot hole for the second screw and it was fine, the light sticks out further than the original, and I don’t like squatting or kneeling in order to fix things, anymore (but that’s just a reflection on me and not the light).

Excellent side reflector lens for my 2003 zieman double axles trailer. Very easy to install and product very good quality material.

Shipped quickly, good quality, another good experience with etrailer.com

It's very hard to find a black base on marker lights in local stores throughout the US. I'm glad etrailer carries black base marker lights to match my camper's other lights. This worked great!

I received the exact product that you advertised delivered promptly packaged well and looking forward to installing these marker lights

This is a good quality light, water tight and worked well. It has been on the trailer for over a year now and still has no issues. The lens can interchange on other similar bases, but if the base is old and damaged like mine was, this is a great replacement.

Easy replacement for my Thor Hurricane back lights.

Etrailer had an exact replacement for my rv taillight, shipping was quick

I needed a tail/stop light for the rear of my Fairmont railway motorcar and thought from your on-line description that this product would be satisfactory. I was right, it is a good size and bright enough to be very visible in bright sunlight. As you can see from the pictures, to make it match aesthetically I attached the lamp to an aluminum plate cut to fit in an old auxiliary lamp housing. The railway car runs in both directions hence has head and tail lights on both ends. I am very satisfied with this light.

First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.

Lights are great. The packaging on the other hand was atrocious. 13 light tossed in a box with no packaging the keep them from banging into each other. Lenses all had minor scratches that could have been avoided with a little bit of care.

just what I needed--- easy installation, just remove the old light strip, put the new one in place , make your electrical connection, good to go---no special tools, you do need a stepladder to get up to the work area

Good product and lights up well. The glue could be a bit stronger than it is. Had a couple parts of the strips come loose when the weather got warm.

The passenger side never worked. Right straight out of the box it was trash. Would've returned them but waited too long to install them so I couldn't return them.

Lights are great. The packaging on the other hand was atrocious. 13 light tossed in a box with no packaging the keep them from banging into each other. Lenses all had minor scratches that could have been avoided with a little bit of care.

I ordered one of the amber-lensed units from etrailer a couple of years ago. That one is still working fine and I expect this one will work equally well now and into the future. They're a little pricey for what they are but they're an exact replacement for the ones on my camper, unlike the less-expensive alternatives I've found that have different spacing on the attachment screws. I don't need any more holes in my RV than I've already got, thank you very much.

I was able to order the exact light replacement for our 5th wheel. None of the area rv stores carried the light. the online system was easy to use and I received the lights in a timely manner.

This was a replacement for the OEM marker light installed by Jayco. It failed within the first year, probably because it was installed upside down(drain holes in the amber cover facing up…) the light assembly is marked TOP. Oh well! I did check the other three and they were installed correctly and are still working… With the OEM part number I matched it to this part from Etrailer. Confirmed dimensions and placed the order. Note the new light comes without screws.

This is the second time I've purchased one of these from eTrailer to replace a failed clearance light on my coach. It is an exact replacement for the OEM light and works great, just like the one I replaced a couple years ago continues to do. Also, economy shipping was surprisingly fast.

The light assemblys ordered were back ordered but shipped to me as soon as they were available. The fit was perfect. Had some problems with the wiring,the coach had 8 wires and the assy had 6. Once figured out the install went quickly. Perfect match.

Command Triple LED Tail Light Review They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system. This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow. Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.