Summer Starts Here - Save up to 70%
# 1
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.
The Swagman XTC-2 platform bike carrier arrived very quickly from etrailer and in good shape, the actual carrier box is inside another shipper box, which I'm sure helped with its condition. Assembly was relatively quick and painless, even though the instructions could be a little more thorough. Installing the carrier on the back of our Jeep Patriot also was quick, it helps to have an extra ratchet & 3/4" socket laying around for just this purpose. Installing the bikes takes a little patience and trial and error the first time you try and put them on the carrier. It's easy enough to adjust the wheel holders to fit the wheelbase of your bikes, but for us at least, the challenge was trying to swing the vertical support bar up into position after putting on the first bike (closest to the Jeep). We couldn't angle the bike enough toward the Jeep to have the bar clear the bike. We learned that the easiest way to secure the first bike was to remove the ratcheting frame hooks altogether, put the bike in the carrier, swing up the vertical support bar, put in the pin, and then slide one of the frame hooks down on the bar. The outside bike is much easier because you can set the bike in the carrier at whatever angle you need, not being limited by the back of the vehicle. One thing we did to protect the bike frames was to use some foam pipe insulation as cushion between the frame hook and the frame (see pictures). Once you get a system for installing the bikes, it is very quick to load/unload them. The rack seems to be well made and doesn't wiggle excessively when traveling. All in all a good product for a good price, would definitely recommend it for anyone looking for a platform bike carrier.
# 2
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
The good: I like the way the bikes are held in and the ability to add the upright adapters to the bike frame holders. The straps are quality too. For a jeep with a spare tire, this is the perfect length to clear it. This rack is 5 stars from the bike holders to the base of it. The bad: the 2"receiver adapter and bolt are insufficient. I wish they made this in a solid 2" hitch. The entire setup is held into the receiver by a very short bolt. It only goes about half way into the receiver tube. So your hitch is only "secured" on one side. A hitch pin or bolt should go through the receiver tube completely imo so it can be secured on the other end with a retaining clip or nut. Because this only goes in the one side, the entire weight of the rack plus bikes are held tight to one side of the receiver by the undersized bolt and washer. A few bumps down the road and that bolt loosens. Now instead of distibuting the weight of the rack and bikes on the receiver and post, it's completely up to the bolt to keep you from losing the rack. The bolt threads get damaged too. I took this down a dirt road and nearly lost everything. I had to buy my own bolt with hd fender washers and lock washers to correct this. Thule should've provided this from the start. The current short bolt design where only one side of the receiver secures the rack is unacceptable. This rack is 1 star at best for the connection to the receiver.
I bought this bike rack back in April but wanted to make sure I used it to give the best review. First I want to say I did a lot of research on bike racks and found this one to be the best one to fit my needs. The best price I found was on etrailer.com, at the time it was When I called the customer service to place my order, I spoke to Dan. He was very pleasant on the phone and took the time and listened to what I needed and understood my concerns. I ordered the bike rack and also ordered the Thule Snug Tite Hitch Lock and Anti-Rattle Device and the Thule Cable Lock w/ One Key System Lock. Dan suggested I also get the Thule Bike Adapter Bar, which I never even thought of getting. Delivery was in about two business days, which was really fast and at the time of order they were running a special free delivery over $99. When I went to put it together I noticed I was missing the flat cap screw M6 x 16mm, part number #853-5787-02. I emailed Dan and within 24 hours received an email that the part was sent out and also in the email their was a link to track the order. After I received the part I did notice that the flat cap screw was actually in the 2 inch adaptor sleeve. The instructions were very easy to read, and it took me about 20 minutes to put together. I did have an issue when I positioned the stinger into the cradle, with the 8mm locking nut, it was not staying tight and when I took it off I noticed the threads inside were gone, so I ended up going out to Lowes and buying a new one and its holds perfectly fine. I also had a question about that part because it is not a locking part and was worried someone would try to steal the rack. I contacted etrailer.com to find if they make a locking device for this and they said no but I can contact Thule to double check, I'm still waiting for an answer back from Thule. The weather finally broke and we installed the rack onto my hitch, tightened it and it doesn't rattle. When I finally used the rack and put my bike on, it did sway a little but at 50 mph I was very happy with it. The trailer comes out just enough away from my car that I do not have to fold completely out and I can open my trunk with no issues. I am very happy with my purchase and had a great customer experience with Dan. Would highly recommend ordering from them to anyone.
# 3
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
It works great! Easy, quick, you know. One needs to screw in the hitch bolt, for some reason, before latching it. Other than that, it makes going bike riding way easier.
I like the overall design of this rack, but unfortunately after hauling a couple bikes around for a while the point where the crossbar connects has apparently rounded off so the rack swings back and forth. I've used rope to tie the ends of the rack to the car to stop this from getting worse, but it's inconvenient. Note: the hitch connection itself is good and solid, but the point where the crossbar connects to the bar coming from the hitch has gotten loose and there's no way that I can see to tighten it.
# 4
Swagman Trailhead Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
etrailer has the best pre- and post-sales customer service I've ever seen! I started out not knowing anything about hitch-mounted racks. So I wrote to etrailer telling them about my car and type of hitch I was about to have installed. Samuel wrote back with lots of great information tailored specifically to my car. He even included a photo that looked just like my 2017 white VW GTI with a hitch and rack installed. Okay something of a coincidence. But the rest of the assistance I got from the crew at etrailer was just as prophetic. I went into this a novice and came out knowing lots more about hitches and racks and finding the rack best suited to my situation. I have a small car, a class 1 hitch and a heavy mountain bike. I got exactly what I needed. As to the Swagman rack itself, it works fine. If I had a different situation I would probably buy a platform rack as they are easier to load. There's no reason to buy a bike rack anywhere else.
First off, thanks to Jason T. or "Troop". The exemplary customer service he provided is rare these days. Troop made several calls to the various manufacturers to ascertain which bike rack would afford me the most ground clearance as my new VW Golf sits low to the ground and my old bike rack frequently scraped the ground when I went up even a slight up hill grade. His efforts paid off as he found me the best bike rack for my car, the Swagman Trailhead 2 Bike Carrier. It sits up off the ground just high enough that it doesn't scrape on my driveway. It is also sturdy and holds my bikes securely. And, the delivery was amazingly fast. I had my rack in about 2 days! Note to Troop, see my Pittsburgh Pirates Logo on my bumper in the attached pictures? Pirate Fans persevere! The Bucco's will be coming after your Cardinals this year! Thanks again Troop!
# 5
Swagman Trailhead Bike Rack for 3 Bikes - 1-1/4" and 2" Hitches - Tilting
Draw-tite Sportframe Trailer Hitch Receiver Class I - 1-1/4 Swagman Trailhead 3 Bike Rack - Tilting The Draw-tite Sportframe class 1 trailer hitch and Swagman Trailhead 3 bike rack were ordered for a 2017 Honda Fit. The online order and shipping went just as expected. The trailer hitch and bike rack are very heavy duty. I recommend watching the trailer hitch install video before installing, whereas the video is very helpful. The bike rack has triangles that you can rotate to find the best fit for your bicycle's frame. The rubber straps are thick and secure the bicycles when you pull them tight. This bike rack will stay on the vehicle for 6 months each year. The tilt feature and folding arm feature are must haves for a smaller hatchback. I am pleased with this purchase, it appears to be good quality and good value.
My previous bike rack was a hitch mounted Yakima. It was sturdy but not well suited for my low Subaru Impreza. It stuck out too far and hung too low so that I had to inch my way down the driveway or over speed bumps for fear of it bottoming out. A roof rack or a rear window mounted rack was not suitable since I wanted to be able to also carry two kayaks. First, I tried to modify my rack by shortening the part that sticks out of the hitch. I tried to saw off about 6 inches so it wouldn't stick out so far but the steel was much too hard. I ended up ruining several metal-cutting blades on my power saw before I gave up. I looked for other rack options. There weren't many out there. But eventually, I found something that met my needs. I purchased the "Swagman Trailhead 3 Bike Fold Down Bicycle Hitch Rack" in 2013 from eTrailer.com. The part that enters the hitch curves up to increase clearance from the ground. It is sturdy and sticks out far enough so I can still open my trunk hatch without having to lower the main vertical bar on the hitch (though I could if I wanted to). It isn't often I am really excited about a piece of gear but this hitch rack has made me worry-free when I transport my bicycle(s) via car. The only thing I don't like is that it is advertised as being a 3 bike carrier but it only fits 2 hybrid bikes. Maybe it will fit 3 skinny racing bikes but for the average rider, don't expect to fit on more than 2. But my experience is that is the case for all bicycle racks.
# 6
Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.
Loved our Saris rack that went on the trunk but love having the bike rack on a hitch even more! Now we can take the bikes AND put the top to the convertible up and down as we please :)
# 7
Swagman Trailhead Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
Quick and reliable shipping and was able to take to my mechanic to get it installed and it works perfectly with my bike rack!
This is a very solid product! I have used it for over a year now and love it! I have had up to 3 bikes on this without a problem and have traveled over 8 hours in the car one way with absolutely no issues. Many other bike racks like this one that I see on other cars look unstable this is not unstable in anyway. I did have to file some of the paint off of the rack to get it to fit in my 1 and 1/4" hitch but once that was done it has been perfect. I also bought the locking hitch bolt which is awesome too.
# 8
Kuat Beta Bike Rack for 2 Bikes - 1-1/4" Hitches - Tilting
I was looking for a light weight bike rack for my 2015 Honda Accord. Your videos stated that the Kuat Beta was light and easy to install. You were right. I opened the box, read the instructions, and had it installed in about 10 minutes. I don't use a rack lock. It is so easy to pop on and off the hitch that I keep the rack in my car trunk.
We've been using this bike rack with a 1.25" Draw-Tite receiver hitch (also purchased from etrailer) on a 2012 Prius C for a month with no problems. As shown on the pictures, it fits two bikes very well, even one with a baby carrier. I chose this model based on recommendations from etrailer that it can be easily detached from the car without tools. True to their word, it is very easily detachable from the hitch and folds up nicely to fit in your garage/closet/storage area. Basically, it uses a hand tightened ball bearing mechanism to secure itself into the hitch receiver, and then uses a 3/8" hand locked pin as a safety device. You can install and de-install this rack in just a few minutes. During driving, there is little noticeable vibration from this rack, even on rougher roads or speed bumps. The only downside is that the holes on the receiver hitch do not align perfectly with the holes on the bike rack (see picture). I believe a few other reviewers also noted this issue. There is enough room to fit the safety pin, but not quite enough to fit a 1/2" hitch lock. I called Kuat to ask them about this and the rep told me that not all hitches will line up with this rack. Kuat, coincidentally(?), sells a hitch lock that is also 3/8" (same size as the safety pin) and still fits.
# 9
Swagman Titan Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
One of the few racks that will clear my Jeep's large rear mounted spare tire without using an extender. The other is the Allen which doesn't have the nice features the Swagman Titan has. Tips enough to allow partial opening of Jeep rear door, but enough to open the soft top rear window. The vertical portion of rack tips slightly toward vehicle (at least it does on mine). Would be better if the horizontal "S" shaped piece could be turned around to dip down, moving it further from the spare tire, but there are only holes drilled to mount it as shown. Can't attest to the durability yet, but it doesn't wobble even a tiny bit. Have to compliment everyone I spoke with at etrailer. very nice and extremely helpful.
eTrailer.com had my new Swagman Titan bike rack delivered super fast. I received the right amout of email communication informing me of the status of my order, plus I could track my delivery directly from the eTrailer website. Awesome! As for the hitch, I am so happy with it. I was tired of taking the front wheel off my bike and cramming it into the back of my small Corolla, it never really fit right, was always a struggle, and then I had no room for anything else in my car. Now, I just hang my bike onto the rack and strap it in, takes less than 60 seconds and I have all the extra room in my car and don't have to fold down the back seats. The other feature I really like is that this bike rack has an integrated locking cable, once your bike is on the rack, you attach the locking cable so now your bike is locked onto the rack. Someone can't take your bike off the rack and walk away with it when you aren't looking. I also got the Swagman bike rack locking pin, that attaches the bike rack to the car hitch. I've used the bike rack twice so far and it makes my life so much easier. Solidly built bike rack that is well worth it. Thank you eTrailer, you rock!
# 10
Rhino-Rack Bike Rack for 2 Bikes - 2" Hitches - Tilting
The unit ‘s simplicity is a real plus. It takes less than 3 minutes to put the rack on the vehicle. It is well built and very durable and has a nice feature that allows you to open the rear hatch for SUV owners without removing the rack.
I purchased this bike rack a year ago and I use it A LOT. I had to buy and install a stabilizer because without it, the unit would sway back and forth even without a bike on it (very noisy). This makes removal more cumbersome but since I keep the hitch on year round it doesn't matter to me. The tilting function is fabulous allowing easy use of my RAV4 hatchback. I can even tilt it down with a bike on it. I got the 2 bike hitch. Plenty of room for two bikes to fit without rubbing. Lastly, the hitch has a sizable through-hole on the bottom to thread a good sized cable so I can lock my bike up. Sturdy. I highly recommend.
# 11
Swagman Titan Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
Very good product. Happy to find a bike rack that fits my 2005Rav4 that has a spare tire at the back of the car. Very easy to install. Instructions for use of the key that was with the rack was missing, but I was able to find on etrailer's website. Top of the rack was around one inch above the highest point of the spare tire. Touched a bit of the tire cover when I started loading the bikes, but requires a minor positioning, moving to one side by less than an inch to make sure it doesn't touch the spare tire cover. Minimal sway on movement, but stable all the way from Massachusetts to Maine, and back. Unfortunately still unable to open the car's back door even when tilted, but this should not be a problem with newer cars that have move clearance at the back. Just have to move the car seat forward to have access to the back of the car, but at least I can travel with all bikes (3). Needs a "tube" for kids bikes. Also needs a tool to tighten/ remove the screw into the hitch, but should not be a problem if one can access the back of the car by tilting the rack, and doesn't have to remove the rack all the time. Not a perfect rack for my current car, but best match I could find, given the minimal clearance at the back because of the spare tire. Should be able to use with a future car.
I've had this for about a year now using with 2 adult bikes and a kid bike, no problems at all - carries the weight and is stable. It's heavy when taking on/off the hitch socket, but that's fine - you want something sturdy to hold your bike investments stable on the highway. This does the trick. The cradles can be slid back and forth, or rotated infinitely to suit your needs, which I really appreciate. Overally, good value for the money, and I would recommend.
Kuat Hitch Bike Racks Review - 2020 Ford Fusion
Hi, everyone it's Evangeline here at etrailer. And today we'll be taking a look at our Kuat Sherpa 2.0 two bike rack right here on our 2020 Ford Fusion. So you have a smaller sedan, but that should not stop you from having big adventures. So when you wanna take your bikes out from one place to another, you wanna bring them to their trail, what you need is a bike rack kinda like this one. This is the Kuat Sherpa, which is nice, compact, portable, and still has premium features that you would expect from a Kuat bike rack. So one of the features we'll look at is the tilt away feature.
Kuat Hitch Bike Racks Review - 2020 Ford Fusion NV22G
Hi everyone. It's Evangeline here at Etrailer. And today we'll be taking a look at the Kuat NV 2.0 2-bike rack right here on a 2020 Ford Fusion. So the Kuat NV is probably one of my favorite bike racks. It just checks off all the boxes. It has all the premium features you could ask for.
Kuat Hitch Bike Racks Review - 2017 Ford Fusion
Hi, everyone. It's Evangeline here at etrailer.com. And today, we are looking at our Kuat Transfer V2 single bike rack here on our 2017 Ford Fusion. Now, this is an awesome bike rack. If you are looking for something that's simple, compact, works really well, but also, can carry your heavy electric bikes. Now, the way this works is one of its features is that it can tilt away.
Hollywood Racks Hitch Bike Racks Review - 2017 Ford Fusion
Hi everyone. It's Evangeline here at etrialer.com and today we are looking at our Hollywood Rack Destination 2-Bike Platform style rack here on our 2017 Ford Fusion. Now, this is a really good bike rack. If you are looking for something that is super light and pretty affordable but also allows you to carry around two bikes for your adventures. Now, one of its features is that it can hold your bike in by this frame mount. So we have it mounted by two wheel straps as well as a frame mount, which can adjust.
Inno Hitch Bike Racks Review - 2017 Ford Fusion
Speaker 1: Today on our 2017 Ford Fusion, we're going to be test fitting the Inno Aero Light four bike rack for inch and a quarter and two inch hitches. It's going to be part number INH640. As you can see, we already have a bike installed, so let's take a look at some of the features.Now starting from the outside and working our way in, we have this integrated cable lock system that stretched out from the base of our bike rack, wraps over our bikes, and simply inserts into this little notch right there. Now when you want to unlock the cable, you will get a set of keys for that and you simply lift up this little tab, you insert your key, right in there, and that unlocks the cable and then making it easier to unload your bikes.When we come to our cradles, we see they pivot back and forth or side to side rather and they move up and down on the bike rack. That's going to help out with any size bike frame you might have or any spacing you might want between your bikes. These cradles also have a nice rubber coated surface that's going to help protect your bike from any abrasions or scratches when you're loading and unloading and during travel.If we come in closer we see that our bikes connected at three different points of contact.
Inno Hitch Bike Racks Review - 2017 Ford Fusion INH620
Speaker 1: Today on our 2017 Ford Fusion, we're gonna be testing the Inno Aero Light 2 Bike Rack for inch and a quarter and two inch hitches. That's gonna be part number INH620. As you can see, we already have a bike installed so let's go ahead and take a look at some of the features.Now starting from the outside and working our way in, we have this integrated cable locking system where the cable comes out from the base of the bike rack, comes around our bikes, and it's simply gonna lock into place right here in this little notch. When you wanna unlock the cable, you will have received a set of keys with your bike rack, you simply slide up this little tab and you have the insert for your key right there to unlock it and unload your bikes.We come over to look at the cradles. We can see that they pivot left and right and they also scoot back and forth along the bike rack and that's gonna be very good for any type of bike frames you might have or any type of spacing you might want between your bikes when it's fully loaded.Up here, we can see the bike is connected at three different points of contact. We have two straps on the top of our frame and they're sitting in their cradles.
Kuat Hitch Bike Racks Review - 2017 Ford Fusion
Speaker 1: Today on our 2017 Ford Fusion we're going to be test fitting the Kuat Transfer Two Bike Platform Rack for 1 1/4" and 2" hitches. That's going to be part number TS02G. As you can see we already have a bike installed, so let's take a look at some of the features. Like most platform style racks this bike rack can tilt away from the vehicle in order to provide rear hatch access.To start I'm going to pull up my other wheel hook, grab a hold of my two wheel hooks, there's a foot pedal down here, we're going to press down, now that's going to let our bike rack tilt away like so. Now I can slide right in and access anything I might need in my rear hatch. To tilt it back we're simply going to grab a hold of our two hooks and push back until it latches like so.To come and see how our bike is secured, it's secured at two different points of contact.
RockyMounts Hitch Bike Racks Review - 2017 Ford Fusion
Speaker 1: Today on our 2017 Ford Fusion we're going to be test fitting the RockyMounts MonoRail Solo one bike platform rack for 1 1/4" and 2" hitches. That's going to be part number RKY10007.As you can see, we already have a bike installed, so let's take a look at some of the features. To start, this bike rack does come with a cable locking system. You simply just lock the cable around the bike and then back through the cable, itself, and it attaches at this point right here. Your bike rack does come with a set of keys, so you can unlock the cable and thus unload your bike.This bike rack can carry a wide variety of bikes, ranging from this road bike we have right here to even fat tire bikes, being up to 5" in length. As you can see from the cradles they are wide enough to hold them.
Yakima RidgeBack Hitch Bike Racks Review - 2017 Ford Fusion
Speaker 1: Today on our 2017 Ford Fusion, we're going to be test fitting the Yakima Ridgeback two bike rack for inch and a quarter and two inch hitches. That's going to be part number Y02457. Now, as you can see we already have a bike installed. So let's take a look at some of the features. As you can see on the outside of both of these polls, we have the Yakima bottle openers. If we look over here, we see that the cradles are stationary, but each cradle does have a zip strip installed with it.
Swagman Hitch Bike Racks Review - 2016 Ford Fusion
Today on our 2016 Ford Fusion we're doing a test fit of the Swagman XT2 platform-style 2-bike rack. That part number is S64650. Now we already have our bike secured down. We're first going to show you how we do that. Here in the center we have our frame hook, which is really going to hold our bike down into our wheel cradles. It's going to keep it very stable and give you a smooth ride with your bike.
Kuat Hitch Bike Racks Review - 2016 Ford Fusion
Today on our 2016 Ford Fusion we'll be doing a test fit on the Kuat Transfer Three Bike Rack. That's part number TS03G. Now, it's also available as a two bike rack and that's part number TS02G. I've already got it loaded up on the Fusion just to give you a good idea of what it looks like and how it's going to secure our bikes. It actually secures our bikes in two spots. We have this large front wheel hook putting down pressure on our front wheel into the front wheel cradle. Then we have a rear wheel strap going between our spokes, and then keeping our rear wheel in place.
Thule Hitch Bike Racks Review - 2016 Ford Fusion
Today in our 2016 Ford Fusion, we will be doing a test fit of the Thule Vertex 4 bike rack. That's part number TH9029XT. I've already got it loaded up on the Fusion just to give you a good idea of what it looks like and how it's going to secure our bikes. As you can see, it's a hanging-style bike rack. It secures our bike in three spots. We have two straps for our top tube and the one strap for our down tube.
Thule Hitch Bike Racks Review - 2016 Ford Fusion TH912XTR
Today, on our 2016 Ford Fusion, we'll be doing a test fit on the Thule Roadway 2 Bike Rack. That's part number TH912XTR. I've already got it loaded up on the Fusion, just to give you a good idea of what it looks like, and how it's going to hold our 2 bikes. You can see it's a hanging style bike rack. It's going to secure our bikes in 3 spots. We have 2 straps for our top tube, and then for our seat post tube, we have an anti-sway strap.
Swagman Hitch Bike Racks Review - 2016 Ford Fusion S63380
Today on our 2016 Ford Fusion, we'll be doing a test fit on the Swagman Trailhead 4 Bike Rack. That's part number S63380. I've already got it loaded up on the Fusion just to give you a good idea of what it looks like and how it's going to secure our bikes. As you can see, it's a hanging style bike rack. It's going to secure our bikes with four straps. You have three straps for our top two up here, and our seat posts, too, we've got one strap here. This is going to be our anti-sway strap.
Saris Axis Hitch Bike Racks Review - 2015 Ford Fusion
Today on our 2015 Ford Fusion, we're going to be doing a test fit of the Saris Axis. This is going to be your hanging style 2-bike rack, part number SA832. This bike rack does come with 1-1/4" shank for your class I and II hitches as well as a 2" adapter. We're going to go ahead and see how it looks and fits on our Fusion that we have here today. The first thing you're going to do is insert the shank into the receiver and line up the pin holes. Once you have the pin holes lined up, insert your anti-rattle bolt and thread it in as far as you can by hand. This anti-rattle bolt is going to help to eliminate a lot of the play, rattle, and wobble that you may have in your bike rack as you can see there.
Saris Bike Porter Hitch Bike Racks Review - 2015 Ford Fusion
Today on our 2015 Ford Fusion, we're going to be doing a test fit of the Saris Bike Porter. This is going to be your hanging style 4 bike rack. It comes with an 1 1/4 shank for your class 1 and 2 hitches as well as an adapter for your class 3 hitches. It's going to be part number SA404B and we're going to go ahead and get it fitted onto our vehicle that we have here today. First insert your shank into your receiver and line up your pin holes. Once you have your pin holes lined up, take your anti rattle bolt, place it in and thread it in as far as you can by hand.
Saris Freedom SuperClamp Hitch Bike Racks Review - 2015 Ford Fusion
Today on our 2015 Ford Fusion, we're going to do a test fit of the Saris Freedom Super SuperClamp. This will be your platform style two-bike rack. Part number SA4025. Comes with 1-1/4" shank for the class 1 or 2 hitches, as well as a 2-inch adapter for your class 3 hitches. We're going to show you how it looks and fits on our vehicle that we have here today. First step is going to be to insert your shank into the receiver and line up your pinholes. From there, we'll take off the lock on the end of the anti-rattle bolt, and thread it in.
Swagman Titan Hitch Bike Rack Review - 2014 Ford Fusion
Ryan: Hey everybody, Ryan here at etrailer. Today on our 2014 Ford Fusion, we're going to be taking a look at the Swagman Titan hitch-mounted bike rack. So the rack that we have here today can hold up to a total of two bikes. However, if you need to carry more, there's a four-bike version available as well. With that being said, one of the things I noticed right off the bat, it's really convenient. Even with our bike loaded, we're still going to be able to open up our trunk.
Thule Hitch Bike Racks Review - 2013 Ford Fusion
Today, on this 2013 Ford Fusion, we're going to be test-fitting the Thule Roadway 2 Bike Rack, part number TH912XTR. As you can see, we already have a bike installed on the rack. Let's go ahead and take a closer look, and show off some of those features. Now the bike actually attaches to the rack. You're going to have three points of contact with your bike's frame. You're going to have two straps up top, here, as well as one strap off to the side, here.
Thule Hitch Bike Racks Review - 2013 Ford Fusion th9029xt
Today in this 2013 Ford Fusion we are going to be testing the Thule Vortex 4 bike rack. Part number TH9029XT. As you can see we already have a bike installed on the rack. Let's go ahead and take a closer look at that and show off some of the features. As you can see, the bike is actually held to the rack using 3 points of contact with the bike's frame. We have 2 straps up top here, as well as one up to the side here, which is going to act kind of like an anti-sway strap, keep it from going back and forth too much to hit either the bike rack, or the bikes in front of it. Let's go ahead and take the bike off and set it aside. Once you remove the straps it's a good habit to actually put them back in place afterward, because you don't want the straps to ...
Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion we're going to be doing a test-fit of the Saris Freedom SuperClamp. This will be your platform-style, 2-bike rack, part number SA4025. As you can see, this rack is going to have an inch and a quarter shank that's going to attach to our class one and two hitches as well as it does come with your two inch adapter for your class three hitches. It also is going to attach to any of our receivers using an anti-rattle bolt that you can see down there on the bottom. That's going to help to alleviate a lot of the sway, rattle, and wobble that you would normally have and act more as one item rather than the bike rack just being a standalone item on its own. When it's tied into the vehicle, you'll get more movement out of the vehicle than you would the rack. Let's start off by a few measurements.
Saris Axis Hitch Bike Racks Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion. We're going to be doing a test fit of the saris axis. This would be your hanging style 2 bike rack, part number SA832. Again, that's part number SA832. As you can see, we've already got it up here on our vehicle in place on a rack, so you can see what it's all going to look like once it's fully assembled on the back of your vehicle. This rack does attach with an inch and a quarter shank and also comes with a 2-inch adapter for your class 3 hitches. Inch and a quarter shank for class one and two hitches.
Saris Bike Porter Hitch Bike Racks Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion, we're going to be doing a test fit of the Saris Bike Porter hanging style four-bike rack. As you can see, we've already got our bike up here on our platform so you can see what it's going to look like once you have it fully assembled and in place on the back of your vehicle. It's going to be part number SA404B. Let's go ahead and talk about the inch and a quarter shank that's going to attach to our inch and a quarter receiver. Note that this bike rack does also come with your two-inch adapter for your class three receiver as well, but this inch and a quarter will work with your class one and two. Just keep in mind that with your class one, you're only going to be able to carry up to two bikes, just for the weight restrictions on the receiver. Let's get a few measurements out of the way, starting off with our closest distance first, which would be from that back side of the bumper to the front side of the rack here, at about five and a half inches. Our overall distance that we've added to the back of the vehicle will be about thirty inches, and our rear ground clearance at about eight and a half inches.
Swagman Hitch Bike Racks Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion, we're going to be doing a test fit of the Swagman Trailhead hanging-style, four-bike rack, part number S63380. This bike rack is going to come with your 1 1/4 inch shank as well as a 2 inch adapter. You're 1 1/4 inch shank will be good for your class one and two hitches, just keep in mind, with your class one you're only going to be able to carry up to two bikes and not the full four. With the class two, you can carry all four. It will fit your class three as well, with that 2 inch adapter that will also come with the bike rack. You see their bike up here on the rack You can see what it's going to look like once you have it fully assembled and on the back of your vehicle. We'll start off by getting a few measurements.
Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion, we'll be test fitting the Yakima DoubleDown Ace 4-bike carrier for 1-1/4" and 2" hitches, part number Y02451. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install the attached pin. We'll move to the rear of the shank and tighten the hand knob, securing our bike rack to our vehicle, and engaging our anti-rattle device. Now we'll go over a few clearance measurements. We have about 8" of ground clearance. The closest point of our carrier to the rear of the vehicle is about 1".
What our customers are saying:
"I purchased a hitch, wiring harness, bike carrier and bike adapter for a newly redesigned 2007 Hyundai Santa Fe. Everything arrived in a matter of days and either fit or worked perfectly. Great prices, quality and service support. Rest assured, I'll be recommending you to anyone who asks. Thanks again."