Best 2017 Toyota RAV4 Trailer Hitch Ball Mounts

Excellent hitch receiver. Perfect fit, nice welds, easy install.

Worked as expected

The welding splatter found its way to the hitch pin hole and it took me some time with a Dremel to clean it out so the hitch pin would slide in.

Each edge of the hitch receiver shipping carton was pierced by mounting brackets, but no damage fortunately. Consider adding another layer of cardboard padding?

I have a 2004 RAV 4 and I was trying to get my ball away from the spare tire carrier. I think I probably would have been fine with the next size (shorter) ball mount and still got the job done. The good news is that with the 2 inch drop, I can open the rear door and it just rubs the seal at the bottom of the door a little bit, but I can still easily open the door. I did not want to drop the ball any lower, So this works out well for my rig.

Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.

Wonderful product. I had the hitch installed in 10 minutes. The wiring was a little more tricky because it required running a power wire all the way to the battery. I towed my trailer from Florida to Tennessee and back. Etrailer is still wonderful to deal with as they always have been in the past. My hitch came in a couple of days. I wouldn't think of ordering from any one else.

My order was missing installation parts, but the etrailer team were quick to correct the issue. Even without a lift, I was able to install the receiver and brake light cable quickly, thanks to their extensive video libray.

Everything came as described, and I am so happy with the products and service! etrailer.com is my definite go to!!!

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

Joann came through on this order. Five stars for her.

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

The 5 inch rise on this hitch ball mount was perfect for my 07 Toyota Rav4. The rear door opens to the side on this year Rav4 and it has plenty of clearance. I tow a 16 ft aluminium boat and this 5 inch rise ball mount works perfectly on the Rav.

Ordered this product for my 2015 Rav 4 and it has worked perfectly. I tow a trailer about 4 times a week and needed a hitch that would step the ball up to make the trailer level and allow the wheel to be lowered without manually lifting the trailer myself. Product came quickly and was advertised. Would order again if I needed one for another vehicle.

The Curt Class II Drawbar with a 5" rise very nicely solved my problem when hooking up my two trailers to my Rave 4. The trailer jack was as low as it could go when it rested on the ball in my of setup. Now I have plenty of jack room to hook up and unhook. Thanks for your excellent product and service. Ralph E.

I am very happy with my trailer hitch receiver from etrailer. I installed one on my 2011 Toyota rav4 for towing a small teardrop trailer I made during the pandemic. I also purchased a wiring harness to power the trailer lights from etrailer and after some doing have it working well. The cost of doing it myself was a small fraction of having the dealership do the work. The hitch receiver is easy to install as there are pre drilled holes to receive bolts in the frame. The wiring is a bit more complicated but I did it. God bless online videos. I'm happy with the results.

Didn't realize the ball was permanently attached to the hitch, as I bought this with the intention of flipping it and using it as a rise hitch. 2" drop too low for my application. Not really worth the hassle of returning, and I guess the fault lies with me.

Purchased the hitch and wiring kit for my 2012 Rav4. I was going to have a garage do the installation, but then decided to do it myself. The written directions and the available videos made the installation of the wiring and the hitch a relative breeze - and I'm not particularly handy. My hitch lined up with the bolt holes perfectly and the wiring was without drama. All in all a good purchase and I was very happy dealing with etrailer. Hooked up the trailer today and all works as it should.

I have a 2015 Rav 4 and I ordered the wiring harness with the hitch, ball and receiver and it arrived the next day undamaged. I am happy with the quality of this product.

The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.

This slightly longer than average bar was perfect for my application. The drop length was perfect also for the application. As usual, eTrailer's site and retail experience was first rate. Lots of info and specs (and videos) available makes it easier to get that piece of mind knowing that what you needed was what you ordered.

Well made!

I recently purchased a class III Curt hitch, mount, ball, wiring harness and hitch pin for my 2011 Toyota Rav 4. The installation was as described, straight forward and easy. The instructions were easy read and matched the vehicle I have. Everything fit together exactly with no modification needed. Shipping was directly to my door. The unit was undamaged and everything was shipped all in the same box. I have used my hitch several times, and although I an new to towing, I look forward to years of use. I did have to make a quiet clamp for the banging mount with an empty trainer, but from what I understand, this is common to all hitched.

excellent ease of installation....

It's a receiver hitch! It's well built, the welds are clean and it fits the trailer hitch. Not much else to say!

I have not used it yet but looks to be good quality and I'm sure it will be fine

Exactly what I needed. All my previous SUVs used 2x2 hitch mounts which now are useless.So I decided to gift them to my son. The hitch mount is well made. etrailer is fast and very easy to find exactly what you need at a fair price. Customer service is friendly and helpful.

The etrailer.com site was easy to navigate and I found the right draw bar for my new Rav4. The order was processed very quickly and delivery was within just a few days of the order. Prices are fair and customer service was great. Thanks for a great online experience!

Received it exactly when they said it would arrive. Works great. Exactly as described.

The equipment was top rated. I do like the lock option. The only negative I would mention is, for my vehicle, the mechanic needed to weld one side of the attaching tow bar because the dimensions didn't quite match a Toyota RAV4.

Great Product. Installation was straightforward and took about an hour. The longest part was cleaning the rust out of the weld nuts with WD-40 and the tube brush. Once they were cleaned installation was simple.

Arrived quickly and functioning perfectly

tl;dr good experience with warts. The etrailer-branded ball mount kit I ordered was back-ordered for a month, which was fine. Eventually Ashley E told me it would be a _second_ month. Not fine. She helped me configure a new order of third party parts. Shipped in one day. Great! Not great: Parts were just thrown in a box with no protection. UPS did their usual thing. Paint was chipped in a couple of places; would surely rust. I'll shoot these spots with some spray paint before installation. Hope that's a fix. I can't afford to diddle with a return.

Good fit, well made, worked well on first use, ball attached easily, was the reciever I was looking for.