# 1
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K
product shown has new top pins which were not included, also the packaging was 1/3 destroyed. My old pins do not have grease fittings, so no way to grease the Equa-Flex devices.
I bought these to replace the worn-out ones I had on my trailer. It was approximately two hours install per side. I purchased all new standard bolts with never fail bushings along with all new straps. I was told I could replace the brass bushings with never fail bushings when I purchased the set. When I received equa-flex equalizers I noticed they all had pressed in brass bushings so I was not able to use the never fail bushings. I had to go down to the local trailer store to to purchase six wet bolts. All in all I am happy I just have six extra bolts and six extra never fail bushings.
# 2
Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
Shipped and received as ordered and describe. Only missing 1 lock nut for bolt that went on left side to frame. Installed myself and took about 3 hrs to complete installation and run air lines and gauge. Only thing there was no installation instructions for torquing nuts. Will see how it handles Wednesday 5/30/24 on getaway trip to see Micky and Minnie. My fifth wheel is 44 ft long Forrest Glen Wildwood Heritage Glen Elite 16,000 lbs. Note: Had to modify the piece that slides up into frame mine had a reinforced piece welded inside on frame had to notch each side to slide another 1/4 “ up for blot to go though hole.
# 3
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
Replaceing damaged parts on my flat trailer after the Campfire. Axles springs hangers etc were compromised by the tire’s catching fire. etrailer had all of the exact same parts at great prices. All shipped to my house. My trailer will soon be back in commission basically had to replace everything under the frame. Thanks etrailer
I recently replaced my 1/2 ton truck with a 3/4 ton truck. In order to hook up to my existing fifth wheel camper, I had to raise my camper. To do this, my brother and I moved the axles from the top of the leaf springs and attached them under the springs. This kit made it very easy to do this. We torched off the old u bolts and used this set as a replacement. The quality of this kit was very good. Hard to get too excited about u bolts but I would purchase this again if I had to do it all over again. I was able to gain about 5 1/2 inches by flipping the axles. Here is a before and after.
# 4
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 6,000 lbs
my only complaint was that 1 bolt on each side did not fit so i don't have grease fittings on those but being my camper is a 2013 i was not surprised. my old ones were blown right out. the red looks sweet in between the tri-axle also. over all i am happy with these. they came factory on my road warrior.
They function good. Just very wide and rub at the mounting points. Would have went another route if I would have been more knowledgeable.
# 5
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
We broke down on a Saturday near Cincinnati and couldn't find any parts, so I called etrailer and luckily they had a wet bolt kit in stock. They shipped it next day, which means business day, next day, aka Tuesday " thanks UPS ". I had the kit installed by a mobile mechanic and I was back on the road by 3:30pm.
My wife and I installed the Dexter EZ Flex Suspension kit on Grand Desin Imagine RV Thursday, July 18th, 2024. It took us about 6 hours but some of that time was getting our RV trailer jacked up and secured with jack stands. After the installation we greased all the wet bolts and the fittings on the EZ Flex equalizer. One problem we have is there is one Wet bolt that will not take grease, after several attempts. All others accepted grease but this one. We’re wondering if this one wet bolt is bad.
# 6
Dexter Trailer Springs Over-Under Conversion Kit
Great kit! Installed this on my 1995 Jayco Fifth Wheel and it really improved the ride height with my truck. It’s been on 2 round trips from Texas to Montana since and many other trips locally with no issues.
Great product. Added close to an extra 5 inches of ground clearance to my trailer. And it was a simple, painless install. I had a friend tack weld the new spring saddles about a week after I did the install, mostly because this trailer is used for cross-country trips. The instructions suggested the welds but did not require them. I had them done just to be safe.
# 7
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
I upgraded my leaf springs to 4000lbs springs and needed longer axle U bolts and Quinn at etrailer was helpful getting the correct bolts headed my way.
Under “features” the description says for 1.75” or 2” leaf spring, and calls out an item number for the plates that is for 2” springs. The plates in the Dexter packages are for 1.75” springs only, and do not fit 2” springs.
# 8
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
Quick delivery and parts were as they should be. Customer service was top shelf.
These products are what they are advertised as. Great quality and USA made. I buy from e-trailer because of the great people, fair pricing, shipping is always prompt, and the shipping prices are always reasonable. Thanks eyrailer
# 9
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
Customer service is impeccable and helpful. The length of the lift fit our mount but the wholes for two bolts didn’t line up. Our trailer has a Lippert Axle and we had to drill two holes to fit the bolts properly. I contacted Lippert and they no longer sell the lift kits. Aside from going to a shop and paying over $1k for someone to fabricate a solution for us; this is the route we chose.
Great product. Added height to the trailer to increase the height adjustability of the tongue to prevent hitting the top of the bed rails.
# 10
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
Order received was missing significant pieces as per my notification to customer service. Looks like all parts, nuts bolts flanges were all packed loose in the box, UPS destroyed the package and reboxed, resulting in missing items. Attached picture is what I received.
Glad I chose etrailer for my purchase will definitely buy from them again, I had a old boat trailer that was given to me from a friend will convert the boat trailer into a BBQ concession trailer later with heavier axles and springs now using the axles and springs from that trailer to the new one for my UDS smokers, I have 5 of them to mount to the new one making them dedicated to that trailer.
# 11
Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 7,000 lbs
I love this suspension its quiet and the handling and ride is the best I have ever used on a trailer. Gonna buy another set for my gooseneck trailer. Will never go back to leaf springs!
I used these to replace the leaf springs and equalizers on a 20’ gooseneck cattle trailer that I rebuilt. The ride is great and the usual rattling and clanging of the trailer going down the gravel road is gone. So far I am very happy with the ease of installation and the performance of the suspension. I guess only time will tell about the durability of the rubber components in the long run.
# 12
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
Very easy to install plan taking big trip in a few months can’t wait to see how they handle. Update to follow.
# 13
Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 14,000 lbs
Been great so far..fabbed removable axle system with the timbrens
Seems like a great product and service was excellent. UPS lost one of the three parts and was a week long in delivering it, and then said that it was because it was packaged poorly from etrailer. I used a 4x6 steel rectangular tube spacer to get my trailer back up to the original height. Seemed pretty straight forward, but it would be nice if the system could be designed so the user doesn't have to cut the mounting brackets off the axle and re-attach the Timbren brackets.
# 14
Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
Installed these with the Dexter Bronze Bushings and Lippert AP wet bolt kit. No more clanking and banging from the trailer going down the road and especially making tight turns.
I saw these on a Facebook RV site and after doing some research, I decided purchase them to help lessen some of the road shock from the terrible U.S. roads. As we know the quality control on RV construction is not the best. I figured anything I could due to prevent some of the road stress on the camper, was a good thing. I was very happy with the quality of theses equalizers, they are really a heavy duty product. I had them installed at the tire dealer while he was putting new tires on the RV. This saved some labor costs as the already had the tires off. I am a DIY person, but I did not feel comfortable dealing with the tension on the leaf springs. I did purchase wet bolts and bigger brackets to go with these, the customer service rep at etrailer help me select all the parts to make sure they were compatible with my camper.
# 15
Leaf Spring Center Tie Bolt with Nut, 3/8" x 4"
Just what I was looking for to add another 1 or 2 leaf spring to the springs on the truck. Great service, fast shipping. great company to do business with.
You have a great inventory of parts. I was surprised that you had what I needed.
# 16
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
Quality and fit are good. The paint is thin so I painted them because they are going on a boat trailer.
Worked great, paint is holding up, hardware was good quality, bolted right in…no issues, hold load at least as good as factory springs. Would recommend and buy again!!
# 17
Equalizer for 2-1/2" Wide Slipper Springs - LH or RH - 18-3/8" Long - 1" Center Hole
part came just as described and exactly what i needed. thank you
It is an excellent product, still going strong.
# 18
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3-1/2" Axles
Great product! Excellent installation instructions (for the DIYer inclined to step up!). Excellent support... I ordered the wrong kit (my axle size was different) but customer service worked with me to correct it. I installed the shocks incorrectly but the service team quickly pointed out that I misread the instructions. I have a 12,000 pound, 38' trailer with a lift on the back for my 900 pound motorcycle. I've put around 7500 miles on it including a couple times across the Rockies and absolutely love the handling. Self installation is not for the feint of heart but it saved me around $10k labor not having a dealer install it.
With all the proper tools, the install was only like 4 hours. I did this outside on a gravel driveway and then took to my local fire department where it was level to install the shocks. The ride difference was noticed immediately.
# 19
Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole
Trash !!!! 4 equalizers and just one it’s holding the weld now I’m losing money because my trailer suspension its not functioning
These fit perfectly on my triple axle Kaufman trailer where I replaced all 4 of them. I got some commercial quality spray paint and painted them black. I'll also include some pictures of my old ones that were original with the trailer. You can see they definitely needed to be replaced! I always use etrailer for my trailer parts. Everything is good quality, fits perfectly, and arrives on time.
# 20
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
Easy Installation. I'm expecting them to act as shock-absorbers, and I haven't experienced any adverse handling issues, so I guess they're working. I haven't noticed any difference in handling, so I guess that's OK. I hoped for additional capacity, too, and that's hard to measure. Sorry this isn't more definitive, but I'm satisfied that they are helping.
These are great. Exactly what my trailer needed. I had to cut off about a 1/2 inch off the top to make them fit/work for the preload on the instructions, but it was easy to cut/saw with a good bread knife and they made the difference I was expecting.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."