Most Popular Wheel Well Release for 2015 GMC Sierra 2500

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I did the install myself on a 2019 GMC 2500 Short bed. I watched several videos before. I did not remove either mud shield or cut out/remove the heat shield. I chose not to install the chain holders since my Andersen Hitch has it's own tiedown bracket. My bed has a spray liner and therefore the edge covering would not fit the newly cut edges around the hole opening. So be sure to paint the exposed metal. In one of thg he videos a tech use a predrilled board as a guide during the drilling of the bed hole. This was a great idea. Since I chose to keep the heat shield installed I had to lift the main unit into place by sliding it up between the gas tank and rear differential unit. I think it would have been very helpful to have a tools required list before I started. Also, the tip about cleaning out the powdercoated threads was very good idea. Preptime, tapping threads, install and cleanup (tool put away) was over 6hrs....and I skipped a lot of disassembling a n.v d reassemble steps. Everything was straight forward and understandable. A lift would have been great but I used rear ramps which was enough. Make sure you get a step ladder for bed entry now. I expect it to work as expected. Seems very solid!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

2021 Sierra 2500 standard box. Item arrived pretty quick with all parts included and no damage. Instructions for the install are, in my opinion, not very detailed and left me having to figure several things out on my own. Biggest pain was having to drop the fuel tank a few inches to access the hole in the driver-side frame rail to fish wire the one bolt for the side plate. Unsure why this info was missing as I would imagine anyone installing this on the same truck would have the same issue of not having enough clearance for the fish wire procedure. The front and rear rails are 0.25” in length different and are not labeled - be prepared to measure and appropriately install in the correct position with the holes closer to the bottom (this is poorly referenced in the instructions and leaves additional room for error and time). The install took me about 7 hours (no help). Finished product is nice and sturdy. The ball ends up being about 4-5” forward the rear axle. I tried to find this info prior to purchasing, but could not. I use an extang hard tri-fold tonneau cover that does not flip fully up toward the cab and was concerned I would have to remove each time I hooked up a gooseneck. It appears that I will have to remove for most applications due to clearance issues, so less than ideal. Operates as intended and should bring many years of trouble free service.

Accurate install directions, fantastic fit and operates perfectly for my 5th wheel RV

Click to Enlarge

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

2021 Sierra 2500 standard box. Item arrived pretty quick with all parts included and no damage. Instructions for the install are, in my opinion, not very detailed and left me having to figure several things out on my own. Biggest pain was having to drop the fuel tank a few inches to access the hole in the driver-side frame rail to fish wire the one bolt for the side plate. Unsure why this info was missing as I would imagine anyone installing this on the same truck would have the same issue of not having enough clearance for the fish wire procedure. The front and rear rails are 0.25” in length different and are not labeled - be prepared to measure and appropriately install in the correct position with the holes closer to the bottom (this is poorly referenced in the instructions and leaves additional room for error and time). The install took me about 7 hours (no help). Finished product is nice and sturdy. The ball ends up being about 4-5” forward the rear axle. I tried to find this info prior to purchasing, but could not. I use an extang hard tri-fold tonneau cover that does not flip fully up toward the cab and was concerned I would have to remove each time I hooked up a gooseneck. It appears that I will have to remove for most applications due to clearance issues, so less than ideal. Operates as intended and should bring many years of trouble free service.

Have not attempted install yet but looks well made and straight fowrard instructions

I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I did the install myself on a 2019 GMC 2500 Short bed. I watched several videos before. I did not remove either mud shield or cut out/remove the heat shield. I chose not to install the chain holders since my Andersen Hitch has it's own tiedown bracket. My bed has a spray liner and therefore the edge covering would not fit the newly cut edges around the hole opening. So be sure to paint the exposed metal. In one of thg he videos a tech use a predrilled board as a guide during the drilling of the bed hole. This was a great idea. Since I chose to keep the heat shield installed I had to lift the main unit into place by sliding it up between the gas tank and rear differential unit. I think it would have been very helpful to have a tools required list before I started. Also, the tip about cleaning out the powdercoated threads was very good idea. Preptime, tapping threads, install and cleanup (tool put away) was over 6hrs....and I skipped a lot of disassembling a n.v d reassemble steps. Everything was straight forward and understandable. A lift would have been great but I used rear ramps which was enough. Make sure you get a step ladder for bed entry now. I expect it to work as expected. Seems very solid!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I did the install myself on a 2019 GMC 2500 Short bed. I watched several videos before. I did not remove either mud shield or cut out/remove the heat shield. I chose not to install the chain holders since my Andersen Hitch has it's own tiedown bracket. My bed has a spray liner and therefore the edge covering would not fit the newly cut edges around the hole opening. So be sure to paint the exposed metal. In one of thg he videos a tech use a predrilled board as a guide during the drilling of the bed hole. This was a great idea. Since I chose to keep the heat shield installed I had to lift the main unit into place by sliding it up between the gas tank and rear differential unit. I think it would have been very helpful to have a tools required list before I started. Also, the tip about cleaning out the powdercoated threads was very good idea. Preptime, tapping threads, install and cleanup (tool put away) was over 6hrs....and I skipped a lot of disassembling a n.v d reassemble steps. Everything was straight forward and understandable. A lift would have been great but I used rear ramps which was enough. Make sure you get a step ladder for bed entry now. I expect it to work as expected. Seems very solid!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great

The hitch was delivered quickly. etrailer sent frequent updates, letting me know exactly where my order was.

Delivered on time and all parts intact. Installation was as described . The how to video was a help. Installed in about 3 hours by myself. An extra set of hands would help with center section staging and placement but is easily done by one person as well. Installation complete and looks great