# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
At 68 yrs old, just single-handedly installed the 50 pound Curt hitch receiver on my 2016 Honda Pilot, using two jack stands and the vehicle's car-jack to position it correctly and hand thread the 6 bolts. Made a bit more room for myself by first lifting the back of the vehicle onto a makeshift ramp consisting of two layered 2x6 board. Also first tried to hand tighten the bolts before placing the hitch under the car and found I had a fair bit of rust to work through with rust blaster and wire brush. Instructions were clear and accurate. One tip, do the center bold on the muffler side first (to be able to slide the unit between the muffler and the frame, then the center bolt on the driver's side second. From there, it is a breeze. Took me an hour to get rid of the rust inside the welded bolts, and then an hour to install the hitch.
# 2
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Everything was delivered as promised. harness was easy to install. will shop here again.
Works great!
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
The item arrived on time and was exactly what I needed. E Trailer is a great place to fill all my towing needs.
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
# 4
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Everything worked exactly as stated. Very easy to install. The videos are great. Shipping was fast. Very happy!!
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 5
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Easy installation, low profile and excellent quality. Exactly what I was looking for in a hitch receiver for our 2021 Pilot.
This was the perfect fit for my Honda Pilot. Installation was very easy; no mistakes were made! The Curt Towing Starter Kit Trailer Hitch Ball Mount was the perfect match for the Trailer Hitch receiver, as it came in a plastic box that fit perfectly in the small stowable compartment in the back of the Honda. Everything stays in the car, tucked away neatly in the plastic box.
# 6
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Great instructions, very timely delivery!
very high quality and fits perfectly.
# 7
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Everything was delivered as promised. harness was easy to install. will shop here again.
Works great!
# 8
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I ordered and received the ball mount and sway bar together. They were received very promptly and in excellent shape. They are very heavy, i.e., heavy duty. The bracket that was fitted to the trailer was about half a screw wider than optimal size for my smallish trailer but did fit. Installation was easy. The self-tapping screws functioned well. All-in-all, a 10 out of 10 experience.
# 9
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 10
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
I bought Tow Package Wiring Harness W/ 7-way Connector (118265), Curt Class III Ballmount -2" ball-2" Drop (C45036), and Adapter 7 To 4 W/tester & Cover (47345) from etrailer for my Honda 2014 Pilot. I ordered Friday and arrived next Monday with free-shipping offer. Installation was very easy with all instruction videos and photos (less than one hour). Tester function on the adapter (7 pole to 4 pole) was very useful to check if the installation was correct. Everything seemed working fine. Soon, I need to rent a trailer which has 4-pole connector. Etrailer price of the adapter is much cheaper than [theirs]. Furthermore it has the tester function which gave me assurance my newly installed equipment was ready to be used (No surprise at [their] store with non-working trailer wiring).
As advertised; time will tell how well this stands to the New England weather.
# 11
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
I bought Tow Package Wiring Harness W/ 7-way Connector (118265), Curt Class III Ballmount -2" ball-2" Drop (C45036), and Adapter 7 To 4 W/tester & Cover (47345) from etrailer for my Honda 2014 Pilot. I ordered Friday and arrived next Monday with free-shipping offer. Installation was very easy with all instruction videos and photos (less than one hour). Tester function on the adapter (7 pole to 4 pole) was very useful to check if the installation was correct. Everything seemed working fine. Soon, I need to rent a trailer which has 4-pole connector. Etrailer price of the adapter is much cheaper than [theirs]. Furthermore it has the tester function which gave me assurance my newly installed equipment was ready to be used (No surprise at [their] store with non-working trailer wiring).
As advertised; time will tell how well this stands to the New England weather.
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
I bought Tow Package Wiring Harness W/ 7-way Connector (118265), Curt Class III Ballmount -2" ball-2" Drop (C45036), and Adapter 7 To 4 W/tester & Cover (47345) from etrailer for my Honda 2014 Pilot. I ordered Friday and arrived next Monday with free-shipping offer. Installation was very easy with all instruction videos and photos (less than one hour). Tester function on the adapter (7 pole to 4 pole) was very useful to check if the installation was correct. Everything seemed working fine. Soon, I need to rent a trailer which has 4-pole connector. Etrailer price of the adapter is much cheaper than [theirs]. Furthermore it has the tester function which gave me assurance my newly installed equipment was ready to be used (No surprise at [their] store with non-working trailer wiring).
As advertised; time will tell how well this stands to the New England weather.
# 13
etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
Everything was delivered as promised. harness was easy to install. will shop here again.
Works great!
# 14
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
I bought Tow Package Wiring Harness W/ 7-way Connector (118265), Curt Class III Ballmount -2" ball-2" Drop (C45036), and Adapter 7 To 4 W/tester & Cover (47345) from etrailer for my Honda 2014 Pilot. I ordered Friday and arrived next Monday with free-shipping offer. Installation was very easy with all instruction videos and photos (less than one hour). Tester function on the adapter (7 pole to 4 pole) was very useful to check if the installation was correct. Everything seemed working fine. Soon, I need to rent a trailer which has 4-pole connector. Etrailer price of the adapter is much cheaper than [theirs]. Furthermore it has the tester function which gave me assurance my newly installed equipment was ready to be used (No surprise at [their] store with non-working trailer wiring).
As advertised; time will tell how well this stands to the New England weather.
# 15
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Easy installation, low profile and excellent quality. Exactly what I was looking for in a hitch receiver for our 2021 Pilot.
This was the perfect fit for my Honda Pilot. Installation was very easy; no mistakes were made! The Curt Towing Starter Kit Trailer Hitch Ball Mount was the perfect match for the Trailer Hitch receiver, as it came in a plastic box that fit perfectly in the small stowable compartment in the back of the Honda. Everything stays in the car, tucked away neatly in the plastic box.
# 16
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
Everything was delivered as promised. harness was easy to install. will shop here again.
Works great!
# 17
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 18
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack. But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !
# 19
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
# 20
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Exactly as described. Well made.
Great deal on this, it was almost $20 more locally. Received it fast, it was packaged very well. This looks really clean on my vehicle and I never have to worry about "did I tighten the ball enough".
What our customers are saying:
"Excellent service both on the phone asking for information and the web. Look forward to recieving the item.... Thanks"