bing tracking image

Best 2013 Dodge Journey Bike Racks

change vehicle


Bike Rack Videos

Yakima StickUp 2 Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Yakima Stickup two bike hitch-mounted folding bike rack for both inch and a quarter and two inch hitches, part number Y02420. Now with the included adapter already installed on our shank well go ahead and slide the bike rack shank into the hitch, line up the hitch pin hole and install and tighten down our anti-rattle bolt. Now that the bolt is tight, our bike rack is secured to the vehicle. At this point we can go ahead and give you a few measurements. Our ground clearance here at the bike rack is 12 inches, and with the platform up from the closest point of the bike rack to the back of the vehicle is five and a quarter inches. Well now go ahead and unfold the bike rack platform and open our cargo door.



Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Apex Swing four bike carrier, part number TH9027. To begin our test fit, using the included two inch adapter, well slide the bike rack shank into the hitch, line up the hitch pin hole and allow the integrated locking hitch pin to fall into place. We can then move to the anti-rattle knob where well tighten it down, securing the bike rack to the vehicle. At this point we can go ahead and give you a few measurements. Our ground clearance here at the bike rack is 12 inches, and from the closest point of the bike rack to the back of the vehicle here at the anti-rattle knob is four inches. Well now go ahead and pull the hitch switch here at the top of the mast to bring out the dual arms, where we can then undo the straps to expose our cradles.



Softride Dura Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Softride Dura parallelogram, part number SR26247. Were going to begin our test fit well simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. At this point well go ahead and give you a few measurements. Our ground clearance here at the bike rack is 12 inches, and from the closest point on the bike rack to the back of the vehicle, here at the mast is five and a half inches. Well now go ahead and load our bike.



Kuat Sherpa Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Kuat aluminum two bike carrier, part number S102. This is the Kuat Sherpa. To begin our test fit, using the adapter for the two inch hitch, well slide our bike rack shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then move to the back of the shank where well tighten the knob, securing out bike rack to the vehicle. We can now go ahead and give you a few measurements. Our ground clearance here at the bike rack is 16 inches, and from the closest point of the bike rack to the back of the vehicle is six inches.



Kuat NV Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Kuat NV, part number N101. To begin our test fit well slide the bike rack shank into the hitch, line up the hitch pin hole and install the hitch pin. We can then move to the back of the shank where well tighten the knob securing our bike rack tot eh vehicle. With our bike rack secured well go ahead and give you a few measurements. Our ground clearance here at the bike rack is 12 inches, and from the closest point of the bike rack to the back of the vehicle is seven inches. Well now go ahead and unfold the bike rack platform and open our cargo door.



Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Yakima Doubledown Ace 4 part number Y02451. To mount our carrier to the vehicle, well insert the shank of the carrier into the receiver tube of the hitch. Well line up the hitch pinholes and secure the bike rack with the safety pin then well come back and use the hand knob at the base of the carrier to tighten up the anti-rattle device. Now well go over a handful of clearance measurements. Weve got about 11 inches of ground clearance and 6 inches of clearance between the closest part of the vehicle and the closest part of the carrier. Overall, weve added about 13 inches of length to the rear of the vehicle with the carriers arms folded down.



Thule Vertex 4 Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Vertex 4 Hitch Mounted Bike Carrier, part number TH9029. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Next well go over a handful of clearance measurements. Weve got about 11 inches of ground clearance and 5 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 15 inches of length to the rear of the vehicle with the carrier arms folded down.



Thule Parkway 2 Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Parkway 2 Hitch Mounted Bike Carrier, part number TH958. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Next well go over a handful of clearance measurements. Weve got about 11-1/2 inches of ground clearance and 3-1/2 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 23 inches of length to the rear of the vehicle.



Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Hitching Post Pro Hitch Mounted Bike Carrier, part number TH934XTR. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down with a wrench. Next well go over a handful of clearance measurements. Weve got about 11 inches of ground clearance and 7-1/2 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 18 inches of length to the rear of the vehicle.



Thule Doubletrack Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Doubletrack Platform Style Bike Carrier, part number TH990XT. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Next well go over a handful of clearance measurements. Weve got about 10-1/2 inches of ground clearance and 5-1/2 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 12 inches of length to the rear of the vehicle with the carrier arms folded down.



Thule Domestique Roof Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Domestique Fork Mount Bike Carrier, part number TH513. To mount our carrier to the vehicle well set it up on top or our load bars. Well fit the front clamp around our front bar and use an Allen key to tighten down the two Allen head bolts. At the back, well fit the clamp around the underside of our rear bar and again, use an Allen key to tighten the clamp around the bar. Then we can reinstall our skewer. Now we can go ahead and grab our bike.



Thule Apex 4 Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the Thule Apex 4 Hitch Mounted Bike Carrier, part number TH9025. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Then well let our automatic hitch pin close on the hitchs hitch pin hole. Then well use the hand knob at the base of the bike rack to tighten the anti-rattle device. Next well go over a handful of clearance measurements. Weve got about 11-1/2 inches of ground clearance, 3 inches of clearance between the closest part of the carrier and the closest part of the vehicle, and overall weve added about 16 inches of length to the rear of the vehicle with the carrier arms folded down.



Swagman Titan Hitch Bike Rack Review - 2013 Dodge Journey

Today on this 2013 Dodge Journey well be test fitting the Swagman Titan 4 Hitch Mounted Bike Carrier, part number S63410. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Now well go over a handful of clearance measurements. Weve got about 11-1/2 inches of ground clearance and 9-1/2 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 22 inches of length to the rear of the vehicle with the carrier arms folded down.



SportRack EZ Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the SportRack 2 Hitch Mounted Bike Carrier, part number A30901. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Next, well go over a handful of clearance measurements. Weve got about 11-1/2 inches of ground clearance and 9 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 28 inches of length to the rear of the vehicle.



SportRack Escape 3 Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the SportRack Escape 3 Hitch Mounted Bike Carrier, part number A30403. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Next, well go over a handful of clearance measurements. Weve got about 11-1/2 inches of ground clearance and 3 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, weve added about 12-inches of length to the rear of the vehicle with the carriers arms folded down.



RockyMounts TieRod Roof Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey well be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. To mount our carrier to the vehicle well set it up on top of our load bars. Well situate the head of the carrier over our front bar and feed the rubber coated steel straps around the bar and back into the head. Well then use an Allen key to tighten the straps down and then we can reinstall our cover. Before we move to the rear attachment point we want to make sure that our skewer is unlocked and open here at the front. At the back, well fit the clamp around our rear bar and use the wing nuts to tighten down the clamp onto the tube bolts.



Pro Series Q-Slot Hitch Bike Rack Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey, we'll be test fitting the Pro Series Q Slot Platform Style Bike Carrier, part number PS63134. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin hole and then secure our bike rack with a standard 5/8-inch pin and clip. Next, we'll go over a handful of clearance measurements. We've got about 11-1/2 inches of ground clearance and 8 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, we've added about 26 inches of length to the rear of our vehicle.





2013 Dodge Journey Bike Rack Questions