Best 2007 Volvo V70 Bike Racks

I had a great experience! I ordered the bike rack Monday afternoon, it arrived the next day! I put it on the car that night. A 24-hr cycle of happiness! Pun intended! Thanks guys!

great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!

This is definitely more of a 2 bike carrier vs 3 bikes. I had to take the front wheels off two bikes to get three bikes on this carrier. Also, it rubbed the paint off on the trunk of my Subaru legacy.

Way too light duty for what is advertised. It seemed to be made out of 1/2 inch electrical conduit. I would never put three bikes on that rack. I only had two bikes on the rack. While on trip through Idaho the wind was so strong that one of the bikes partially blew off the rack. We traveled 1,800 miles and upon arriving home I actually sawed the bike rack up and threw it away so that no one else would use it and cause an accident. I've already found a different brand that is HEAVY DUTY and I will stick with that brand.

I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?

Just put it together and that was easy. Still waiting to use it this summer. Expect it to be perfect as I've use an XCT 4 bike rack for 12 years. It's still fine but I don't need to carry that many bikes and wanted a lighter rack.

Rack is very sturdy and heavy duty. Instructions were terrible. Locking hitch pin would not thread correctly and ended up damaging it. Thankfully the threads on rack were fine and I was able to use the non-locking threaded pin. Would like a replacement locking pin ASAP

For the price, it's a good-quality, sturdy bike rack. I have used it about 5-7 times with no issues. I only used it for one adult and two kids' bikes, but I am sure it can handle four bikes as advertised. It's great that the rack folds upwards when it's not required.

This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.

So far so good. The rack wiggles a bit, but that is expected. I have it on my 2007 Corolla and I have hit 65+ on the highway with it and have not had a problem. I would recommend getting a locking pin. The one included is threaded, which aside from security, makes it harder to take the rack on and off. I would also look into a DIY way to secure the wheels better. I am using some bungee straps which do the job no problem. The two bikes I carry are at the racks capacity.

The NA391 roof bike rack is sleek and stylish looking. It's light and seems to be pretty aerodynamic. At the same time, it appears to be pretty sturdy. Once clamped to my INNO roof rack system, I can grab the track of the roof bike rack and pull back and forth enough to rock the whole car without it moving on the roof rack system. I would give it 5 stars but for what I believe is a design flaw that INNO seems to have overlooked. Due to the curvature of the roof on the Tucson that the Inno rack system is mounted on, the front clamp of the bike rack does not sit flat on the INNO crossbars. The bike rack comes with a spacer to use under the rear clamp to level the rack. But the bolts on the clamp knobs are too short to use the spacer. I don't understand how INNO could miss this design flaw in their own product. Even with just the thin strips of rubber spacers on the bottom of the rack on top of the rear crossbar is almost too much for the bolts on the knobs. INNO needs to look into this flaw and correct it.

I like the bike racks…I ordered two for my INNO roof rack load bars…good quality and reasonably easy to install. I did not realize etrailer also carried the same type of bike carrier that will slide directly into the T-Slot track, otherwise I would’ve gotten those instead…Oh well, that’s the way it goes sometimes.

It was supposed to come with 4 small straps and 6 large straps. However, there were only 3 small straps in the package, and the package was very much intact when we received it. The rack fits well in our 2018 Nissan Pathfinder SV. Although, it was so difficult to make 1 adult road bike and 2 kids road bikes to fit. It more comfortably fits 2 bikes to be honest with you. And our bikes are thin and light.

It is a good bike carrier but if I had it to do again I would bite the bullet and buy a trailer hitch for my Jetta and go with a hitch mount. I believe it is more secure.

A very good, inexpensive, lightweight bike rack. Folds nicely and doesn't interfere with the hatch opening on our 2023 XC40. I wouldn't consider this a heavy duty rack, more suitable for short trips to the riding trails. Good for urban living, as opposed to 4 wheeling out to a mountain destination. Several plastic components. Two things I dislike is 1) the hitch pin lock is cheesy plastic, and because of the threading bolt on the rack's hitch, you can't use a sturdier 5/8" locking pin. and 2) the cotter pins should have a small security cable.

I am very pleased with this hitch! Fit my bikes very nicely. Easy to assemble. Rack looks great on my Mazda cx-30. Customer service is very responsive.

Originally I was looking to put a hitch on my 2021 jeep renegade sport for a hitch mount bike rack, after seeing that I would either have to remove seam sealer and drill holes in my rear subframe (this is not a good option living in the rust belt), or remove my entire back bumper off and cut holes in it for the factory style hitch, and still have a rack that is illegal and blocks my license plate/brake lights turn signals I decided to look at different options. A roof rack is a little too high to lift a bike on comfortably. This thule outway platform 2 takes about 10 minutes to install correctly, and is solid and holds the bike securely, and the rack locks to the vehicle, and also the bikes lock to the rack no extra purchases required (comes with 2 keys and plastic spoiler supports). I have driven 80mph over potholes and bumps, also on extreme hills and has held securely.

Pretty straight-forward on how to affix to trunk, any questions are covered nicely throughout the instruction booklets. Once fastened, everything is confidently snug. The only thing I was initially concerned about was the potentiality that the clamps might not fit around my frame (being a thicker-framed MTB). I actually found a YouTube video of somebody reviewing the item and they actually showed some good ideas for how to fit the bike securely to the rack. Once you get that dialed-in, it's as sound as a pound. Haven't had any issues with the rack and don't even worry about it or the bike while driving. Worth the purchase.

Exactly as advertised, transported 2 Trek bikes on on the back of my 2016 Toyota Avalon without issue - travelling from Boston MA to Green Bay WI. Outstanding price buying this item as open-box. etrailer's website is the best I could find on the web with name brand racks, automated compatibility vehicle check, and they they shipped overnight.

This rack fits well on our 2015 Toyota RAV4. There are six attachment points, each with a coated hook on the end to fit around the trunk lid. Once mounted and tightened, the rack is comfortably stable and solid. Bikes are easy to mount as well, with just a few straps. Note that a BMX bike, due to its small geometry, will not fit. Also of note, the hooks on the ends of the two straps which lead out in the 3 o'clock and 9 o'clock positions will chafe the car's paint. I wrapped those in electrical tape in order to minimize the effect. Overall, a good choice for a trunk rack.

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

This is a really good rack. We do a lot of car camping out of our Subaru Outback and I wanted a bike rack that would swing aside so we can raise the hatchback and easily access the camping gear, cooler, duffel bags, etc that we carry in back (see photo). This rack 100% solves that problem. Further, the bike hold-downs are very secure. I use them on their own for shorter trips. For a longer trip or one that may involve a rough road, I supplement them with a ratchet strap, but this is probably just unnecessary paranoia--the hold-downs are excellent. My one heads-up about this rack is that it is heavy. I am a large, strong man and can attach it myself, but I do not look forward to the chore. This is a beefy rack and the weight is unavoidable. I welcome how sturdily-built the rack is. We typically carry my normal bike and my wife's heavy e-bike on it, and the rack is totally up to the job. Highly recommended. I have zero regrets about the purchase and the investment in this rack that will serve us for many years to come. The design is pretty much perfect--I can't think of one thing I would change.

We love our RockyMounts BackStage Bike Rack. The fact that it can hold our two e-bikes and swings out for rear door access makes it perfect for vanlife. Service and communication from etrailer is outstanading!

We have two electric bikes which fit on it perfectly. Very easy to operate and hook up to our Rivian R1S. Highly recommend it!

Easy to assemble, easy to use. Needed a more robust rack to handle the weight of two e-bikes and this model did the trick.

I've got this rack for a Corolla SE 2025. It took me some time to figure out how it would fit. As other reviewers mentioned, the instructions are far from perfect. But as far as the product goes, the rack looks pretty robust and sturdy. The shopping experience with Trailer was very positive. They kept in touch during the process, which I appreciated.

Ordered for a 2024 Honda Accord Hybrid and it fits perfectly. Carrier feels solid and was easy to put together and mount on vehicle.

The only negative is that the "Bike Safety Strap" was not included in the box. Beyond that the rack was in good condition and fit well on my car.

Easy to install. Holds my mountain bike in place well, no issues.