# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 2
Curt Double Lock Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Fits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 4
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 6
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 8
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Fits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 9
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Fits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 10
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 12
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 15
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 16
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 17
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Fits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 18
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 19
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 20
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."