Summer Starts Here - Save up to 70%
# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 2
Curt Double Lock Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
2007 Toyota TundraFits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 4
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 6
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 7
Curt Underbed Gooseneck Trailer Hitch for Ram 2500 - 30,000 lbs
Loved how eazy product installed instructions on hitch was great. Found on etrailer.com a video of how to install hitch. U will have to remove heat shild and exuast pipe to make much easier to in stall. The trailer ball is sweet u just flip up latch and turn then it's free to remove. Ordered hitch on Saturday free shipping and they called me to make sure it was shipping to right location. Then they emailed me when it shiped. It arrived on Tuesday on the same week. The price was great to. Will use hitch to pull 25 ft hay trailer and 24 foot stock trailer.
Very nice hitch, took me about 3 hrs to install on a 2014 RAM 2500 6.5 bed with help from the wife. The hitch is very thick steel, probably close to 1/2". The ball works great, very easy to secure and remove. Very happy with the hitch and glad I chose it over the turnover ball which seems to be slightly harder to install. Some tips... remove spare tire, remove heat shield, drill the 3 1/4" hole, make sure to use a good hole saw made for metal, positition the nuts using the brackets, have someone get the bolts started while you hold the hitch. Tighten the bolts, you will probably have to remove the exhaust hangers to move the exhaust enough to tighten the passenger side bolts, torque to spec, drill the safety hook holes, install safety hooks and put everything back together...thats pretty much it. I took my truck and had the bed Linex'd after I installed the hitch. They touched up around the holes. Looks awesome!
# 8
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 9
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
2007 Toyota TundraFits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 10
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
2007 Toyota TundraFits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 12
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 15
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 16
Reese Under-Bed Gooseneck Trailer Hitch w/ Custom Installation Kit
For the price of the product, packaging was terrible, product arrived with paint missing from several large areas due to shipping damage. Box was barely intact when it arrived. Also was missing one of the large grade 8 4.25” long bolts. So after a trip to the hardware store to replace the missing bolt and buy some paint to fix the damaged finish, got it installed pretty easy.
This package was received with 2 passenger side brackets and Missing hardware. Called etrailer and The reshipped the hardware and another passenger side bracket. Now 5 days after the truck was taken apart we still can't get it back together to go pick up the camper tomorrow. I did call etrailer again and said we need the drive side bracket it will have a D on it. Maybe I will update this review once we have the right stuff and can get the truck back together.
# 17
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 18
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 19
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 20
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
2007 Toyota TundraFits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.
What our customers are saying:
"Heard about you from a friend. I'm very impressed as to how fast my parts shipped. I was worried I wouldn't get them in time. I'm impressed. Thanks. Steven"