Best 2005 Polaris Ranger Trailer Lights

My two year old yacht club trailer side marker lights had a mind of their own and would inadvertently decide to energize or not. The bulbs could not be replaced as these were a one piece unit.I ordered two LED marker lights from etrailer and after replacing the incandescent fixtures I haven't had an issue. I predict my rear lights being next.

This is a nice quality light and the LED aspect of it is sweet. I am holding back a star because the black wire that powers the light is ridiculously short. If you are running the light out on a fender, you have to split your wire harness and send the brown wire to it. If the manufacturer had spent another one tenth of a cent and made the black wire longer, it would have been better. Also, the back of the light, the grooves for the wire are a bit shallow. Difficult to get the light to sit properly. Once it's up and running it's quite sharp.

Very good company. I have bought several items from retailer, I haven't been disappointed. Good quality, good service.

Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.

I purchased $XX worth of led lights 6 marker lights and 2 ovals. The marker light had a protective wrapper and showed up pristine condition, however both ovals were thrown in the box with no protective wrapper the clear oval has a scratch but is still in good condition the red oval has scratches all over it to the point it looks used. Pretty Sad. Wish I could off included photos but it was hard to see the scratches In the picture my camera isn't the greatest.

I had to replace one burned tail light on my 2005 cargo trailer. I bought two and replace the other one as well. They work perfectly. The size and the 3 pins connction are the same as the original. A little downside is regarding the packaging. I would expect each light wrapped individualy to avoid the rattling in the box. See pics.

They look great installed. Only recommendation I can make is to include crimp connectors at least for the side marker lights and perhaps a small length of protective wire wrap. All in all I’m very pleased.

Excellent product. My old trailer lights were corroded and only worked intermittently. I began trying to clean & repair them, but it was a major PIA. I realized I could buy a brand new set for a reasonable price. They arrived today. This afternoon I installed them with no difficulty. They work great! On-line ordering was clear and easy. Shipping was fast, etrailer kept me informed of my order status.

Before installing these marker lights on my boat trailer, I touched the power wire and ground wire to the terminals on my truck battery. This light is at least 2X brighter and more vivid than the older LED lights that I am replacing. The older lights had a very suspect push on connector that would rattle off from road vibration. These Optronics have a sealed, through the back, power and ground wire. Far better!

To bad they don’t come with a gasket to make them more waterproof and fit better on rough surfaces. Service and communication were great and recommend Etrailer to anyone.

I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services! My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.

Great addition to the basic, rear brake lights of a camp trailer. I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning. These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!

This light was exactly like described. I purchase a lot on line and use amazon prime for free shipping. I could not find this light on amazon and was very impressed that etrailer.com had very reasonable shipping prices. Instead of gouging the cost was in line what normal shipping cost would be. The shipping and tracking were spot on and the lights were delivered as promised. A VERY good company to work with.

I bought these lights for a boat trailer. They are very bright and we're easy to install. I would recommend to anyone looking for replacement lights

Seems to stick great and great reflectivity. I didn't realize it was cut in 12" sections. I had planned to used long pieces for the side of the trailer, but the 12" sections ended up working well, and may have been easier to apply.

I haven't put any on yet, but everything I get from E-trailer has been A-1 and the shipping is always great.

The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn

Much brighter than my previous tail lights. Easy to install. Would definitely buy again!

Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.

Very clean installation on my home-built e-tricycle carrier. Works perfectly. Nice and bright!

Knowing that a Black trailer would be hard to see at night the following lights were added to my custom built trailer for night time safety. 1- Side mount red and yellow fender light which only works when either the brakes or turn signal are in use. 2- Front Clearance lights, which give additional lighting at night when approaching on coming vehicles.

Excellent service, speedy delivery and perfect look and fit as original. Advised of order placement and shipping status. This is the third order I have placed and each has been clean and easy. I will continue to do business with etrailer in the future. Roger D.

They look very nice and durable, just what I wanted. They are a replacement to the very same ones I had originally on my old Chevy C30 dually. I don't know that they work properly as of yet, I did not try them out yet. The only thing I saw that could have helped some, was a necessity for wrapping them in some type of bubble plastic balloon to keep them from being thrown around Inside the Box. Otherwise, thank you.

Replaced the truck box lights on my 1948 Ford . Great quality .

After one year of having the Thinline LED Trailer Tail Light I have not had any issues. This is attached to my jetski trailer and is used consistently, trailered throughout the summer loading and unloading into the water.

Great light clear so you don’t notice them till the brakes are Applied during the day. Mounted under the tailgate on both sides. Very bright at night. Extra warning For vehicles to the rear.

These lights never disappoint. They are the perfect side marker/clearance light. These let everyone know you’re hauling something behind you. Especially at night. Also at night, I can see the lights on my trailer fenders through my door mounted mirrors perfectly. Thank you etrailer!!!

I purchased these for the side rail marker lights on our 20’ boat trailer. I liked the protection on the top and bottom of the lens. There are two lights in the picture. One on the fender and one on the side rail. I used the light that came in the kit to mark the fender and this to mark the side rail.

Nicely done !

No problems looks like new after 1 year

Works great as a reflector on my motorhome mud flaps.

I have installed these Red Conspicuity Reflectors on the blacked-out bumper portion of my 2014 Toyota Corolla. The upper portion of the blacked-out bumper was too curved and the surface too rough to mount these reflectors. The reflectors adhesive sticks fairly well to this surface, but because the surface is slightly curved, it will be necessary to mount the reflectors with small black screws. I have not yet found the appropriate screws for this application. Otherwise I find these reflectors an attractive and functional addition to the automobile.

Perfect, light matches exactly. Very satisfied with all my purchases: Hitch, aluminum truck rack, boat trailer lights, wiring harnesses…

I have been more than pleased with the quality and performance of the Optronics brand lights! These are no exception! This tail light assembly is a direct replacement on my ShoreLander trailer. The running lights, including four on the side, are a nice feature. The brake/signal light are more intense as expected. Lastly, the dimensions and mounting holes allowed me to bolt them into place without issue! I, like others, am amazed at the brightness of the lights. They are a huge upgrade over my existing incandescent lamps! I am looking forward to no more burnt/broken bulbs! I have purchased Optronics tailslights in the past, and am purchasing again as I like the quality/performance of the taillight assemblies. I would buy again and I would recommend to others as well!

Just rewired a cargo trailer I bought that the lights were always going out. Found 20 butt connectors the guy used no wonder they worked off & on. Now with two new tail lights & new wiring with a straight connection everything works like it should. Everything I have bought from etrailer has been good quality & fast shipping. Thanks

I received the light right on time.I was using my dump trailer on a Monday project. The light came right on time saturday.Matched perfectly. I installed it in about ten minutes. Thank you.Your site is really easy to use.Great project, great service

This is a nice frame that is well built and holds your place very securely. It is a SURFACE mounted frame to replace the INSET mounted frame I had mistakenly ordered (from the trailer manufacturer!). Etrailer is the best source because of all the views of the product they provide so that you can know what you are actually getting.

This license plate holder installed easily and works great.

Chose Optronics because of warranty and help from customer service at etrailer. Staff is awesome, very knowledgeable. Light is very bright, installation very easy, all holes lined up with factory holes on a 2001 Shoreland'r boat trailer

No more bulbs to worry with. It fit perfectly on my trailer. It lights up very clearly. The cost is competitive but the quality surpasses....