# 1
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
Good quality, combining these with the bronze bushings made for a smooth, quiet, and durable ride on my early 80's equipment trailer.
Nice fit, Looks well built.
# 2
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
I chose this particular kit mainly for the 9/16" u-bolts. I could have easily used the 1/2" kit but it was a nice upgrade and not much difference in cost. These u-bolts and plates fit my car trailer perfectly without any modifications. Everything in product description was just what it said when I received them. Shipping was faster than I expected!
Looks like good quality. The U-bolts are bigger than what is on the trailer and that is good!
# 3
Dexter Trailer Springs Over-Under Conversion Kit
I have a 99 cummins with 35s and a 5 inch lift. My 5th wheel now sits level and I even raised the king pin up another hole. I'd definitely buy this again
Kit arrived missing all but 2 of the ubolt nuts. No biggie, had some on hand. Went to install ubolts and they were too short. Bought new ones. Went to use top plate and it was too narrow. Had to make new ones. Only thing I used was the axle perches... Which you can buy anywhere. Total waste of money. Make your own kit like I ended up doing.
# 4
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Your shipping time went wrong, but Kelsey’s way of handling My order with problems, made my respect level go up. Also, on your website, you have a picture of equalizers that look American made, with your name on it. What I received was stamped China and looks cheap…..
I needed it quickly because on stripped on my trailer and we were getting ready to leave the state in our Wold Pup. I paid for the extra shipping and they got out and to me in 2 days. Thank you.
# 5
Dexter Trailer Springs Over-Under Conversion Kit
I ordered this kit to keep my 19' Coleman tent trailer from dragging the rear bumper on direveway approaches. Install was super simple, finished everything in about 40 minutes. I gained about 5 inches of added height. I chose to not tack weld the perches in case the next owner doesn't like the height. No problems with a few thousand miles of rough roads. Highly recommended.
It's not rocket science.... Very easy to install. I out these on a 20' big Tex trailer and did very small welds incase I decided to sell I can put it back to the original height. It raised the dovetail in the back 5 inches and couldn't be happier as we take a couple of rzrs in the mountains and it was tough getting this trailer in places without dragging it. I would recommend this kit
# 6
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Perfect replacement. Definitely worth money.
# 7
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Parts arrived in a timely manner and were as advertised...Great service from this company.
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
# 8
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
I am very happy with the service and knowledge of the customer service. Everything has been shipped out promptly and arrived in great condition. I would recommend them to anyone looking for trailer parts. Thanks for the help.
# 9
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Well hello, I dont do many reviews but I will have to say that the people at etrailer are very nice and very easy to deal with and they know there business for sure , I havent installed my parts yet and they arrived dead on time and I knew every step the parts made along the way to me . So far I am very pleased and that is hard to do with me as 99 percent of the time nothing is ever the way suppliers say it going to be until now with etrailer , very nice job guys and thank you and I will be installing everything this weekend and will do another review and will have some pics along the way, And by the way thank ou for keeping the prices affordable for us out here in the field trying to keep our equipment rolling and safe , with your prices no reason to be able to do just that , again great job guys .
Suspension parts worked just as expected and shipping was prompt. Good experience.
# 10
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
Installed these along with new springs on my 20ft car trailer and so far they've held up great to hauling 8000lb+ trucks and anything else I decide to throw on there.
Fit well with no adjustments
# 11
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
After a year and 20,000 miles, this was one of the best upgrades in towing and ride on my 42' fifth wheel. It took out a lot of the small bumps that would open cabinet's and knock things over in the shelves. Another great advantage is the bronze bushings are greasable and do not squeak like the OEM plastic, the OEM bushings had around 3000 miles and we're already worn through, the bronze if kept greased will probably last the life of the trailer.
You can tell a company that you want to do business with when something goes wrong. They did the right thing and upgraded the shipping so we can make our vacation spot on time when these slipped through shipping some how. Anyways they have me as a customer for life now! THANK YOU Jennifer and George. You are the reason I am now a happy camper!!!
# 12
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 13
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
Perfect replacement. Easy installation took about hr to install each side.
# 14
Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
Perfect placement. Grease fitting great. Definitely worth the money
# 15
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
Worked great for my camper axle
# 16
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Rec'd item quickly along with new wheels I purchased. Items were packed very well. I installed my new wheels, tires, and equalizer kit the following weekend and my trailer was ready to go.
# 17
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.
After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.
# 18
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Gracias
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
# 19
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
Axles flipped, and going down the road.
No issues with the bearings
# 20
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
Worked great, paint is holding up, hardware was good quality, bolted right in…no issues, hold load at least as good as factory springs. Would recommend and buy again!!
Not only were the parts the right parts the kit had all I needed to do it right the videos made it as easy as it could be. The right parts that work and good videos on how to do it. I did call to be sure I was ordering everything I was going to need and was given great advise and was not encouraged to get things that I did not need. They are my go to team to get anything trailer done.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."