Most Popular Trailer Connectors for 1968 Chevrolet Malibu

Just got it and haven't had time to install. Everything seems great.

Excellent. The only down side for my Lexus RX300 was not having an “easy” way to mount male 4-way next to hitch rather than stowing it beside tire bay. No big deal just a plus.

Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.

Harness is well made and shipped quickly and packaged perfectly

Took about 15 to 20 mins total to remove all the covers,Matt’s etc Wiring it in is so easy, only 4 wires, Use blue butt splice connectors instead of the ones it comes with. You can buy a small pack of ten for about 3 bucks, by doing this you will never have to worry about a loose connection. The video tells you what color goes where. I like to put a small price of electrical tape over every connector I do. Looks more professional and the wires can never come apart.

The trailer harness came as described and in quick time. I was unable to find this item anywhere but etrailer. I already installed it and it worked great! Thank you for providing quality and unique items for trailers.

Replaced the wiring and lights on my 1992 boat trailer. I was able to get everything needed from etrailer. I think Optronics is of the highest quality and recommend both etrailer and Optronics product.

All these products were great.

Sooo, bought another one to match my truck side connection as GM uses Pollak, which are known to not play well with other brands. The design is just a wire clamp to wire it, which I did with the first one, but trying to get it secured I stripped out the screw. There are no torque specs provided. I’ll move to crimped ring terminals on this one and dial back the torque a bit.

Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.

Click to Enlarge

The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!

Great product no issues at all. Product as described & fit properly.

Pretty straight forward. I used it to switch my European trailer's connection to be able to connect to my Wrangler's 4-pin trailer hookup. No issues. works great.

Quick shipping, will order from them again!

Exactly what I needed and It's a great fit

Worked excellently. No problems on the install.

I am enclosing 2 photos of trailer connector I purchased from etrailer. I have a 1995 Dutchman popup trailer. It had a 6 way round connector which would not fit my 2010 F150. By using your trailer connector diagrams, I was able to determine Dutchman was using white for the ground, blue for brakes, black for battery, brown for right turn/brake, red for left turn/brake, and green for tail lights. I replaced the 6 way with your 7 way connector.

Click to Enlarge

Click to Enlarge

Quality built product. This connector seems to take less effort to plug in to the 7-flat socket than others that I have installed. Metal housing provides great rigidity. I appreciate that they include the clip to stow the connector when not in use. If I could improve on it, I would prefer the manufacturer find a way to design the inside to be less obstructive to the 7 wires that have to pass through the middle. I use heavily insulated 7-wire harness, and had a difficult time squeezing everything in to the provided space. All said and done, very happy with the product and I do play on purchasing again next time I need another. I would recommend this to any professional installer. My application is 5 different trailers that include surge and electric brake assemblies in a fresh water marine environment on multiple types of vehicles. This produced is plugged and unplugged almost every day.

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

GREAT ACCURATE REPLACEMENT WIRING.

Timely shipment. I’ve bought from your company before and haven’t been disappointed. Nice job.

Finding the metal female connection can sometimes be difficult, but it is well worth it . No breaking, cracking from stress and heat expansion. I recommend these .

Great Product! Hasn't let us down yet.

I used this harness to rewire a 10ft vintage RV. There was plenty of length to reach the rear lights. I used Scotch Locks to tap into the wiring for the side running lights. Very good product.

Click to Enlarge

Very happy with every aspect of my order. Received product and quality appears to be outstanding. I’m especially impressed at the instructions made available to install the wiring harness, written with the product and link for video. All bases covered and follow up to make sure all goes well. Am confident of their assistance should I need it.

All these products were great.

Product is high quality & works great! Can't beat etrailer

I fitted the Hopkins 5-way flat connector harness with a 5-way round plug which couples to my Goldwing trike (tow vehicle). The popup trailer lights operate as designed.

Connector and wire harness well made - connector designed such that it can be mounted and harness has added protection for wires. Would like to have marine grade wire since I do mostly saltwater fishing. I mounted the connector on a piece of 1.5" square galvanized tubing painted black.

Click to Enlarge

Click to Enlarge

The pins were too big by a little bit. Had to force the female plug into the socket

I purchased both pieces and got the fifth that I was looking for for my motorcycle. I would recommend this for anyone wanting to wire the motorcycle to pull a trailer.

Click to Enlarge

Great place for any trailer needs. They alway gave what I want at a good price and fast shipping.

Just what we needed to make a custom harness for our boat trailers that we often tow with light and medium-duty wreckers. No more zip-typing our wireless drag lights to the trailers! Thanks, guys!

Used on a pull behind motorcycle trailer so could go from receiving a 6 pin to a 5 pin. Wired it into loom so can use on more than one motorcycle. Works great. Glad to have found a place that even sold this product.

A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.

Click to Enlarge