Video Transcript for Review of Pacbrake Air Bag Compressor Kit - In-Cab Gauge - PB98ZV

Hi, everyone, Steven here with etrailer.com. Today we're taking a look together at our Pacbreak basic paddle valve in-cab control kit with digital gauge. Folks, this is an independent fill, meaning you have a dual paddle valve, but it's gonna provide separate inflation and deflation for each spring. Meaning if I want to inflate one side to kind level out my load, maybe, I have a cabin or a camper in the bed of my truck, and it's heavier on one side, I can then level that out with that independent fill option. Now you're gonna have a nice clear, it's not gonna be lit up right now, obviously, but you're gonna have a nice clear digital pressure gauge display. It'll give you precise readings in one PSI increments for both airbags in one clean view, and it integrates with your existing air system.

So again, this is not the compressor or anything like that. This is just the kit to be able to connect directly to your current compressor and air springs, and you don't have to use a air tank for extra air or anything with this. So this would be a cost effective option, and it's an affordable alternative to the premium onboard air kits that have that full control functionality. So maybe your budget's not ready for something that big, but you can do this where you can independently do it and you can mainly do it or whatnot from inside the cab, rather, this could be a great option for you. You obviously have the bracket for both switches here, so you can go up and down independently.

Again, whatever airbag you want to inflate or deflate. Now, this would be great for a modular onboard air system. Again, you can pair it technically with another brand's air tanks and compressor if you so choose. But obviously it's been built for the Pacbrake brand and it works great with that. But it also works on other air tools and accessories and those kind of things as well.

So lots of stuff here. You got a manifold block here, you got the pressure switches and everything, all your fittings, cable ties. You have a nice fancy little airline cutter tool. So you got one, two, three different airline colors here and different lengths obviously. So all the instructions that come with it as far as setting everything up.

And then of course you have your wiring connectors for each of these pressure switches and everything. So everything's here ready to go. It will take some time to install it. I'm not gonna lie to you, there's a lot of stuff here. Just take your time. Or if you don't wanna tackle it yourself, you can use our website, etrailer.com, and our dealer locator tool, and we can help you find someone in your area as well for the install. I'm Steven, thanks for watching.