Life is complicated enough. Make locking up your gear simple with a set of SKS Lock Cores. Sold in pairs, these locks are keyed alike, so only a single key is needed to open everything. Now isn't that easy?
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jake: Hey guys, it's Jake here with etrailer. Today, we're going to be taking a look at the Yakima Lock Cores. These are going to be made for your roof rack to be able to lock into your roof. When you buy them from the factory, they're just going to come with plastic lock cores, and it's not going to secure it to your roof while you're not with it. For the example, with our SkyLine Towers, they're very, very easily removable. Just pull back and lift up and your bars are going to be gone.
So by replacing these plastic lock cores with the locking cores, you're not going to have to worry about anyone stealing or tampering with your roof rack. In your kit, you're going to get two keys that are keyed to unlock and lock all of your lock cores, and you're going to get one installation key. This is the key dish we're going to use to push the lock cores into place.To start with, we need to take our flat key and pop our plastic lock cores out. And to get our lock cores into place, we just need to take it, you're going to line it up with this hole. So right here is where you're going to see that little indentation that you're going to stick your lock core into place, where that little knob is going to stick down inside there.
Just push it into place.Now we can take the tip of our finger and hold our lock core and pull our control key out. And we can take one of our two keys that has our notches in it and lock up our bars. And you'll repeat this process for all four of your foot packs. Now, as I said, your kit is going to come with two keys. If you we're to lose them, there are replacement keys available.
On the back there's going to be a letter followed by three numbers. It's a good idea when you first get your kit to write that series of numbers down, so that you know which key is yours, and you can order them here at etrailer.Now, one little helpful piece of advice I'd like to provide you all with is, if you plan on leaving your rack on your vehicle during the winter time or whatever you might be putting your lock cores in, it's a good idea that when winter time is approaching, you spray a little bit of lubricant on the inside of your lock, not only to help your lock work properly, but it's going to prevent any water from building up inside, potentially turning into ice. I had a situation one time where I needed to get into my toolbox for a side job and I couldn't get in because water had gotten into my lock and froze solid, and I couldn't get my key in. But with all that being said, that's going to do it for our look and installation of the Yakima Lock Cores..
Easy to install, works great!!!
Do you have a question about this Accessories and Part?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.