Parts Needed to Key The Yakima EXO and Accessories With The Same Keys

Updated 03/12/2024 | Published 03/11/2024

Products Featured in This Question

Yakima EXO Swing Away Ski and Snowboard Carrier w/ Enclosed Cargo Carrier - 2" Hitches

(12)

$2205.80

Yakima Same Key System (SKS) Lock Cores (QTY 8)

(502)

$109.95

Replacement Control Key for Yakima Same Key System

(232)

$10.85

Question:

Hello, I recently bought the Yakima EXO system. Unfortunately, nearly every lock core on it is different from the other. I am trying to replace eight of the lock cores. I’ve searched the Internet and tried using the control key to remove the cores on the end of the knobs that hold the racks. It doesn’t want to seem to release the core. Thank you.

asked by: Jordan S

Expert Reply:

I completely understand your frustration Jordan. We do have our Yakima Same Key System # Y07208 which includes 8 cores all keyed alike so you would only need to have the one key to open all the components on your Yakima EXO # Y94ZR. Otherwise if you can tell me what lock key codes you do have I can check to see if we have any of those cores already so you are not having all the additional cores.

As far as having trouble removing the lock cores you will want to ensure the locks are unlocked as the Control Key # Y8007835 will only work when the lock core is unlocked. This prevents theft if someone just has the control key. Also as the parts are new you will likely need to jiggle it slightly as they could be some of the grease from the lock cores helping it to stick inside the opening.

expert reply by: Bud M

Jordan S.

3/12/2024

Yes, I already have replacement lock cores and a control key and I’m doing it the way it is shown on the video for other applications. The knobs at the end of the EXO interchangeable racks don’t seem to want to let go of the lock core. Is there a different technique for the knobs?

Bud M.

3/12/2024

@JordanS I reached out to Yakima for verification and to see if they have heard of this being a problem and they stated they have not had this issue. Their only recommendation was to spray some silicone lube inside the lock core but this is typically only needed on older locks that have begun to dry out and stick.

Jordan

3/12/2024

Thanks for looking into it. It looks like on the rack arm knob I was working on the plastic housing was a little deformed. I was able to change the rest of them and then shaved down the overhanging plastic and the core came out.

Bud M.

3/12/2024

@Jordan Glad to hear you got it resolved. I'll let Yakima know about this for anyone else who may have the issue in the future.