To use Black Boar implements behind your ATV or UTV, you need a lift. This manual lift mounts to a 2" receiver and lets you swap attachments, raise them for travel, and lower them for work without electrical wiring.
A garden, food plot, and gravel driveway require different tools. This lift holds the compatible Black Boar implement for the job, letting you switch attachments without buying another lift. Use the chisel plow (CAM75PC - sold separately) to loosen hard ground or the disc harrow (CAM45PC - sold separately) to work soil for planting. The landscape rake (CAM65PC - sold separately) clears loose debris, and the scrape blade (CAM25PC - sold separately) smooths dirt or gravel. Switch to the plugger/aerator (CAM92PC - sold separately) to aerate the soil or the cultipacker (CAM42PC - sold separately) to firm a prepared seedbed.
For soil that resists the discs, chisels, or plug tines, add the Black Boar weight basket (CAM52PC - sold separately) to the lift's rear shank channel. It holds two concrete blocks (not included) for more downward force when the implement isn't penetrating deeply enough.
When you need to move to another part of your property, turn the handle to lift your attachment off the ground. Lower it again when you're ready to work. The parallel linkage keeps the implement at its working angle. You can also remove the handle and retaining pin, then use a cordless drill with the included 3/4" socket to raise or lower the lift. There's no electrical hookup to your ATV or UTV.
This lift slides into a compatible 2" x 2" receiver on the back of your ATV or UTV. Secure it with the included hitch pin and clip. Some assembly is required before installation, and you'll need to check your vehicle's hitch rating and clearance before using an implement. You'll need a 3/4" wrench and socket, plus a torque wrench (PT87ZR - sold separately) for tightening the four pivot joints to 70 ft-lbs. Grease the fittings before first use with a grease gun (L30-310 - sold separately) and moly lithium grease (LM54FR - sold separately). Lubricate the grease fittings every 25 hours of operation, or more often in dusty or dirty conditions.
The weight of the lift and implement puts extra load on the rear suspension of your ATV. The Black Boar suspension lock (CAM85PC - sold separately) supports the rear suspension to limit sag. Remove its center bar when you're done using the lift and implements to return your suspension to normal.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.