Raising a Black Boar implement by hand interrupts your work. This electric lift mounts to your ATV or UTV's 2" receiver and raises or lowers compatible implements with a switch from your seat, so you can keep working without cranking.
A garden, food plot, and gravel driveway require different tools. This electric lift holds the compatible Black Boar implement for the job, letting you switch attachments without buying another lift. Use the chisel plow (CAM75PC - sold separately) to loosen hard ground or the disc harrow (CAM45PC - sold separately) to work soil for planting. The landscape rake (CAM65PC - sold separately) clears loose debris, and the scrape blade (CAM25PC - sold separately) smooths dirt or gravel. Switch to the plugger/aerator (CAM92PC - sold separately) to aerate the soil or the cultipacker (CAM42PC - sold separately) to firm a prepared seedbed.
For soil that resists the discs, chisels, or plug tines, add the Black Boar weight basket (CAM52PC - sold separately) to the lift's rear shank channel. It holds two concrete blocks (not included) for more downward force when the implement isn't penetrating deeply enough.
When you need to move to another part of your property, press the switch on the control grip to lift your attachment off the ground. Lower it again when you're ready to work. The electric actuator does the lifting instead of a hand crank, and the parallel linkage keeps your implement at its working angle. Strap the control grip to your ATV's handlebar to operate it from your seat, or remove it for handheld operation when you're standing nearby. If you hear clicking from the actuator clutch, release the switch. Don't use clutch engagement to set the implement's working depth. Keep clear of the lift and implement during operation.
This lift slides into a compatible 2" x 2" receiver on the back of your ATV or UTV. Secure it with the included hitch pin and clip. Some assembly is required before installation, and you'll need to check your vehicle's hitch rating and clearance before using an implement. You'll need a 3/4" wrench and socket, plus a torque wrench (PT87ZR - sold separately) for tightening the four pivot joints to 70 ft-lbs. Attach the electric actuator to the linkage, then connect the included wiring harness to your ATV or UTV's 12V battery or an auxiliary battery. Route the wiring away from moving parts and areas where it could snag during use.
The weight of the lift and implement puts extra load on the rear suspension of your ATV. The Black Boar suspension lock (CAM85PC - sold separately) supports the rear suspension to limit sag. Remove its center bar when you're done using the lift and implements to return your suspension to normal.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.