Expert Review Video:
Vehicle Style: 1500 - 6-1/2 Foot Bed Change
5th Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Above Bed Rails
6 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >5th Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Above Bed Rails
6 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >5th Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Above Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >5th Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Above Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >Videos
for 5th Wheel Hitch
Help Articles
for 5th Wheel Hitch
Expert Answers
for 5th Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The OEM prep package consists of 4…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the…
view full answer...As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
view full answer...Hello Gary. For your 2024 Chevy Silverado 2500 HD with short bed it is recommended to have a sliding hitch to ensure that you can get around those really tight turns without damaging the cab of your truck. For a Curt sliding hitch I would recommend…
view full answer...Hey Heath, thanks for reaching out! The Curt A20 #C55DR and the B&W Companion #BWRVK3670…
view full answer...Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…
view full answer...The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130…
view full answer...Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that…
view full answer...Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing…
view full answer...