Vehicle Style: 6-3/4 Foot Bed Change
Fifth Wheel Hitch: BWRVK3270
Price: $899.00
Installation Rails: BWRVR3200
Price: $188.08
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Universal Install Kit BWRVR3200
Above Bed Rails
6 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Hitch does not fit Cab and Chassis or vehicles with 34 inch frame
More Information >Fifth Wheel Hitch: DM8550034
Price: $1,725.00
Installation Rails: DM8552006-71
Price: $289.19
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit DM8552006-71
Above Bed Rails
4 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
More Information >Fifth Wheel Hitch: DM8550022
Price: $1,910.00
Installation Rails: DM8551000
Price: $587.74
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit DM8551000
Below Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The OEM prep package consists of 4…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…
view full answer...Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR…
view full answer...The head alone for the…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...As long as the RBW…
view full answer...The B&W…
view full answer...There are a couple of options…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
I highly recommend, very fast service , Good product. A very good company to deal with !!
John
East Strousburg, PA