Swapping 5 Lug Hub Drum for EZ Lube Spindle with 6 Lug Hub Drum for Standard Spindle
Updated 06/26/2014 | Published 06/24/2014
Products Featured in This Question
Question:
I have two trailers, one with EZ Lube hubs and 5 bolts, another without EZ Lube and 6 bolts both systems were purchased from you. Id like to swap the drum/hubs so that I can use 6 bolt wheels on the trailer that now has 5 bolt hubs. Is there any issue with swapping EZ Lube hubs and non EZ lube hubs? Other than of course losing the EZ Lube capability. Thank you
asked by: Bob T
Expert Reply:
If both hubs are compatible with the same bearings and you can find a seal compatible with the diameter of the hub bore and the journal surface of the spindle, you can swap the hubs from the EZ lube to the regular spindle. Since the EZ lube system is contained in the spindle, it doesn't matter to the hub.
I looked at your order history, and saw that the 5 lug hub/drum you previously purchased was part # AKHD-545-35-EZ-K. This hub uses a # L68149 inner and a # L44649 outer bearing and a 10-9 seal. For a 6 lug on a 5-1/2 inch bolt circle wheel, you can swap it with a # 84656UC3, which is designed for a standard spindle.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Video: Trailer Axle Beam with Easy Grease Spindles Review
- Video: Trailer Axle with Idler Hubs Spec Review
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs
- Shop: Timken Replacement Trailer Wheel Bearing - 25580
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Q&A: Does Trailer Wheel Bore Need to Match Exactly When Picking Out Replacement
- Q&A: Converting A 6 Lug Hub To A 5 Lug Hub
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Search Results: 16x6
- Search Results: shock kit
- Search Results: shackles
- Search Results: trailer bump stop
- Search Results: brkh12
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Search Results: 6 on 55
- Search Results: rv wheels
- Q&A: Converting from 5 on 4-1/2 Inch Trailer Hubs to 6 on 5-1/2 Inch Hubs
- Q&A: Can 5-Lug Hub Be Upgraded to 6-Lug Hub
- Article: Trailer Lighting Requirements
- Video: Ultimate Overview of the Lippert AP Kit
- Q&A: What Would Cause Wheel Studs to Break on a Trailer Hub
- Video: An In-Depth Look at the ThermaHeat RV Holding Tank or Step Heater Pad w/ Thermostat
- Q&A: Does Westlake ST235/75R15 Radial Tire & Wheel Come Balanced