What Hanger Kit To Use For Tandem Axle Trailer With 2,000 lb Axles

Updated 10/27/2025 | Published 03/05/2025

Products Featured in This Question

4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long

(2173)

$50.56

Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear

(696)

$92.92

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center

(696)

$60.49

Question:

Im building a 20ft tounge to back tandem axle trailer with 2000 pound axles and am going to use these 26” springs. My question is which hanger kit do I need? They all have different length brackets and I’m not sure what my best option is.

asked by: Torrey

Expert Reply:

Hello Torrey, thanks for reaching out. Generally with a 2,000 lb axle setup you would want each hanger to be the same height. Using a taller hanger will increase the deck height, and shorter hangers will bring it lower. So if you want a lower ride, you could use a kit like the # APT9 kit which comes with 2-1/2" tall hangers. Or to bring it higher use # APT5 which is 3-1/4" tall hangers. This could also help get you more clearance between the tires and fenders if needed.

I have linked a few articles for you below. One goes over the basics of double-eye leaf spring suspension, and the other will show you how to determine your axle placement.

Leave a reply below with any other questions or comments and I will get back to you.

expert reply by: Jesse M

How To Determine Correct Axle Position
(click to enlarge)

Jesse M.

10/27/2025

Hey Torrey, how did the hanger kit work out with your 26-inch springs on the tandem axle trailer? Did the 2-1/2 inch hangers give you the deck height you wanted? Your update could make it easier for others building a similar setup.