Replacement Trailer Taillight Lens for Grote 9015

Question

Question:

Need replacement amber cover for clearance lite Freightliner part Grote 9015

asked by: Faye S

0

Expert Reply:

Hey Faye, after I did some research, it looks like Grote 9015 corresponds to # MC68AB and the replacement lens for it is # A68AB.

expert reply by: Jameson C

0

Answer 1

We do have the white Replacement Exterior Half-Moon Trailer Vent for 3" Diameter Hole #WHMAV2 which is the white version of the #HMAV2 that you referenced and also is what you sent in a picture of so it would work well for you.

view full answer...

Answer 2

After I did some research, it looks like Grote 9015 corresponds to #MC68AB and the replacement lens for it is #A68AB. The light itself including the housing measures 3-1/2 inches side to side, 1-1/8 inches top to bottom and sticks out 1 inch. Compare…

view full answer...

Answer 3

The Optronics Clearance or Side Marker Trailer Light #MC68AB and #MC68AB are the same size as the Grote 9015 lights. Unfortunately they are not available from the manufacturer with a LED light. You can change the incandescent bulb to an LED Bulb…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 10

Hey Jeff, yes the Curt hitch part #C15323 does fit your 2013 Chevy Silverado 2500 6-1/2 foot bed. What are you planning on towing?

view full answer...

Answer 11

Hey Caleb, Both the Rhino-Rack Vortex Roof Rack for Naked Roofs #RR23VE and the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount #Y02-490B are approximately 5" in total height so with the camper shell matching in height these should…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Replacement Trailer Taillight Lens for Grote 9015

Product Page this Question was Asked From

Continue Researching