Solution for Front Hitch on 2024 E-450 Class C Motorhome

Question

Question:

I just purchased a 2024 class C motorhome with a Ford E450 chassis. Is this the correct front hitch for it? Thanks for any help you can give.

asked by: Donald L

0

Expert Reply:

Hi Donald; the # EH54QR is designed for the F-450 not the E-450 so it will not fit. I'm sorry to say there are no custom hitches made for the front of your motorhome. What you can do is take the # E17 to a local fabricator and have them fashion a custom hitch for you.

expert reply by: Robin H

0

Answer 1

Hello Dave, thanks for reaching out. Both the Hellwig #HE26GR and the Roadmaster #RM-1139-176 are a fit for your 2018 Ford E450 Class C Motorhome. Both are a 1-3/8" diameter bar so you would see the same results as far as improved stability and…

view full answer...

Answer 2

What year is your E450 RV? If it is 2008-2021, you can use Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65053. That said, if you have a newer model, we do have a customer that verified fitment on a 2023 E450 as seen in the…

view full answer...

Answer 3

Yes, the front hitch part #65053 that you referenced does fit your 2022 Jayco E-450 chassis RV.

view full answer...

Answer 4

The SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-106-54-1 you referenced are for extra heavy duty and rated for 7,000-lb capacity and are designed for your rear axle while the SumoSprings Solo Custom Helper Springs - Front Axle…

view full answer...

Answer 5

We have the Front #RM-1139-176 and Rear #RM-1139-147 sway bars to fit the 2024 Ford E-450 chassis under your RV. These are much stronger than any that were installed from the factory and will greatly reduce body roll and sway. I do recommend…

view full answer...

Answer 6

Adjustable suspension enhancement would be your best option. This will give you the ability to add the exact amount of additional support you'd need to prevent bottoming out while also not making the suspension overly stiff. So for that you'd…

view full answer...

Answer 7

The first thing you need to do when installing the #RM33RR, which is the #RM36RR with the brackets, is to center the steering wheel and lock it into place. If your tires weren't straight ahead when you installed this it is going to pull. Assuming…

view full answer...

Answer 8

The quickest way to solve this issue would be to simply loosen the u-bolts that hole the Roadmaster Exact Center Steering Stabilizer #RM82RR to the tie-rod of your motorhome and let the bracket move to a natural position so that it's not pulling…

view full answer...

Answer 9

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 10

No, Erich I am really sorry but we do not. I checked with our vendors and Curt, Torklift, and Draw-Tite do not have anything available either. Additionally, I went back a few years and saw that we have never had a custom fit from mount hitch…

view full answer...

Answer 11

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

view full answer...

Answer 12

I can tell you definitively that the Draw-Tite Front Mount Trailer Hitch Receiver #65053 is a direct bolt-on installation for a 2018 Ford E-450. This hitch is not welded on, and no holes will need to be drilled in your frame; you will only need to…

view full answer...

Solution for Front Hitch on 2024 E-450 Class C Motorhome

Product Page this Question was Asked From

Continue Researching