Will Draw-Tite Hitch Block Spare Release on 2022 Ram ProMaster 1500

Question

Question:

I see in the reviews multiple.folks saying it doesnt align with the spare tire tool? Should I be legitimately concerned about this? Otherwise like the product but thats a bit of an issue

asked by: Hany

0

Expert Reply:

The spare tire release mechanism may be blocked following the installation of the # 75882 on your 2022 Ram ProMaster 1500. It is possible it won't but I wouldn't count on that. If you want to install this hitch I would expect to have to modify the mechanism so you can use the tool. We don't have specific instructions on modification so it would be up to you to figure out. If that is not something you're willing to do I would get the # e99AR instead.

expert reply by: Robin H

0

Answer 1

Hey Dwayne, we have the Draw Tite hitch part #75882 which is a confirmed fit for your 2024 Ram Promaster 159 and is a Class IV hitch like you are wanting that attaches to the vehicle frame for a much more secure fit than what you have now.

view full answer...

Answer 2

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 3

Hello James, I am at a loss why Draw-Tite #75882 classified theirs as a class 4, it can handle the same weight as the Curt #C13207. The most concealed hitch would be the Curt #C13295, but it has the lowest towing weight so I am crossing that one off…

view full answer...

Answer 4

The best hitch for your 2022 Ram Promaster 2500 is going to be the Curt Trailer Hitch item #C13207. This hitch is custom fit and bolts to your Ram with included hardware. It has a 2" receiver with a 6,000 lbs weight capacity that can be…

view full answer...

Answer 5

For a 3,000 watt inverter you'll need a 300 amp hour lithium battery like the Go Power Sun Cycle Advanced Lithium RV Battery item #GP26QR.

view full answer...

Answer 6

I have another option for you, but the grounding nut you show in your picture will interfere with the installation of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13207 you were looking at, and would need to be relocated.…

view full answer...

Answer 7

I would be happy to help you. Removing the factory hitch is not necessary and will be difficult to remove based on how it was attached to your Ram 2500's bumper. Ultimately, it'll be up to you but it being on there will have zero effect on…

view full answer...

Answer 8

Hey Mike, so a friction sway control unit like the part #83660 can help stop some of the sway that starts from wind or passing semis but if you are experiencing persistent sway once you hit a certain speed that will only be fixed by increasing the…

view full answer...

Will Draw-Tite Hitch Block Spare Release on 2022 Ram ProMaster 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching