Parallax 7100 Converter Upgrade for LiFePO4 Battery Bank

Question

Question:

Hello, I have an older Parallax 7100 series 55 amp converter and would like to upgrade to LiFePO4 batteries. Will your Item PD4655V work? Are there any other accessories required to make this upgrade? Thank you.

asked by: Gordon

0

Expert Reply:

Hey Gordon, thanks for reaching out!

Yes, the 55 Amp Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel # PD4655V will replace your Parallax 7100 just fine.

You won't need anything else to complete your upgrade!

expert reply by: Jon G

0

Answer 1

Hey Kenneth, thanks for reaching out! I think it comes set for Lithium, but you will need to check. If you look at the "H6" position on the circuit board (see attached photo), you'll want to make sure that jumper is in the…

view full answer...

Answer 2

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…

view full answer...

Answer 3

Thanks for the pictures! It looks like you have a 55 amp Paralax Converter. The replacement you are looking for is the Progressive Dynamic Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp item #PD4655V.

view full answer...

Answer 4

Hello Lou. On the wfco 8955pec it is a 55 amp unit, its why it has the 55 at the end of the part number. The Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 55 Amp #PD4655V, is also a 55 amp unit. Replacing the circuit…

view full answer...

Answer 5

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 6

Since the converter section of your 6300/6345 has a frozen fan motor you'll need to replace the whole thing with the Progressive Dynamics Replacement Section #PD4645V as we don't have individual parts available for them. When it comes to…

view full answer...

Answer 7

Since they didn't list the converter amperage rating on your panel you'll have to just choose the amperage your battery bank requires and then do a bit of investigative work to ensure that the wire gauge used for the converter is enough to…

view full answer...

Answer 8

Hey Mike, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and…

view full answer...

Answer 9

Hey Kyler, thanks for reaching out! **UPDATE IN COMMENT SECTION - JUMPER LOCATION IS DETERMINING FACTOR** The Progressive Dynamics Replacement Section #PD4655V is compatible with lithium batteries. There is a button on the board (see photo) that…

view full answer...

Answer 10

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp item #PD4655V is the correct replacement for the converter section of the Parallax model 7155. I have linked the installation instructions and a review video.

view full answer...

Answer 11

I took a look at the replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4655V that you mention, and unfortunately it will not work with lithium batteries, and should only be used on flooded lead acid, AGM, and gel batteries.

view full answer...

Answer 12

The Go Power RV Converter and Smart Battery Charger - 12V - 55 Amp #34266169 is a 55 amp converter/charger so you could definitely replace your current PD9155 with it. With it being rated for the same amperage this would be a very simple swap out for…

view full answer...

Parallax 7100 Converter Upgrade for LiFePO4 Battery Bank

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching