How To Wire License Plate Light/Bracket With 3 Wire Connection
Published 04/25/2024
Products Featured in This Question
Question:
Connecting bracket license plate light with yellow black and red wires. What do I connect to on a 4 pin connector. Also if I dont use all 4 wires on 4 pin do I just cut it off?
asked by: Frank
(click to enlarge)
Expert Reply:
Most Trailer License Plate Lights with a Bracket like the Optronics # LPL55CB you found are only going to have 2 wires a power and ground for the light. It looks like yours has either an additional light for either a reverse light or brake light. While I cannot tell who manufactured your light you are most likely going to have to test the light with a 12 volt battery to determine which wires are power and for which function and which is the ground. Typically white or black are the most common ground wires so that is going to be the best place for you to start your test. On a 4-Way # HM38138 the white will be for the ground and brown for the running light for the license plate. The yellow is for the left turn signal/brake light and the green is for the right turn signal/brake light.
Product Page this Question was Asked From
Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens
- Trailer Lights
- License Plate Lights
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 8-5/8L x 3-1/4W Inch
- White
- Optronics
more information >
Continue Researching
- Search Results: wheel lock
- Search Results: rhino rack
- Search Results: trailer license plate holder
- Search Results: 5th wheel lock
- Search Results: bottle jack
- Search Results: jack
- Search Results: sportrack
- Q&A: Will the Yakima SkyBox NX Fit My Rhino-Rack RECONN-DECK BAR Crossbars?
- Shop: Surco Safari Rack 5.0 Rooftop Cargo Basket - 50" Long x 50" Wide
- Shop: Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens
- Q&A: Comparing Yakima CBX and SkyBox NX Internal Box Dimensions
- Video: A Closer Look at the Quick Splices
- Video: Breaking Down the Single-Bottle Liquid Propane Gas Rack
- Video: A Closer Look at the Curt Roof Basket on a 2018 Subaru Forester
- Video: Hands-On with the Curt Roof Mounted Cargo Basket
- Video: Rhino-Rack Rooftop Cargo Bag Feature Review
- Video: Yakima Cargo Boxes T-Slot Kit Review
- Video: Installation Guide for the Inno Shaper 100 Roof Cargo Basket on a 2015 Toyota 4Runner
- Shop: Roof Rack
- Q&A: Can Single-Bottle Liquid Propane Gas Rack # 2020-JR be Mounted to Outside of Trailer
- Q&A: Will the Single-Bottle Liquid Propane Gas Rack Fit a Standard Size Propane Tank
- Q&A: Mounting Stromberg Carlson # 2020-JR Propane Tank Rack
- Q&A: Can the Complete Propane Tank Holder Also Hold 11-lbs Propane Tanks
- Q&A: Can Single-Bottle Liquid Propane Gas Rack Mount On Outside of Trailer
- Shop: Single-Bottle Liquid Propane Gas Rack
- Shop: Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 12,000 lbs
- Shop: Single Axle Trailer Fender w/ Backing Plate - Ribbed Steel - 13" to 14" Wheels - Qty 1
- Shop: Trailer Hitch
Frank
4/25/2024
One ground and ones running light. The yellow is for brake light . So my question is to spliceonto a 4 pin should I connect yellow, a three way splice between the turn signal wires and the yellow on plate lite.