There are a number of bright options for surface-mounted trailer tail lights, though all will be designed as brake, tail light and turn signals (you do not have to wire the turn signals and can simply tie that wire off on the light). The brightest…
I recommend using something like and L-bracket, such as #CE26098G, that you can attach to the top rail near the end of the trailer. Then you can attach a bracket such as #LPL55CB (may have to do some drilling/modify the L-bracket). Then you can…
Yes, the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK that you referenced can easily still work on your trailer that has the tires only 3 inches apart. The 3 inch distance you have now is pretty common for tandem axle trailers…
I'm not sure exactly which drive-on jack you currently have, but the Blaylock #EZ-JACK will provide 6 inches of lift, which should provide enough lift to allow you to change a flat tire. The jack is very easy to use, as you can see in the linked…
The part numbers you provided match up with the Replacement Phoenix USA Rear Wheel Center Cap part #PXPH1764 and Replacement Center Attachment Bolt part #PHX84FR. I don't have any way to verify these to the chassis but so long as the pictures…
Since your bracket and center bolt piece is damaged, I recommend to use the Phoenix USA Wheel Center Cap - 6-1/2" Axle Diameter part #PXQ2010L which comes with the replacement left hand threaded center bolt and bracket. The OEM replacement part…
Hey, thanks. You're not so bad yourself! Going to a larger tire size is possible but there are a few things to think about. Chief among these things is clearance. When going from an 8 inch tire to a 12 inch tire the diameter will increase by 4.4…
Is this for a front plate you are looking for a light for additional visibility? Or a license plate light for the rear and you want to use like 4-way trailer wiring connection?
The Peterson Trailer License Plate Bracket part #B440-09 will be an excellent option to replace the license plate bracket on a Malone trailer. It installs via the studs on the back of the driver taillight so it will be a direct fit.
Special trailer tires should always be inflated to the maximum psi pressure figure shown right on the tire sidewall. Always check pressure and inflate as needed with the tires cold, such as first thing in the morning. As you drive and as the daytime…
There are a few things that can cause the brakes to lock up on a trailer. First, disconnect the trailer from the vehicle. Then use a circuit tester like #PTW2979 if needed to test the connector on the vehicle. Have someone sit in the truck and run…
Filter Results
