Replacement Spindle For Jet Ski Trailer With 2,700 lb Capacity

Updated 10/30/2023 | Published 10/29/2023

Products Featured in This Question

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized

(483)

$53.63

#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

(110)

$63.49

Question:

Hi, I need some help with your products. I am looking for a weld-on spindle for a Load Rite double jet ski trailer 2,640 lb capacity. Torsion Axle is Autoflex-Knott 2700 Lb type: VG12/27-L. Shaft diameter 1-3/4 about 3 long. It uses 2 x L44649 bearings, 2 x L44610 races and seal 12192TB 1-1/16 straight. Current spindle has a break flange even though is not used. I would appreciate your help to find the right spindle in your website. Thanks

asked by: Jose C

Expert Reply:

Appreciate all that information, but unfortunately we do not have a 2,700 lb spindle, or one with those bearings and seal. The best I can offer is to go up to a 3,500 lb spindle, and you'd also need new hubs. What you can use is the following:

- #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR

- Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-K

I realize this isn't exactly what you were looking for, but I did want to mention it as an option for you. Just keep in mind these hubs have a 5 on 4-1/2" bolt pattern so be sure yours is the same (I have added a link below to a printable template if you aren't sure). They are also compatible with 13" to 17-1/2" wheels, which is likely what you have but it won't hurt to double check.

expert reply by: Kyle S